Overpower

Overpower, an action title from 2023, presents a demanding workload that scales predictably with resolution. The combination of the Intel Core i7-14700K and NVIDIA GeForce RTX 5090 D delivers exceptional frame rates across all tested settings, firmly establishing itself as a top-tier configuration. Benchmark results indicate that this pairing is capable of obliterating the 144 Hz barrier at 1080p and 1440p, while still maintaining highly playable frame rates at 4K. The data shows a system where the GPU becomes the primary scaling factor as resolution increases, but the CPU's robust multi-threading ensures that even at lower resolutions, the system never becomes a bottleneck, allowing for maximum performance output.

Resolution Scaling

The measured FPS data reveals a clear and consistent trend: performance decreases as resolution increases, a pattern that is entirely expected and highlights the growing load on the GPU. At 1080p with High settings, the system produces 189 FPS. Moving to 1440p at the same settings, the average FPS drops to 169, a reduction of 20 FPS. The step to 4K is more pronounced, with the frame rate falling to 144 FPS, which is 45 FPS lower than the 1080p result. This scaling behavior indicates that while the RTX 5090 D is immensely powerful, rendering at 4K requires significantly more pixel-pushing power, which proportionally reduces the output.

The scaling pattern is even more dramatic when looking at the Low preset. At 1080p Low, the system achieves a staggering 295 FPS, which is near the ceiling for what most displays can show. Dropping to 1440p Low yields 284 FPS, a negligible 11 FPS difference. However, at 4K Low, the frame rate drops to 248 FPS, a significant 36 FPS decrease from the 1440p result. This suggests that at lower settings, the game becomes less GPU-bound at 1080p and 1440p, allowing the CPU to push frame rates to their absolute maximum. The transition to 4K, however, re-engages the GPU as the primary limiting factor, causing the frame rate to drop in a more linear fashion.

This behavior is characteristic of a system where the GPU is the scaling component. At 1080p and 1440p, the RTX 5090 D has enough headroom that the game's engine and the CPU can feed it frames as fast as they can be rendered. The 4K resolution, with its 8.3 million pixels, presents a workload that is over 2.25 times larger than 1440p, which finally saturates the GPU's capabilities. The benchmark results indicate that the limiting component shifts decisively to the GPU at 4K, as evidenced by the larger frame rate drops between 1440p and 4K compared to the drops between 1080p and 1440p.

GPU Role

The NVIDIA GeForce RTX 5090 D is the undisputed workhorse of this configuration, and its specifications underscore its capability to handle Overpower's demanding visuals. The GPU is built on the Blackwell 2.0 architecture and features a massive 32 GB of GDDR7 memory on a 512-bit bus, providing a staggering 1.79 TB/s of memory bandwidth. This immense memory pool and bandwidth are crucial for 4K gaming, allowing the GPU to store and access the high-resolution textures and geometry data that Overpower requires without any performance stuttering. The 21,760 shading units and 176 ROPs ensure that the rasterization workload is processed with extreme efficiency.

The GPU's clock speeds are also a key factor in its performance. Operating at a base clock of 2017 MHz and a boost clock of 2407 MHz, the RTX 5090 D can dynamically increase its frequency to handle transient loads. This is particularly important in a fast-paced action game where the demand on the GPU can spike during intense combat or detailed environmental effects. The high boost clock allows the GPU to maintain peak performance in these scenarios, ensuring a smooth and responsive experience. The measured data shows that at 4K Ultra, the system still averages 119 FPS, evidence of the raw compute power of this GPU, which is rated at 104.8 TFLOPS FP32.

The GPU's role becomes more pronounced as resolution and settings increase. At 1080p Low, the GPU is likely not the bottleneck, but at 4K Ultra, it is the definitive limiting factor. The 32 GB of VRAM ensures that there is no memory capacity limitation at any tested resolution or setting, allowing the GPU to focus purely on computational throughput. The benchmark results indicate that the RTX 5090 D is not just a high-end card; it is a future-proofing investment that can handle the most demanding games at their highest settings, as evidenced by its performance in Overpower.

CPU Role

The Intel Core i7-14700K plays a crucial supporting role, ensuring that the RTX 5090 D is never starved of data. With 20 cores and 28 threads, the CPU is a multi-threading powerhouse, a fact confirmed by its Cinebench R23 multi-core score of 33440.5. This processing capability is essential for Overpower, which, like many modern action games, likely utilizes multiple cores for game logic, physics, and AI. The high thread count ensures that these background tasks do not interfere with the primary rendering pipeline, allowing the GPU to work at its full potential.

The CPU's clock speeds are equally important for gaming performance. With a base clock of 3.40 GHz and a boost clock of 5.60 GHz, the i7-14700K offers exceptional single-thread performance, as evidenced by its Geekbench single-core score of 2569. In gaming, the main game thread often relies on strong single-core performance to process input, run the game loop, and issue draw calls. The high boost clock ensures that this critical thread can execute as fast as possible, reducing latency and maximizing the frame rate. The benchmark data, particularly the high FPS at 1080p, suggests that the CPU is more than capable of feeding the GPU at lower resolutions.

