Overpower

# Overpower Performance Analysis: Intel Core i5-10400F + AMD Radeon RX 9070 XT

The measured frame rates for this combination in Overpower show a system that delivers strong 1080p and 1440p performance while maintaining playable frame rates at 4K across all tested settings. The pairing of a 6-core Comet Lake processor with AMD's RDNA 4.0 flagship produces a consistent scaling pattern from 1080p through 2160p, with the GPU becoming the primary bottleneck as resolution increases. The data set spans four quality presets at three resolutions, providing a clear picture of how this hardware stack behaves under varying loads. This combination ranks 536 out of 1744 tested configurations for the game, placing it firmly in the upper third of all measured systems.

Resolution Scaling

The frame rate progression from 1080p to 4K reveals a predictable decline that accelerates at higher settings. At Low settings, the drop from 165.4 FPS at 1920x1080 to 156.1 FPS at 3840x2160 represents an approximate 5.6% reduction, indicating that the CPU is the limiting factor at this preset. Moving to Medium settings, the same resolution jump reduces performance from 128.5 FPS to 102.7 FPS, a roughly 20% loss that signals the GPU beginning to assert its influence. At High settings, the decline from 124.8 FPS to 94.3 FPS amounts to about 24%, while Ultra settings show the steepest drop from 103.4 FPS to 79.9 FPS, a 22.7% reduction. The pattern is clear: at Low settings, the RX 9070 XT has ample headroom and the Intel Core i5-10400F's six cores become the constraint. As settings increase, the GPU workload grows, and the 4K Ultra result of 79.9 FPS demonstrates that even this high-end graphics card is pushed hard at maximum quality. The 1440p results sit comfortably between the extremes, with all settings maintaining frame rates above 90 FPS, making this resolution the sweet spot for balanced visual fidelity and smooth gameplay.

CPU Role

The Intel Core i5-10400F operates with 6 cores and 12 threads, a configuration that has become a baseline for modern gaming. Its base clock of 2.90 GHz and boost clock of 4.30 GHz provide sufficient single-thread performance for Overpower's action-oriented gameplay. Benchmark data shows a 3DMark single-thread score of 688 and a multi-thread score of 4735, indicating that the processor handles lightly-threaded workloads with reasonable efficiency. The Cinebench R23 results of 1453 single-core and 10297 multi-core reinforce this assessment. In the context of Overpower, the CPU's role is most evident at 1080p Low settings, where the frame rate of 165.4 FPS is only marginally higher than the 4K Low result of 156.1 FPS. This narrow gap of 9.3 FPS suggests that the processor is delivering near its maximum frame throughput even at lower resolutions. The PassMark single-thread score of 2541 places this CPU in the 73rd percentile against all processors, with nearest rivals including the AMD Ryzen 3 7320C at 14277 average score and the Intel Core i5-8500 at 14332. The 12 MB of shared L3 cache and dual-channel DDR4 memory support at 42.7 GB/s bandwidth provide adequate data throughput for a game of this type. At higher resolutions, the CPU's influence diminishes as the GPU takes over the performance ceiling.

GPU Role

The AMD Radeon RX 9070 XT is the dominant component in this pairing, equipped with 16 GB of GDDR6 memory on a 256-bit bus delivering 644.6 GB/s bandwidth. The GPU's 4096 shading units, 256 texture mapping units, and 128 raster operations processors provide substantial compute capacity, reflected in its 48.66 TFLOPS FP32 performance. Clock speeds reach 2970 MHz boost and 2400 MHz game clock, with the memory operating at 2518 MHz effective 20.1 Gbps. The 3DMark Steel Nomad DX12 score of 7260 and PassMark G3D score of 26795 demonstrate strong DirectX 12 performance. The GPU's percentile ranking of 82 against all graphics cards places it well above average, though its nearest rivals in the database include the AMD Radeon Pro 575 and NVIDIA RTX A500 Mobile, which are workstation-class products with different optimization priorities. In Overpower, the GPU's VRAM capacity of 16 GB ensures that even at 4K Ultra settings, texture data and geometry buffers remain comfortably within memory limits. The scaling from 1080p Ultra at 103.4 FPS to 4K Ultra at 79.9 FPS shows a 22.7% performance cost for the resolution increase, which is a modest penalty given the four-fold increase in pixel count. The RX 9070 XT's 4 nm manufacturing process and 53,900 million transistors on a 357 mm² die contribute to its efficiency at maintaining high frame rates across all tested configurations.

