Overpower

# Overpower — Intel Core Ultra 7 165H + NVIDIA GeForce RTX 4070

The Intel Core Ultra 7 165H paired with the NVIDIA GeForce RTX 4070 delivers a consistently playable experience across Overpower's resolution and settings matrix. Measured data shows the combination holding above 56 FPS at every tested configuration, with the strongest results emerging at 1080p Low where average frame rates reach 153 FPS. The combination ranks 1574th out of 2980 tested combos in this game, placing it in the upper-middle tier of the database.

Resolution Scaling

The frame rate trajectory from 1080p to 4K reveals a predictable but telling pattern. At High settings, the average FPS drops from 89 at 1920x1080 to 79 at 2560x1440, then to 67 at 3840x2160. This represents a 9.0% decline from 1080p to 1440p, followed by a 15.2% decline from 1440p to 4K. The cumulative drop from 1080p to 4K is 24.7% — a relatively modest scaling penalty that suggests the GPU remains the dominant limiter throughout the resolution range.

Under Medium settings, the scaling curve behaves similarly. The average FPS moves from 96 at 1080p to 85 at 1440p, then to 73 at 4K. The percentage drops are 11.5% and 14.1% respectively, showing a slightly steeper initial penalty than High settings but a shallower second step. The Ultra preset tells a different story: 74 FPS at 1080p falls to 66 at 1440p (a 10.8% drop) and then to 56 at 4K (a 15.2% drop). The total Ultra scaling penalty from 1080p to 4K is 24.3%, nearly identical to the High preset's cumulative loss.

Low settings exhibit the least resolution sensitivity. The average FPS at 1080p is 153, dropping to 137 at 1440p (a 10.5% decline) and then to 116 at 4K (a 15.3% decline). The overall reduction from 1080p to 4K is 24.2%. Interestingly, the Low preset's absolute frame rates are dramatically higher — 153 FPS at 1080p versus 89 FPS at High — but the proportional scaling penalty is nearly identical across all four presets. This consistency indicates that Overpower's engine applies resolution overhead uniformly regardless of graphical complexity.

The 4K Ultra result of 56 FPS is the only measured configuration that dips below the 60 FPS threshold. This suggests that at the highest resolution and quality combination, the RTX 4070's rendering resources are fully saturated. The gap between 4K Ultra (56 FPS) and 4K High (67 FPS) is 11 FPS, while the gap between 4K Medium (73 FPS) and 4K High is only 6 FPS. The data indicates that the step from High to Ultra carries a disproportionately large performance cost at 4K, whereas the Medium to High transition is comparatively gentle.

Settings Recommendations

For players prioritizing frame rate smoothness, the Low preset at 1080p delivers the highest measured average at 153 FPS. However, this comes with the visual compromises inherent to the lowest quality tier. The Medium preset at 1080p offers a more balanced experience: 96 FPS average with a measured minimum of 81 FPS and maximum of 110 FPS. The narrow frame time variance at Medium settings indicates stable performance without significant hitches.

At 1440p, the Medium preset achieves 85 FPS average with a minimum of 73 FPS and maximum of 98 FPS. This configuration represents the sweet spot for players with 1440p displays who want both resolution fidelity and responsiveness. The High preset at 1440p delivers 79 FPS average, which remains playable but with less headroom above the 60 FPS floor. Moving to Ultra at 1440p drops the average to 66 FPS — functional but with only 6 FPS of buffer above the minimum playability threshold.

For 4K displays, the data suggests that High settings (67 FPS average) are the practical ceiling. The Medium preset at 4K reaches 73 FPS average with a minimum of 62 FPS, making it the safest choice for maintaining smooth gameplay without sacrificing too much visual detail. Ultra at 4K falls to 56 FPS, which risks perceptible stutter during demanding scenes. The Low preset at 4K, while achieving 116 FPS average, likely sacrifices too much visual quality to justify the frame rate gain.

The measured minimum and maximum values are only available for the Medium preset across all three resolutions. At 1080p Medium, the range spans 81 to 110 FPS (a 29 FPS spread). At 1440p Medium, the range narrows to 73 to 98 FPS (a 25 FPS spread). At 4K Medium, the range tightens further to 62 to 84 FPS (a 22 FPS spread). This trend indicates that frame time consistency improves at higher resolutions, likely because the GPU's workload becomes more uniform when pixel fill rate dominates.

FAQ

Q: What is the best resolution for this CPU-GPU combination in Overpower?

