Overpower

The Intel Core i5-12400 and AMD Radeon RX 7700 combination delivers a solid 1080p and 1440p experience in Overpower, but the data shows a clear shift in bottlenecks as resolution increases. At 1080p, the system produces high frame rates that suggest a balanced workload, while at 4K, the GPU becomes the primary limiting factor, with frame rates dropping significantly. This analysis breaks down the measured performance, scaling characteristics, and component roles based strictly on the provided benchmark data.

Resolution Scaling

The measured FPS data reveals a consistent and predictable decline in performance as resolution scales from 1920x1080 to 3840x2160. At the Ultra settings, the average frame rate drops from 78 FPS at 1080p to 70 FPS at 1440p, and further down to 59 FPS at 4K. This represents a 24% reduction in performance from 1080p to 4K, indicating that the rendering load increases substantially with pixel count.

For High settings, the scaling is similar: 94 FPS at 1080p, 84 FPS at 1440p, and 71 FPS at 4K. The delta between 1080p and 4K here is 23 FPS, or roughly a 24% drop. The Medium preset shows 102 FPS at 1080p, 91 FPS at 1440p, and 77 FPS at 4K, with the 4K figure falling 25 FPS short of the 1080p result. The Low preset exhibits the largest absolute drop, from 163 FPS at 1080p to 145 FPS at 1440p and 123 FPS at 4K—a 40 FPS difference between the extremes.

The pattern across all settings indicates that the frame rate penalty from 1080p to 4K is roughly 24-25% for the higher presets, while the Low preset incurs a slightly larger 24.5% penalty. This relatively consistent percentage drop suggests that the GPU's fillrate and memory bandwidth are being taxed proportionally as resolution increases. The fact that the drop from 1080p to 1440p is smaller (roughly 10-11% across presets) than the drop from 1440p to 4K (roughly 15-16%) points to the RX 7700's 16 GB of GDDR6 memory and 624.1 GB/s bandwidth being sufficient for 1440p but becoming a constraint at 4K.

The data suggests that at 1080p, the system is likely not fully GPU-bound, as the CPU's 6 cores and 12 threads can keep up with the frame rates being produced. However, at 4K, the GPU's compute resources—2560 shading units and 96 ROPs—become the limiting factor, as evidenced by the sub-60 FPS results at Ultra settings. The scaling behavior is typical for a mid-range GPU paired with a capable mainstream processor: the CPU has headroom at lower resolutions, but the GPU's raw throughput caps performance as pixel workload grows.

FAQ

*Q: What is the best resolution for this CPU-GPU combo in Overpower?*

A: Based on the measured data, 2560x1440 offers the best balance. At High settings, the system produces 84 FPS average, which is smooth for action gameplay. While 1080p yields higher frame rates (94 FPS at High), the visual fidelity improvement at 1440p justifies the 10 FPS sacrifice, and the system still maintains 70 FPS at Ultra settings.

Q: How does the RX 7700 perform at 4K in this game?

A: The 4K results are playable but not ideal for high-refresh displays. At High settings, the average is 71 FPS, which is above the 60 FPS threshold. However, Ultra settings drop to 59 FPS average, indicating that 4K requires turning down settings to maintain smooth gameplay. The Low preset at 4K achieves 123 FPS, showing the GPU has headroom if visual quality is reduced.

*Q: Is the Core i5-12400 holding back performance in Overpower?*

A: The data suggests minimal CPU bottleneck. At 1080p Low, the system reaches 163 FPS, which is a high frame rate that would stress many processors. The CPU's Cinebench R23 multi-core score of 15989 and single-core score of 2257 indicate strong gaming performance for a 6-core part. The scaling pattern from 1080p to 4K points to the GPU becoming the limiter as resolution increases.

Q: What is the difference between Medium and High settings at 1440p?

A: At 2560x1440, the Medium preset averages 91 FPS, while High averages 84 FPS—a 7 FPS difference. The Medium preset also has a minimum FPS of 77 and maximum of 104, while High has no min/max data provided. The 8% performance gap suggests High is a reasonable choice if visual quality is prioritized, as the frame rate remains above 80 FPS.

Q: How does this combo rank among all tested configurations?

A: The combination ranks 1340 out of 2980 tested combos in Overpower, placing it in the 55th percentile of all configs. This indicates it performs better than the median system but is not a top-tier setup. The GPU's average benchmark score is 15852, which puts it at the 58th percentile among all GPUs.

Q: Should I use Ultra settings at 1080p?

A: At 1920x1080, Ultra settings produce 78 FPS average, which is playable. However, the High preset achieves 94 FPS, a 16 FPS improvement. Given that the Ultra preset at 1440p only manages 70 FPS, the 1080p Ultra result of 78 FPS suggests that the visual quality increase from High to Ultra may not be worth the frame rate penalty for competitive play.

GPU Role

The AMD Radeon RX 7700 is the dominant component in this pairing, and its specifications directly explain the game's performance characteristics. The GPU features 16 GB of GDDR6 memory on a 256-bit bus, providing 624.1 GB/s of bandwidth. This memory configuration is substantial for a mid-range card and allows the GPU to handle high-resolution textures without capacity issues, as evidenced by the 4K results remaining playable at 71 FPS on High settings.

The clocks are notable: a base of 1900 MHz, a game clock of 2041 MHz, and a boost of 2459 MHz. The boost behavior is critical for frame rate stability, and the measured 4K Medium results show a minimum FPS of 65 and maximum of 89, indicating that the GPU maintains reasonably consistent performance under load. The 40 ray tracing cores and 96 ROPs contribute to the card's ability to handle the action genre's visual effects, though the game's specific implementation is not detailed in the data.

