Overpower

The Intel Core i5-12600KF paired with the AMD Radeon RX 6750 XT delivers a well-balanced gaming experience in Overpower, with the combination ranking in the 846th position out of 1744 tested configurations. This places the pairing in the upper-middle tier of the database, indicating that it can handle the game’s demands without major bottlenecks, though it is not at the absolute top of the performance charts. The benchmark data reveals a system that is clearly GPU-limited at higher resolutions, but which also shows some CPU dependency at lower settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Intel Core i5-12600KF is a 10-core, 16-thread processor based on the Alder Lake architecture, with a base clock of 3.70 GHz and a boost clock of 4.90 GHz. It supports both DDR4 and DDR5 memory through a dual-channel memory bus, and it uses the Intel Socket 1700 platform. The processor’s 20 MB of shared L3 cache and per-core L1 and L2 caches (80 KB and 1.25 MB respectively) provide ample fast storage for game data.

In synthetic benchmarks, this CPU posts a Cinebench R23 multicore score of 23444 and a single-core score of 3309, which are strong results for a desktop part. Its Geekbench scores of 12373 (multicore) and 2529 (single-core) reinforce this, as does a PassMark multithread score of 27575. The processor sits at the 84th percentile of all CPUs, with an average benchmark score of 27827. Notably, the closest rival, the Intel Core i9-10900K, scores nearly identically at 27829, showing a 0% delta. The i5-12600K scores 27851, which is 0.1% higher, and the Intel Core Ultra 5 125H scores 27872, 0.2% higher; only the Intel Core i7-13700H scores slightly lower at 27716, a 0.4% difference.

For Overpower, the CPU’s high single-thread performance is crucial for the game’s core logic and physics, while the 16 threads ensure that background tasks and any multi-threaded game systems do not cause hitches. The data shows that at 1080p with Low settings, the average FPS is 163.4, which is significantly higher than the 125.2 FPS seen at 4K Low. This gap indicates that while the CPU can push over 160 frames per second, the GPU becomes the limiting factor as resolution increases and pixel throughput demands rise.

Settings Recommendations — which preset gives the best experience per the measured rows

Looking at the measured FPS rows, the most sensible preset for a smooth experience depends on the target resolution. At 1080p, the Medium preset yields 98.4 FPS, while High gives 97.2 FPS — a negligible difference of 1.2 FPS. Ultra drops to 80.5 FPS. Since the jump from Medium to High costs almost nothing in performance, High is the better choice at 1080p for improved visual fidelity without sacrificing frame rate.

At 1440p, the pattern shifts. Medium produces 93 FPS, and High produces 84.6 FPS, a difference of 8.4 FPS. Ultra falls to 68.3 FPS. Here, Medium is the safer pick if you want to stay well above 90 FPS, but High remains playable if you prefer sharper textures. For 4K, the situation is more constrained: Medium delivers 77 FPS, High delivers 71.7 FPS, and Ultra drops to 56.9 FPS. The data suggests that Medium is the balanced choice at 4K, as it keeps the frame rate above 60 FPS while the higher presets push closer to the boundary of smoothness.

The Low preset offers the highest FPS at every resolution — 163.4 at 1080p, 143.2 at 1440p, and 125.2 at 4K — but this comes with the expected visual compromises. Given the measured rows, High at 1080p, Medium at 1440p, and Medium at 4K represent the best performance-to-quality trade-offs for this hardware combination.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The FPS scaling across resolutions clearly indicates that the AMD Radeon RX 6750 XT is the primary bottleneck in this system for Overpower. Starting at 1080p with High settings, the average FPS is 97.2. Moving to 1440p High drops this to 84.6 FPS, a reduction of 12.6 FPS or roughly 13%. Pushing further to 4K High yields 71.7 FPS, another 12.9 FPS drop from 1440p.

This pattern is consistent across all settings. With Low settings, the drop from 1080p (163.4 FPS) to 1440p (143.2 FPS) is 20.2 FPS, and then to 4K (125.2 FPS) is another 18 FPS. The fact that even at Low settings the 4K frame rate is only 125.2 FPS, while the CPU is capable of 163.4 FPS at 1080p, shows that the GPU’s pixel throughput is the limiting factor at higher resolutions.

