Overpower

The Intel Core i7-12700KF paired with the Intel Arc B390 presents a striking imbalance in Overpower. This is a configuration where a high-end 12th Gen desktop processor is coupled with an integrated-class GPU, and the benchmark data reflects that disparity clearly. The CPU is a powerhouse, but the GPU is the definitive bottleneck in this action game, capping performance at levels that will require significant settings adjustments for a smooth experience.

Resolution Scaling

The FPS data across resolutions tells a clear story about where the performance ceiling lies. Starting at 1920x1080 with Low settings, the combo achieves 72 FPS. When moving to 2560x1440 at the same Low preset, the average drops to 64 FPS, a reduction of 8 FPS. Pushing further to 3840x2160 at Low yields 54 FPS, another 10 FPS decline. This pattern is consistent and shows a relatively gentle slope as resolution increases, which is typical when the GPU is the limiting factor. The Arc B390 is working harder at higher resolutions, but the frame rate penalty is not catastrophic because the Low preset is relatively light on the GPU.

The scaling becomes more punishing when the settings are raised. At Medium settings, the drop from 1080p (45 FPS) to 1440p (40 FPS) is 5 FPS, and then from 1440p to 4K (34 FPS) is another 6 FPS. This steeper decline indicates that the GPU is becoming saturated much faster as both resolution and graphical load increase. The data suggests that the Arc B390’s compute and memory resources are quickly exhausted, making the jump to 4K a significant burden. The difference between 1080p and 4K at Medium settings is 11 FPS, a 24% reduction from the baseline, which is a substantial hit.

At the highest settings, the trend continues but with less headroom to lose. High settings produce 42 FPS at 1080p, 37 FPS at 1440p, and 32 FPS at 4K. The Ultra preset shows the most pronounced scaling issues, with 35 FPS at 1080p, 31 FPS at 1440p, and a mere 26 FPS at 4K. The fact that the 4K Ultra score is just 26 FPS, which is below the 30 FPS threshold for playable, strongly indicates that the GPU is the sole limiting factor. A more powerful CPU would not help here; the data points to the Arc B390’s inability to process the frame geometry and shading at higher resolutions and settings.

CPU Role

The Intel Core i7-12700KF is a 12-core, 20-thread processor based on the Alder Lake architecture, with a base clock of 3.60 GHz and a boost clock of 5.00 GHz. In the context of Overpower, the CPU’s role is to feed the GPU with draw calls and game logic. The benchmark results show that the CPU is not the bottleneck in this pairing. At 1080p Low, the system achieves 72 FPS, which is a solid frame rate that indicates the CPU can handle the game's simulation and physics at that level. The processor’s performance is further evidenced by its Cinebench R23 multi-core score of 28838 and single-core score of 4071, which are robust numbers for a desktop part.

However, the CPU’s potential is left untapped. The data shows that as settings and resolution increase, the FPS drops, which is a classic sign of GPU limitation. The CPU is capable of generating far more frames than the Arc B390 can render. The fact that the FPS at 1080p Low (72) is nearly three times higher than at 4K Ultra (26) demonstrates that the processor can push a high frame rate, but the GPU cannot keep up when the pixel count and shading complexity rise. The i7-12700KF’s 25 MB of shared L3 cache and high boost clock are more than sufficient for this game, and its performance is not the limiting factor in any of the measured rows.

The processor’s benchmark scores place it in the 85th percentile of all CPUs, with an average benchmark score of 35365. Its nearest rivals include the Intel Core i7-13700T (deltaPct -0.1) and the Intel Core i5-13600T (deltaPct 0.2), showing that it is competitive with those parts in general compute performance. In Overpower, this translates to a CPU that will not hold back the system, but the GPU will. The data suggests that pairing this CPU with a more powerful discrete GPU would yield significantly higher frame rates, as the processor has ample headroom to support a much faster graphics card.

Settings Recommendations

The measured FPS rows provide a clear guide for the best experience with this combo. The most balanced choice for a playable frame rate is the Medium preset. At 1920x1080, it delivers 45 FPS, which is a reasonable level for an action game. The minimum FPS at this setting is 38, and the maximum is 52, showing some frame time variance but generally staying in an acceptable range. Moving to 2560x1440 at Medium drops the average to 40 FPS, which is still playable but begins to feel less smooth. At 4K, the Medium preset falls to 34 FPS, which is below the ideal threshold for fluid gameplay.

The Low preset is the only way to achieve high refresh rates with this hardware. At 1080p, it hits 72 FPS, which is excellent for fast-paced action. Even at 1440p, Low provides 64 FPS, which is very good. At 4K, Low still manages 54 FPS, a significant jump from the Medium and High presets. The trade-off is visual fidelity, but for a game like Overpower, the smoothness of motion is often more important than shadows and texture detail. The data indicates that Low is the only preset that can consistently push above 60 FPS at 1080p and 1440p.