The GPU's compute capabilities are strong, with an FP32 throughput of 25.18 TFLOPS and a texture rate of 393.4 GTexel/s. These figures explain why the card can produce 163 FPS at 1080p Low settings—the raw math throughput is sufficient for lighter workloads. However, at 4K Ultra, the average drops to 59 FPS, showing that the pixel fillrate of 236.1 GPixel/s becomes a limiting factor when rendering four times the pixels of 1080p.

The GPU's 58th percentile ranking among all GPUs and its average benchmark score of 15852 place it in the mid-range tier. When compared to its nearest rivals, the RX 7700 is 1.7% behind the NVIDIA GeForce RTX 3060 Ti in average score, and 1% behind the AMD Radeon RX 9060. This positions it as a competitive option for 1080p and 1440p gaming, which aligns with the measured Overpower results showing strong performance at those resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target resolution and frame rate preference. At 1920x1080, the High preset offers the best balance at 94 FPS average, providing a comfortable margin above 60 FPS for smooth gameplay. The Ultra preset at 78 FPS is still playable, but the 16 FPS loss from High is significant. The Medium preset at 102 FPS is the fastest option for competitive play, though it sacrifices visual quality.

At 2560x1440, the High preset at 84 FPS is the recommended choice for most users. It maintains a frame rate above 80 FPS, which is suitable for action games. The Medium preset at 91 FPS offers a small 7 FPS improvement, but the visual quality difference between Medium and High is typically noticeable in modern games. The Ultra preset at 70 FPS dips below the 75 FPS threshold that many players consider ideal, making it less desirable for fast-paced action.

For 3840x2160, the High preset at 71 FPS is the only recommended option, as it stays above 60 FPS. The Medium preset at 77 FPS provides a slight buffer, but the Low preset at 123 FPS is the only setting that offers high-refresh-rate performance at 4K. Ultra at 59 FPS is borderline, but the sub-60 average makes it risky for maintaining smooth gameplay during intense scenes.

The data shows that the High preset is the "sweet spot" across all resolutions, providing the best combination of visual fidelity and frame rate. The Medium preset is a viable alternative for those seeking higher FPS, while Ultra should only be used at 1080p where the performance impact is less severe.

Measured FPS Breakdown

At 1920x1080, the full range of settings produces the following average frame rates: Low at 163 FPS, Medium at 102 FPS (with min/max of 86/117), High at 94 FPS, and Ultra at 78 FPS. The Low setting is dramatically faster than the others, indicating that the game's low preset removes significant GPU load. The Medium preset's minimum of 86 FPS shows that even in demanding scenes, the system maintains a framerate above 85 FPS.

At 2560x1440, the averages are: Low at 145 FPS, Medium at 91 FPS (min/max 77/104), High at 84 FPS, and Ultra at 70 FPS. The difference between Medium and High is 7 FPS, while the gap from High to Ultra is 14 FPS, suggesting that Ultra settings impose a heavy load on the GPU. The Medium preset's minimum of 77 FPS indicates that 1440p gaming is stable, with no drops below the 60 FPS threshold.

At 3840x2160, the averages are: Low at 123 FPS, Medium at 77 FPS (min/max 65/89), High at 71 FPS, and Ultra at 59 FPS. This resolution shows the most significant performance degradation. The Ultra preset falls below 60 FPS, which is a critical threshold for smooth gameplay. The Medium preset's minimum of 65 FPS is still above 60, but it's close to the edge, suggesting that 4K gaming requires careful settings management.

The progression from Low to Ultra at each resolution shows a consistent pattern: Low is roughly 60-70% faster than Medium, Medium is 8-10% faster than High, and High is 12-16% faster than Ultra. This indicates that the Ultra preset includes effects that heavily tax the GPU, potentially related to the ray tracing capabilities of the RX 7700's 40 RT cores.

CPU Role

The Intel Core i5-12400 plays a supporting role in this configuration, and its specifications provide context for the game's performance. The CPU features 6 cores and 12 threads, with a base clock of 2.50 GHz and a boost clock of 4.40 GHz. This is a mainstream desktop processor from the Core 12th Gen series, built on the Alder Lake architecture using a 10 nm process from Intel.

The CPU's benchmark scores indicate strong gaming capability. Its Cinebench R23 multi-core score of 15989 and single-core score of 2257 show that it can handle both multithreaded workloads and single-threaded game logic. The Geekbench single-core score of 1848 and 3DMark single-thread score of 910 further confirm its ability to drive high frame rates at lower resolutions.

In Overpower, the CPU's impact is visible in the 1080p results. At 1080p Low, the system achieves 163 FPS, which is a high frame rate that requires a capable processor. The fact that the 1080p Ultra result of 78 FPS is only 7 FPS higher than the 1440p High result of 71 FPS suggests that the CPU is not a significant bottleneck at these settings—the GPU is the limiting factor.

The CPU's 18 MB of shared L3 cache and 1.25 MB L2 cache per core provide adequate memory hierarchy for game data. The 12 threads allow for efficient handling of background tasks and game logic threads. The CPU's average benchmark score of 18683 places it at the 72nd percentile among all CPUs, and its nearest rivals include the AMD EPYC 7643 (0.1% faster) and Intel Core i7-1355U (0.3% faster), indicating it is a well-rounded performer.

The data shows that the i5-12400 is not holding back the RX 7700 in Overpower. The scaling from 1080p to 4K follows the GPU's expected performance curve, and the CPU's single-thread performance of 2257 in Cinebench R23 is sufficient to feed the GPU at frame rates up to 163 FPS. For users considering this combo, the CPU provides a solid foundation for the GPU's capabilities, with no evidence of a CPU-induced performance ceiling in the measured results.