If the CPU were the constraint, we would expect the FPS to remain relatively flat across resolutions, as the CPU’s workload is largely resolution-independent. Instead, the steady decline in FPS as resolution increases is a classic sign of GPU saturation. The RX 6750 XT’s 12 GB of GDDR6 memory and 432.0 GB/s bandwidth are sufficient for the game’s textures, but the raw compute power of its 2560 shading units is what dictates the frame rate at higher pixel counts.

FAQ

Q: Is the Intel Core i5-12600KF a bottleneck for the RX 6750 XT in Overpower?

A: No, the data suggests the GPU is the limiting factor. At 1080p Low, the system achieves 163.4 FPS, but at 4K Low it drops to 125.2 FPS. This resolution-dependent drop indicates the RX 6750 XT is fully utilized before the CPU becomes a constraint.

Q: What is the best setting for a 60 FPS target at 4K?

A: The Medium preset at 3840x2160 delivers an average of 77 FPS, which is comfortably above 60. The High preset at 71.7 FPS also meets this target, but Medium offers more headroom for demanding scenes.

Q: How does this CPU compare to the Intel Core i9-10900K?

A: The two are virtually identical in average benchmark score: the i5-12600KF scores 27827, while the i9-10900K scores 27829, a 0% delta. In Overpower, you would expect no meaningful difference in performance.

Q: Does the RX 6750 XT have enough VRAM for Overpower at 4K?

A: The GPU has 12 GB of GDDR6 memory. The measured FPS at 4K Ultra is 56.9, which suggests the memory capacity is not causing a hard limit, but the compute performance is the main factor in the frame rate drop from lower resolutions.

Q: What is the FPS difference between Low and Ultra at 1440p?

A: At 2560x1440, the Low preset averages 143.2 FPS, while Ultra averages 68.3 FPS. This is a difference of 74.9 FPS, showing that the Ultra preset demands significantly more GPU resources.

Q: Is this CPU good for other tasks besides gaming?

A: Yes. Its Cinebench R23 multicore score of 23444 and PassMark multithread score of 27575 indicate strong productivity performance, placing it at the 84th percentile of all CPUs.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 6750 XT is built on the RDNA 2.0 architecture with the Navi 22 chip, fabricated on a 7 nm process at TSMC. It features a base clock of 2150 MHz and a boost clock of 2600 MHz, with a game clock of 2495 MHz. The memory runs at 2250 MHz, translating to 18 Gbps effective, across a 192-bit bus, providing 432.0 GB/s of bandwidth. The 12 GB of GDDR6 memory is ample for Overpower’s texture loads, and the GPU’s 2560 shading units, 160 TMUs, and 64 ROPs deliver a peak FP32 performance of 13.31 TFLOPS.

In the benchmark database, the RX 6750 XT sits at the 79th percentile of all GPUs, with an average benchmark score of 35327. Its nearest rivals are the AMD Radeon RX 5600M (score 35264, 0.2% lower), the NVIDIA GeForce RTX 5070 Ti Mobile (score 35435, 0.3% higher), the AMD Radeon 880M (score 35646, 0.9% higher), and the NVIDIA GeForce RTX 3080 (score 35787, 1.3% higher). These close margins show that the RX 6750 XT is competitive with a wide range of other cards, but it is not a top-tier performer.

For Overpower, the GPU’s role is most evident in the resolution scaling. At 1080p, the card can push 163.4 FPS on Low, but at 4K it drops to 125.2 FPS on the same preset. The Ultra preset at 4K yields only 56.9 FPS, which is below the 60 FPS threshold many players target. This indicates that the GPU’s compute power, rather than its memory subsystem, is the limiting factor at high resolutions in this game.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data for Overpower is presented across three resolutions and four settings presets. At 1920x1080, the Low preset averages 163.4 FPS. Medium averages 98.4 FPS, and High averages 97.2 FPS — a difference of only 1.2 FPS between the two. Ultra drops to 80.5 FPS.

At 2560x1440, Low averages 143.2 FPS, Medium averages 93 FPS, High averages 84.6 FPS, and Ultra averages 68.3 FPS. The gap between Medium and High here is 8.4 FPS, which is more pronounced than at 1080p.

At 3840x2160, Low averages 125.2 FPS, Medium averages 77 FPS, High averages 71.7 FPS, and Ultra averages 56.9 FPS. This is the only resolution where the Ultra preset falls below 60 FPS, making it the least viable option for a smooth experience. Across all resolutions, the Low preset offers the highest FPS, but the Medium preset provides a more balanced experience, with the 4K Medium result of 77 FPS being particularly notable for maintaining high frame rates at the highest pixel count.