The High and Ultra presets are not recommended for this combo. At 1080p, High provides 42 FPS, and Ultra drops to 35 FPS. At 1440p, these numbers fall to 37 and 31 FPS, respectively. At 4K, High yields 32 FPS and Ultra just 26 FPS. These frame rates are too low for a responsive experience. The data shows that the visual uplift from Medium to High or Ultra does not justify the significant performance cost. A practical approach is to use the Low preset for competitive play or the Medium preset for a more visually rich experience, accepting frame rates in the 40-45 FPS range at 1080p.

How This Combo Ranks

In the overall rankings for Overpower, this specific combination of the Intel Core i7-12700KF and Intel Arc B390 is placed at rank 2638 out of 2980 tested combos. This places it in the lower percentile of systems, which is expected given the GPU’s performance class. The rank is a direct consequence of the GPU’s limitations, not the CPU’s. The data shows that the Arc B390 is a weak performer, and its pairing with a high-end CPU does not change its fundamental capability in this game.

The combo’s rank of 2638 highlights that despite having a top-tier processor, the overall frame rates are low. This is a crucial point of analysis: the CPU’s high performance is essentially wasted in this configuration for Overpower. The benchmark results indicate that the system is held back by the GPU, and this is reflected in the low rank. The fact that the combo sits in the 11th percentile (approximately, given the rank) of all tested systems shows that most other hardware pairings will deliver better frame rates.

The data suggests that this combo is not a viable choice for playing Overpower at high settings or high resolutions. The rank is a clear indicator that the system’s performance is far from the top tier. For a user with this CPU, the recommendation is clear: the GPU must be upgraded to achieve a reasonable experience in this game. The rank is not a reflection of the CPU’s prowess but rather a warning about the severe imbalance in this particular pairing.

GPU Role

The Intel Arc B390 is the primary performance limiter in this system. Its specifications, including a base clock of 300 MHz and a boost clock of 2500 MHz, are not the issue; the problem is its memory configuration. The GPU uses "System Shared" memory, which means it relies on the system’s main RAM rather than dedicated VRAM. This architecture is a major handicap in a demanding game like Overpower, as the bandwidth to system memory is insufficient for high-resolution textures and complex scenes.

The GPU’s benchmark score in 3DMark Steel Nomad DX12 is 1482, which places it in the 9th percentile of all GPUs. Its nearest rivals are the NVIDIA GeForce GT 520MX (deltaPct 1.3) and the NVIDIA GeForce GT 710 (deltaPct 2.7), which are extremely old and low-end parts. This clearly shows that the Arc B390 is classified as an entry-level or integrated solution, not a discrete gaming card. The 7.680 TFLOPS of FP32 performance is theoretically decent, but the memory bottleneck and lack of dedicated VRAM severely hamper real-world gaming performance.

The measured FPS data confirms the GPU’s role as the bottleneck. The fact that the frame rate scales so heavily with resolution and settings points directly to the GPU being saturated. The system’s inability to maintain 60 FPS at 1080p on any preset other than Low is a direct result of the GPU’s limitations. The "System Shared" memory architecture means that the GPU is competing with the CPU for memory bandwidth, which is an inefficient design for gaming. The data shows that the Arc B390 is simply not capable of handling the demands of Overpower at playable settings, regardless of the CPU’s power.

Measured FPS Breakdown

The following data provides a complete breakdown of the measured performance for this combo in Overpower.

At 1920x1080, the results are as follows:

• Low: 72 FPS average.
• Medium: 45 FPS average, with a minimum of 38 FPS and a maximum of 52 FPS.
• High: 42 FPS average.
• Ultra: 35 FPS average.

At 2560x1440, the results are:

• Low: 64 FPS average.
• Medium: 40 FPS average, with a minimum of 34 FPS and a maximum of 46 FPS.
• High: 37 FPS average.
• Ultra: 31 FPS average.

At 3840x2160, the results are:

• Low: 54 FPS average.
• Medium: 34 FPS average, with a minimum of 29 FPS and a maximum of 39 FPS.
• High: 32 FPS average.
• Ultra: 26 FPS average.

The data shows a clear and consistent pattern. The Low preset is the only one that provides a consistently playable experience across all resolutions. The Medium preset offers a balanced experience at 1080p but falls below 40 FPS at higher resolutions. The High and Ultra presets are not viable for smooth gameplay, with 4K Ultra being the worst at just 26 FPS. The frame rate variance at Medium settings is also notable, with a 14 FPS spread between the minimum and maximum at 1080p, which can lead to noticeable stuttering. Overall, the measured numbers indicate that this combo is best suited for 1080p gaming with the Low preset, or 1440p with significant settings compromises.