A: The measured data shows that 1440p Medium offers the best balance, delivering 85 FPS average with a 73 FPS minimum. This keeps frame rates comfortably above the 60 FPS threshold while maintaining a higher resolution than 1080p.

Q: Can this combo handle 4K gaming in Overpower?

A: Yes, but with caveats. At 4K High settings, the average FPS is 67, which is playable. At 4K Medium, the average rises to 73 FPS with a minimum of 62 FPS. The 4K Ultra preset drops to 56 FPS average, which falls below the ideal smoothness threshold.

Q: How much performance is lost by enabling Ultra settings instead of High?

A: At 1080p, the drop from High to Ultra is 15 FPS (89 to 74). At 1440p, the drop is 13 FPS (79 to 66). At 4K, the drop is 11 FPS (67 to 56). The proportional penalty increases with resolution, with Ultra costing 16.9% at 1080p, 16.5% at 1440p, and 16.4% at 4K.

Q: Does this setup ever drop below 60 FPS in the measured configurations?

A: Only one configuration falls below 60 FPS: 4K Ultra with an average of 56 FPS. All other tested settings and resolutions maintain averages above 66 FPS, with the 4K Medium minimum measured at 62 FPS.

Q: How does the Low preset compare to Medium in terms of frame rate gains?

A: The jump from Low to Medium costs between 23% and 37% of the Low preset's performance. At 1080p, Low delivers 153 FPS while Medium delivers 96 FPS — a 57 FPS difference. At 1440p, the difference is 52 FPS (137 to 85). At 4K, the difference is 43 FPS (116 to 73).

Q: Is the frame rate consistent across different resolutions?

A: The available minimum and maximum data for Medium settings shows that frame time variance shrinks as resolution increases. The 1080p Medium range is 81-110 FPS (29 FPS spread), 1440p Medium range is 73-98 FPS (25 FPS spread), and 4K Medium range is 62-84 FPS (22 FPS spread).

Measured FPS Breakdown

At 1920x1080, the full settings spectrum was tested. The Low preset achieves the highest average at 153 FPS, followed by Medium at 96 FPS (minimum 81, maximum 110), High at 89 FPS, and Ultra at 74 FPS. The gap between Low and Medium is substantial at 57 FPS, while the gap between Medium and High is only 7 FPS. The High to Ultra step costs another 15 FPS. This pattern suggests that the Low preset removes significant rendering overhead, while the Medium and High presets are comparatively close in demand.

At 2560x1440, the averages scale down proportionally. Low delivers 137 FPS, Medium achieves 85 FPS (minimum 73, maximum 98), High reaches 79 FPS, and Ultra settles at 66 FPS. The Low to Medium gap narrows to 52 FPS, while the Medium to High gap becomes just 6 FPS. The High to Ultra penalty is 13 FPS. The 1440p results show that the GPU's headroom at this resolution still allows for high frame rates on the Low preset, but the Ultra preset begins to approach the 60 FPS boundary.

At 3840x2160, the stress on the GPU becomes apparent. Low still delivers a robust 116 FPS, but Medium drops to 73 FPS (minimum 62, maximum 84), High manages 67 FPS, and Ultra falls to 56 FPS. The Low to Medium gap is 43 FPS, the Medium to High gap is 6 FPS, and the High to Ultra gap is 11 FPS. The 4K results indicate that players seeking maximum visual quality at this resolution will need to accept sub-60 FPS performance, while those willing to use Medium settings can maintain a playable 73 FPS average.

The only configuration with full minimum and maximum data is the Medium preset across all three resolutions. At 1080p, the spread between minimum and maximum is 29 FPS. At 1440p, the spread narrows to 25 FPS. At 4K, the spread tightens to 22 FPS. This suggests that the game's frame pacing becomes more consistent as the GPU becomes the primary bottleneck, with fewer CPU-induced spikes at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 4070 features 12 GB of GDDR6X memory on a 192-bit bus, delivering a memory bandwidth of 504.2 GB/s. The GPU operates at a base clock of 1920 MHz and boosts up to 2475 MHz. The memory clock runs at 1313 MHz, translating to 21 Gbps effective data rate. With 5888 shading units, 184 texture mapping units, and 64 raster output units, the RTX 4070 provides a substantial rendering foundation for Overpower's demands.

The GPU's 46 ray tracing cores and 184 tensor cores contribute to its DirectX 12 Ultimate (12_2) support, though the measured frame rates in this action game do not specifically isolate ray tracing performance. The 29.15 TFLOPS of FP32 compute and the matching FP16 throughput of 29.15 TFLOPS indicate a balanced compute architecture that handles both traditional rasterization and compute-heavy workloads effectively.

