Overpower

Overpower

AVERAGE FPS
75
good

This combination provides smooth gameplay with an average of 75 FPS, suitable for most gaming scenarios.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 56 60 96
1440p QHD 54 66 71 113
1080p Full HD 61 74 79 127

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 96
3840x2160 Medium 60
3840x2160 High 56
3840x2160 Ultra 46
2560x1440 Low 113
2560x1440 Medium 71
2560x1440 High 66
2560x1440 Ultra 54
1920x1080 Low 127
1920x1080 Medium 79
1920x1080 High 74
1920x1080 Ultra 61

Overpower with Intel Core Ultra 5 125H + AMD Radeon 8050S, In-Depth Analysis

The Intel Core Ultra 5 125H paired with the AMD Radeon 8050S delivers a playable but demanding 4K experience in Overpower, with performance scaling that clearly places the GPU as the primary bottleneck at higher resolutions. The data shows a 56 FPS average at 4K High, dropping to 46 FPS at 4K Ultra—a 21% reduction that highlights the GPU’s limits. Meanwhile, at 1080p, the same settings yield 74 FPS, indicating that the CPU has sufficient headroom to keep up. This combination sits at rank 2751 out of 3713 tested combos in this game, placing it in the lower-mid tier, where users must trade off visual fidelity for smoothness.

Resolution Scaling

The performance curve from 1080p to 4K reveals a classic GPU-bound scenario. At 1080p High, the average FPS is 74, which falls to 66 at 1440p (an 11% drop) and then to 56 at 4K (a further 15% drop from 1440p). This progressive decline is steeper than what a purely CPU-limited system would produce, where the FPS would plateau once the CPU maxes out. The 4K-to-1080p ratio is about 0.76, meaning the system loses roughly 24% of its average FPS when moving from the lowest to highest resolution tested.

The scaling becomes more pronounced when looking at the Low settings. At 1080p Low, the system achieves 127 FPS, which drops to 113 at 1440p (an 11% decrease) and then to 96 at 4K (a 15% decrease from 1440p). This pattern indicates that even at lower graphical settings, the GPU is still the limiting factor, as the FPS scales inversely with pixel count. The CPU’s role is less prominent at these settings, as the frame rate is already high enough that the CPU does not become a bottleneck.

The Medium settings show a similar trend: 79 FPS at 1080p, 71 at 1440p, and 60 at 4K. The 4K Medium setting has a minimum FPS of 51 and a maximum of 69, indicating some frame time variability but still a playable average. The Ultra settings tell a harsher story: 61 FPS at 1080p, 54 at 1440p, and 46 at 4K. The 4K Ultra average is the lowest of all tested settings, showing that the GPU is thoroughly stressed at this quality level.

Because the FPS drop is proportional to pixel count, the data indicates a GPU-bound workload. The CPU, with its 14 cores and 18 threads, has enough power to feed the GPU at 1080p, but as resolution increases, the GPU’s limits become increasingly apparent. The 4K Ultra result of 46 FPS is below the 60 FPS target, which would require lowering settings to High or Medium for a smoother experience.

GPU Role

The AMD Radeon 8050S is an integrated graphics solution based on the RDNA 3.5 architecture, fabricated on a 4 nm process. It has 2048 shading units, 128 texture mapping units, and 64 raster output units, along with 32 ray tracing cores. Its base clock is 1295 MHz, with a boost clock of 2800 MHz. The GPU’s VRAM is system-shared, meaning it uses the system's main memory rather than dedicated VRAM, with a bandwidth that is system-dependent. This memory configuration is a key factor in its performance, as it can cause both performance and power consumption to vary depending on the system’s memory speed and capacity.

The GPU’s raw compute capabilities are 11.47 TFLOPS for FP32 and FP16, with a pixel rate of 179.2 GPixel/s and a texture rate of 358.4 GTexel/s. In terms of benchmark scores, it has a Geekbench OpenCL score of 65,818 and a Vulkan score of 58,398. Its average benchmark score is 62,108, placing it in the 89th percentile of all GPUs. The nearest rivals show a mixed picture: the AMD Radeon Pro W6600M is 0.3% ahead, while the AMD Radeon Pro Vega 56 is 2.5% behind, and the AMD Radeon RX 7600M is 2.6% behind. This puts the Radeon 8050S in a competitive position for an integrated GPU.