Settings Recommendations

The measured data provides clear guidance for optimizing the Overpower experience. At 1920x1080, the Ultra preset delivers 103.4 FPS, which is well above the threshold for smooth action gameplay, while the High preset at 124.8 FPS offers additional headroom for competitive play. The Medium preset at 128.5 FPS provides nearly identical performance to High, suggesting that the visual quality difference between these two settings is minimal in practice. For 2560x1440, the Ultra preset maintains 90.3 FPS, which remains playable, but the High preset at 109 FPS offers a more comfortable margin for demanding scenes. The Medium setting at 114.9 FPS is also viable. At 3840x2160, the Low preset achieves 156.1 FPS, but this sacrifices significant visual quality. The High preset at 94.3 FPS represents the best balance for 4K, providing near-100 FPS performance while retaining most visual features. The Ultra preset at 79.9 FPS is still smooth for most players, but the 14.4 FPS gain from dropping to High is substantial. The data indicates that High settings at any resolution offer the most consistent experience, with frame rates ranging from 94.3 FPS at 4K to 124.8 FPS at 1080p.

FAQ

Q: What is the best resolution for this CPU/GPU combination in Overpower?

A: The 2560x1440 resolution with High settings provides 109 FPS, which balances visual quality and performance. However, 1920x1080 at Ultra settings achieves 103.4 FPS, making either resolution viable depending on display capabilities.

Q: How much performance is lost when moving from 1080p to 4K at Ultra settings?

A: The frame rate drops from 103.4 FPS at 1920x1080 to 79.9 FPS at 3840x2160, representing a 22.7% reduction in average FPS.

Q: Does the CPU bottleneck the GPU at any resolution?

A: At Low settings, the difference between 1080p and 4K is only 9.3 FPS (165.4 vs 156.1), indicating the Intel Core i5-10400F limits performance regardless of resolution. At higher settings, the GPU becomes the limiting factor.

Q: Is 16 GB of VRAM sufficient for Overpower at 4K?

A: The RX 9070 XT's 16 GB GDDR6 memory with 644.6 GB/s bandwidth maintains 79.9 FPS at 4K Ultra, indicating no VRAM capacity issues affect performance.

Q: How does this system rank among all tested configurations?

A: This combination ranks 536 out of 1744 tested combos for Overpower, placing it in the top 30.7% of all systems measured.

Q: What is the minimum FPS at any tested setting?

A: The lowest average frame rate across all measured configurations is 79.9 FPS at 3840x2160 with Ultra settings, which remains above standard 60 FPS thresholds.

Measured FPS Breakdown

At 1920x1080, the Low preset achieves 165.4 FPS, Medium reaches 128.5 FPS, High delivers 124.8 FPS, and Ultra produces 103.4 FPS. The progression shows a 36.9 FPS difference between Low and Medium, followed by a modest 3.7 FPS gap between Medium and High, and a 21.4 FPS drop when moving to Ultra.

At 2560x1440, the Low preset records 161.3 FPS, Medium achieves 114.9 FPS, High delivers 109 FPS, and Ultra produces 90.3 FPS. The scaling from Low to Medium costs 46.4 FPS, while High to Ultra loses 18.7 FPS, demonstrating diminishing returns at higher quality settings.

At 3840x2160, the Low preset reaches 156.1 FPS, Medium achieves 102.7 FPS, High delivers 94.3 FPS, and Ultra produces 79.9 FPS. The total range from lowest to highest setting spans 76.2 FPS, with the most significant drop occurring between Low and Medium at 53.4 FPS.

The data shows a consistent pattern where the gap between Low and Medium settings is the largest across all resolutions, while the difference between Medium and High is relatively small. This suggests that the Medium preset captures most of the visual improvement over Low, while High adds minimal performance cost. The Ultra preset consistently costs 20-25% performance over High, making it the most demanding setting in terms of frame rate impact.