The CPU's role is most apparent when comparing the 1080p and 1440p results. The relatively small performance drop when moving from 1080p to 1440p suggests that the CPU is handling the increased workload without becoming a bottleneck. However, the larger drop from 1440p to 4K confirms that the GPU is the scaling component. The i7-14700K's performance, with a PassMark multithread score of 52392 and an average benchmark score of 69355, places it in the 94th percentile of all CPUs, indicating it is an elite-level processor that can keep pace with the fastest GPUs on the market.

How This Combo Ranks

In the grand scheme of tested hardware configurations, this pairing of the Intel Core i7-14700K and NVIDIA GeForce RTX 5090 D is exceptional. The benchmark database places this exact combination at rank 15 out of 2980 combos for Overpower. This top 0.5% placement reflects the synergistic balance between the CPU and GPU. The data shows that this system is not just good; it is in the upper echelon of all possible builds, outperforming the vast majority of other pairings that have been measured.

This ranking is particularly impressive given the competition. The CPU's nearest rivals, such as the AMD Ryzen 9 7950X, show a negligible performance delta of -0.2%, indicating that the i7-14700K is on par with the best consumer CPUs. Meanwhile, the GPU's nearest rivals in the database, like the AMD Radeon RX 6850M XT, show a delta of -1.6%, but these are often different classes of hardware. The high combo rank suggests that while other components might individually score similarly, the specific combination of this 20-core CPU and this 32 GB GPU creates a uniquely powerful gaming platform for Overpower.

The ranking also indicates that this system is future-proof. Being ranked 15th out of 2980 means that it is at the very forefront of gaming performance. The data implies that users with this setup are unlikely to face any performance constraints in Overpower, regardless of the in-game action. This high rank is a direct result of the measured FPS, which shows the system consistently pushing frame rates that are far above the threshold for smooth gameplay, even at the most demanding 4K Ultra settings.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system's performance across different resolutions and settings. At 1080p, the system delivers outstanding results. On the Low preset, it achieves an average of 295 FPS, which is an extremely high frame rate that would satisfy even the most competitive esports players. The Medium preset yields 204 FPS with a minimum of 174 and a maximum of 235, showing a stable frame time. High settings produce 189 FPS, and even the Ultra preset maintains a high 157 FPS, ensuring that all settings are playable at 1080p.

Moving to 1440p, the performance remains remarkably high. The Low preset averages 284 FPS, which is still a phenomenal result. The Medium preset produces 182 FPS, with a minimum of 155 and a maximum of 209. High settings drop to 169 FPS, and Ultra settings average 140 FPS. These numbers indicate that 1440p gaming is a sweet spot for this combo, as it offers a significant visual upgrade over 1080p while still maintaining frame rates that are suitable for high-refresh-rate monitors.

At 4K, the system flexes its muscles, proving that it is a true 4K gaming powerhouse. The Low preset averages 248 FPS, which is still incredibly fast. The Medium preset produces 155 FPS, with a minimum of 132 and a maximum of 178, indicating smooth performance. High settings average 144 FPS, which is perfect for a 144 Hz display. The Ultra preset, the most demanding configuration, still manages an average of 119 FPS, which is highly playable and offers the best visual fidelity. This data shows that the system can handle 4K Ultra, but for the most fluid experience, High or Medium settings are recommended.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user's display and performance priorities. For users with a 1080p or 1440p monitor with a refresh rate of 144 Hz or higher, the High preset is the recommended choice. At 1080p High, the system delivers 189 FPS, and at 1440p High, it delivers 169 FPS, both of which comfortably exceed 144 FPS. This provides a perfect balance between visual quality and performance, ensuring a smooth and immersive experience. The Ultra preset is also viable, but the marginal visual gains over High are offset by a more significant frame rate drop.

For 4K users, the recommendation is more nuanced. If the display has a 144 Hz refresh rate, the High preset is the best option, as it averages exactly 144 FPS. This maximizes the display's potential without any wasted performance. If a 120 Hz display is in use, the Ultra preset, at 119 FPS, can be used to achieve the absolute best image quality, as it nearly matches the display's refresh rate. For those who prefer a higher frame rate buffer or have a 240 Hz display, the Medium preset, at 155 FPS, is a strong choice, offering a significant performance boost over High while still looking substantially better than Low.

Ultimately, the benchmark results indicate that there is no "wrong" setting on this system, as even the most demanding configuration yields a playable frame rate. The Low preset, while delivering the highest frame rates (295 FPS at 1080p), should be avoided for a game like Overpower, as the visual compromise is likely too severe. The Medium and High presets provide the best balance of visual fidelity and performance, ensuring a smooth and responsive experience across all resolutions. The data strongly suggests that users should prioritize the High preset for a universally excellent experience, or the Ultra preset for those seeking maximum visual quality at 4K on a 120 Hz display.