In Overpower, the GPU’s performance is clearly the main limiter at higher settings. At 4K Ultra, the FPS drops to 46, which is only 58% of the 1080p Ultra result of 61 FPS. This is a significant reduction, and it directly relates to the GPU’s memory architecture—since it shares system memory, the effective bandwidth is lower than a dedicated GPU with GDDR6 or similar, which becomes more critical at higher resolutions where more data needs to be transferred. The boost clock of 2800 MHz is substantial for an integrated GPU, but it cannot fully compensate for the lack of dedicated VRAM.

At 1080p Low, the GPU is less stressed, and the FPS averages 127, which is a solid result. The GPU’s performance is also reflected in its average benchmark score of 62,108, which is only 0.3% behind the Radeon Pro W6600M. This indicates that the GPU is capable of handling less demanding tasks, but Overpower’s high-quality settings push it to its limits. The GPU’s ray tracing cores are present but do not appear to be heavily utilized in this game, as the performance drop from High to Ultra is 25% (74 to 56 FPS at 1080p), which is more than what ray tracing would typically cause if it were a factor.

CPU Role

The Intel Core Ultra 5 125H is a 14-core, 18-thread processor based on the Meteor Lake architecture, with a base clock of 3.60 GHz and a boost clock of 4.50 GHz. It has a 28W TDP and is built on a 7 nm process. Its cache includes 112 KB L1 per core, 2 MB L2 per core, and 18 MB shared L3. The CPU supports DDR5 memory and uses a dual-channel memory bus with a bandwidth of 89.6 GB/s. It is a mobile processor with a production status of Active.

In CPU benchmarks, the Core Ultra 5 125H scores 12,804.5 in Cinebench R23 multi-core and 1,647.5 in single-core. Its average benchmark score is 27,507, placing it in the 79th percentile of all CPUs. The nearest rivals are the AMD Ryzen 7 5800 (27,535, delta -0.1%), Intel Core i5-12600K (27,578, delta -0.3%), AMD Ryzen 7 5700X (27,578, delta -0.3%), and AMD Ryzen 3 PRO 5355G (27,382, delta +0.5%). This shows that the CPU is nearly tied with these desktop processors, despite being a mobile chip.

In Overpower, the CPU’s performance is sufficient to not bottleneck the GPU at 1080p. The 1080p Low setting hits 127 FPS, which is likely close to the CPU’s limit, but the GPU still has headroom. The gap between 1080p Low and 1080p High is 74 FPS, which is a 42% difference, indicating that the GPU is the primary bottleneck. The CPU’s 14 cores and 18 threads are more than enough to handle the game’s workload, and the 4.50 GHz boost clock ensures single-threaded tasks are handled well.

At higher resolutions, the CPU’s influence diminishes further. The 4K Low setting shows 96 FPS, which is still above the 60 FPS mark, but the GPU’s limits are more apparent. The CPU’s memory bandwidth of 89.6 GB/s, combined with the GPU’s system-shared memory, means that the CPU and GPU compete for the same memory bandwidth, which could be a limiting factor at higher resolutions. However, this is not a hard constraint, as the 4K Low setting shows that the system can still achieve near-100 FPS.

The CPU’s benchmark results are impressive for a mobile processor, nearly matching the AMD Ryzen 7 5800. This indicates that the CPU is not a weak link in this system. The bottleneck is clearly the GPU, which is why the FPS scales so directly with resolution. For users with this combo, the CPU is not the limiting factor; the GPU’s shared memory and lower compute power are the main constraints.

FAQ

Q: Is this combo good for 4K gaming in Overpower?

A: The data shows a 4K High average of 56 FPS, which is playable but not ideal. For smoother performance, 1080p or 1440p with High settings is recommended, as the 4K Ultra drops to 46 FPS.

Q: How does the GPU compare to dedicated GPUs?

A: The Radeon 8050S is 0.3% behind the AMD Radeon Pro W6600M in average benchmark score, but it is an integrated GPU with system-shared memory. This means it may perform worse in memory-heavy scenarios like high-resolution textures.

Q: What is the CPU bottleneck?