The 12 GB memory capacity is a notable asset for high-resolution gaming. At 4K with Ultra settings, the GPU maintains 56 FPS average, suggesting that the memory subsystem is not the limiting factor at this resolution. The 504.2 GB/s bandwidth provides ample headroom for texture streaming and geometry processing in Overpower's action sequences. The pixel rate of 158.4 GPixel/s and texture rate of 455.4 GTexel/s give the GPU sufficient fill-rate capacity for the measured resolutions.

The RTX 4070's 200 W TDP and dual-slot design indicate that this is a power-efficient implementation of the Ada Lovelace architecture. The 5 nm process node from TSMC, with 35,800 million transistors on a 294 mm² die, yields a transistor density of 121.8M per mm². This density contributes to the GPU's strong performance-to-power ratio, which is reflected in the benchmark results. The GPU's percentile ranking of 81 among all tested GPUs places it in the upper quintile of database entries.

CPU Role

The Intel Core Ultra 7 165H features 16 cores and 22 threads, combining performance and efficiency cores in the Meteor Lake architecture. The base clock runs at 3.80 GHz with a boost clock of 5.00 GHz. This mobile processor draws 28 W TDP and fits into the Intel BGA 2049 socket. The 7 nm process node from Intel, with its 112 KB L1 cache per core, 2 MB L2 cache per core, and 24 MB shared L3 cache, provides a solid foundation for gaming workloads.

The CPU's memory support includes DDR5 with dual-channel configuration and a memory bandwidth of 89.6 GB/s. The integrated graphics, Arc Xe-LPG with 128 execution units, are not utilized in this discrete GPU configuration but add flexibility for other use cases. The PCIe Gen 5 interface with 8 lanes (CPU only) ensures sufficient bandwidth for the RTX 4070's PCIe 4.0 x16 connection.

Benchmark data shows the CPU's capabilities: Cinebench R23 multicore score of 14,551 and singlecore score of 1,759. The Passmark multithread score of 25,933 and singlethread score of 3,509 further characterize the processor's performance. The average benchmark score of 34,083 places the Ultra 7 165H in the 84th percentile among all CPUs, indicating strong overall compute performance.

In Overpower, the CPU's role appears secondary to the GPU at higher resolutions. The measured FPS scaling from 1080p to 4K shows consistent percentage drops across all presets, suggesting that the GPU is the primary bottleneck. At 1080p Low, the 153 FPS average indicates that the CPU can feed the GPU sufficiently even at high frame rates. The 22 threads provide ample parallelism for game logic, physics, and AI workloads that Overpower's action genre typically demands.

How This Combo Ranks

The combination of the Intel Core Ultra 7 165H and NVIDIA GeForce RTX 4070 ranks 1574th out of 2980 tested combos in Overpower, placing it at approximately the 52.8th percentile of all combinations. This middle-tier ranking reflects the fact that while each component individually performs well — the CPU at the 84th percentile and GPU at the 81st percentile — the combination does not reach the top echelons of gaming performance.

Relative to the CPU's nearest rivals, the Ultra 7 165H is closely matched with several alternatives. The Intel Core Ultra 5 338H scores 33,989, a mere 0.3% lower. The AMD EPYC 4244P scores 34,220, putting the Ultra 7 165H 0.4% behind. The AMD Ryzen AI 7 350 scores 34,222, also 0.4% ahead. The AMD Ryzen 7 3700X scores 34,260, giving the Ultra 7 165H a 0.5% deficit. These tight margins indicate that the CPU selection has minimal impact on the overall combo ranking when paired with the same GPU.

The GPU's nearest rivals show a similar pattern. The NVIDIA Tesla P4 scores 37,628, just 0.1% behind the RTX 4070's 37,648. The AMD Radeon RX Vega 56 scores 37,507, a 0.4% deficit. The NVIDIA GeForce RTX 4080 Mobile scores 38,135, putting the RTX 4070 1.3% behind. The AMD Radeon PRO W6400 scores 37,157, giving the RTX 4070 a 1.3% advantage. These modest deltas suggest that the RTX 4070 sits in a densely populated performance band.

The combo's 1574th rank out of 2980 combinations indicates that while the hardware is capable, there are many higher-performing pairings in the database. The measured FPS data shows that this combo can handle Overpower at 1440p Medium with 85 FPS average, which is a solid result for a mobile CPU paired with a desktop-class GPU. The 4K Medium result of 73 FPS further demonstrates the combo's versatility, though the 4K Ultra result of 56 FPS reveals its limitations at the highest quality setting.