A: The Core Ultra 5 125H is not a bottleneck in this game, as it has 14 cores and 18 threads. The 1080p Low setting achieves 127 FPS, indicating the CPU is not holding back performance.

Q: What is the best setting for a smooth experience at 1440p?

A: The 1440p Medium setting averages 71 FPS with a minimum of 60 FPS, which is smooth. For a higher average, 1440p Low hits 113 FPS.

Q: Does the system support ray tracing?

A: The GPU has 32 ray tracing cores and supports DirectX 12 Ultimate, but Overpower does not appear to be a ray tracing-heavy game, as the FPS drop from High to Ultra is not typical of ray tracing.

Q: Is the CPU comparable to desktop CPUs?

A: The CPU’s average benchmark score of 27,507 is nearly identical to the AMD Ryzen 7 5800 (27,535) and Intel Core i5-12600K (27,578), showing it is competitive with desktop processors.

How This Combo Ranks

The combo ranks 2751 out of 3713 tested combinations in Overpower, placing it in the lower 26th percentile. This means that 74% of tested combos perform better. The rank is likely lower due to the GPU’s shared memory and modest compute power, which becomes a significant bottleneck at higher resolutions. The CPU is not the limiting factor, as its performance is comparable to desktop parts, but the GPU’s integrated nature holds the system back.

For context, the GPU’s average benchmark score is 62,108, which is in the 89th percentile, but the combo rank is still low. This indicates that the GPU’s strengths are not fully utilized in this game, likely due to the memory bandwidth requirements of Overpower. The CPU’s performance is also strong, but the overall combo is held back by the GPU. This rank is a clear indicator that for Overpower, this combo is best suited for 1080p or 1440p with high refresh rates, rather than 4K Ultra.

Measured FPS Breakdown

1920x1080

  • Low: 127 FPS average
  • Medium: 79 FPS average (67 min, 91 max)
  • High: 74 FPS average
  • Ultra: 61 FPS average

2560x1440

  • Low: 113 FPS average
  • Medium: 71 FPS average (60 min, 81 max)
  • High: 66 FPS average
  • Ultra: 54 FPS average

3840x2160

  • Low: 96 FPS average
  • Medium: 60 FPS average (51 min, 69 max)
  • High: 56 FPS average
  • Ultra: 46 FPS average

The data shows a steady degradation as resolution and settings increase. At 1080p Low, the system is 127 FPS, which is capable of high refresh rates. At 1440p Medium, it drops to a 71 FPS average, which is still smooth. At 4K Ultra, the system is only 46 FPS, which is not ideal for a fast-paced action game. The minimum FPS at 4K Medium is 51, which is below the 60 FPS threshold, indicating some stutter in demanding scenes. The gap between Low and Ultra settings widens as resolution increases, confirming the GPU is the primary constraint.

The data indicates that the best experience in Overpower is at 1080p High or Ultra, where the system can maintain 61-74 FPS. For those with a 1440p monitor, Medium or High is the sweet spot, with 71-66 FPS. At 4K, the user must accept a 60 FPS average at Medium, or 56 FPS at High, which is still playable but not optimal. The CPU’s performance is consistent across all resolutions, so the GPU is the main factor in these results.

Hardware Specifications

Intel Core Ultra 5 125H

Cores / Threads 14 / 18
Base Clock 3600 MHz
Boost Clock 4500 MHz
TDP 28W
Socket Intel BGA 2049
View Full CPU Details →

AMD Radeon 8050S

VRAM System Shared System Shared
Base Clock —
Boost Clock 2800 MHz MHz
TDP 55 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 125H + AMD Radeon 8050S in Overpower

Resolution Settings Avg FPS
3840x2160 Low 96.0
3840x2160 Medium 60.0
3840x2160 High 56.0
3840x2160 Ultra 46.0
2560x1440 Low 113.0
2560x1440 Medium 71.0
2560x1440 High 66.0
2560x1440 Ultra 54.0
1920x1080 Low 127.0
1920x1080 Medium 79.0
1920x1080 High 74.0
1920x1080 Ultra 61.0

Overpower with iUltra 5 125H + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Other Games with iUltra 5 125H + 8050S

Explore FPS benchmarks for other games using this same hardware combination.