Overpower

The AMD Ryzen 9 9950X3D paired with the NVIDIA GeForce RTX 2070 SUPER delivers a playable experience across most settings in Overpower, but the data reveals a clear delineation between the CPU's immense headroom and the GPU's mid-range ceiling. This combination ranks 1068th out of 1744 tested combos, placing it in the lower half of the database. The measured frames per second show that while the processor is among the top percentile of all CPUs, the graphics card’s 8 GB memory and Turing architecture are the primary arbiters of performance, particularly at higher resolutions.

FAQ

*Q: What is the best resolution to play Overpower with this combo?*

A: At 1920x1080, the combo achieves 143.8 FPS on Low settings, which is the highest average frame rate recorded. At 2560x1440, the same settings yield 127.8 FPS, and at 3840x2160, it drops to 109.1 FPS, indicating that 1080p provides the most fluid experience.

Q: How does the Ultra preset perform compared to High across resolutions?

A: The Ultra preset consistently delivers the lowest frame rates at every resolution. At 3840x2160, Ultra averages 51.8 FPS, which is 8.6 FPS lower than High’s 60.4 FPS. The gap narrows at 1080p, where Ultra runs at 66.6 FPS versus High’s 82.2 FPS.

Q: Is the RTX 2070 SUPER a bottleneck for the Ryzen 9 9950X3D in this game?

A: Yes, the benchmark results suggest a GPU bottleneck. The CPU holds a 96th percentile rank among all CPUs, while the GPU sits at the 65th percentile. The frame rates scale inversely with resolution, a pattern typical of a graphics-limited workload, as the CPU has ample headroom.

Q: What is the total amount of VRAM available, and does it affect performance?

A: The GPU has 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth. While the data does not show VRAM usage, the 8 GB capacity is a limiting factor at 4K, where the average frame rate drops to 51.8 FPS on Ultra settings.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 1068th out of 1744 total combinations. This places it in the lower third of the database, despite the high-end CPU, primarily due to the GPU’s older architecture and lower performance percentile.

Q: Which settings preset offers the largest performance jump from Low to Medium?

A: At 1920x1080, moving from Low (143.8 FPS) to Medium (87.7 FPS) results in a drop of 56.1 FPS. The jump from Medium to High is smaller, a reduction of 5.5 FPS, while High to Ultra costs another 15.6 FPS.

GPU Role

The NVIDIA GeForce RTX 2070 SUPER is the constraining component in this pairing. Its benchmark scores, including a PassMark G3D score of 18169 and a 3DMark Steel Nomad DX12 score of 1651, place it at the 65th percentile of all GPUs. The card’s nearest rivals, such as the NVIDIA RTX A400 (avgScore 22307, deltaPct -0.5) and the AMD Radeon RX 5700 (avgScore 21670, deltaPct 2.5), sit within a narrow performance band, confirming that this GPU is a mid-range part by current standards.

The memory subsystem is critical for Overpower’s resolution scaling. With 8 GB of GDDR6 on a 256-bit bus, the GPU delivers 448.0 GB/s of bandwidth. This configuration yields a measurable difference between settings: at 3840x2160, the average frame rate falls from 109.1 FPS on Low to 70.2 FPS on Medium, and further to 60.4 FPS on High. The Ultra preset, at 51.8 FPS, shows the card struggling to maintain fluid motion at 4K. The same pattern holds at lower resolutions, but with higher absolute values: 2560x1440 sees a peak of 127.8 FPS on Low and a floor of 59.3 FPS on Ultra, while 1920x1080 ranges from 143.8 FPS down to 66.6 FPS.

The clock speeds, a base of 1605 MHz and a boost of 1770 MHz, are modest by modern standards. The FP32 performance of 9.062 TFLOPS and texture rate of 283.2 GTexel/s indicate a card that can handle 1080p gaming well but begins to show its age at higher pixel counts. The GPU’s DirectX 12 Ultimate support (12_2) is present, but the PassMark DirectX 12 score of 67 suggests that the hardware does not excel in modern API workloads. This is reflected in the measured data: the delta between Low and Ultra at 1080p is 77.2 FPS, yet the relative drop of 53.7% shows that the GPU is the primary driver of performance scaling.

CPU Role

The AMD Ryzen 9 9950X3D provides an overwhelming amount of computational headroom for Overpower. With 16 cores and 32 threads based on the Zen 5 architecture (Granite Ridge), this CPU scores 59712 in Cinebench R23 multicore and 8430 in single-core tests. Its average benchmark score of 71660 places it at the 96th percentile of all CPUs, with nearest rivals like the Intel Xeon Platinum 8270 (avgScore 71056, deltaPct 0.9) and AMD Ryzen 9 9950X (avgScore 70420, deltaPct 1.8) trailing slightly. The Intel Xeon 6517P is ahead by 1.9%, but this is within a negligible margin.

The CPU’s cache hierarchy is substantial: 128 MB of shared L3 cache, 1 MB L2 per core, and 80 KB L1 per core. This large cache, combined with a boost clock of 5.70 GHz, ensures that the processor is never the limiting factor in the measured frame rates. The data shows that frame rates are almost entirely dependent on the GPU’s settings preset and resolution, not CPU thread utilization. For instance, at 3840x2160 Low, the combo hits 109.1 FPS, which is 57.3 FPS higher than the 4K Ultra result, a variance that cannot be attributed to CPU performance.

The 9950X3D’s memory bandwidth of 89.6 GB/s for DDR5 dual-channel memory, along with PCIe Gen 5 support with 24 lanes, provides a fast data path for the GPU. However, the RTX 2070 SUPER uses PCIe 3.0 x16, which is backward compatible but does not leverage the newer standard’s bandwidth. The CPU’s single-thread performance, evidenced by a PassMark single-thread score of 4737 and a Geekbench single-core score of 3401, is more than adequate for game logic, but the benchmark results show that Overpower scales with GPU load rather than CPU capability. In practice, the CPU’s 170 W TDP and 4 nm process node allow it to sustain high clocks without thermal throttling, though this is not directly measured in the game FPS data.

Settings Recommendations

The measured FPS data suggests that the High preset offers the best balance of visual fidelity and playability for this combo. At 1920x1080, High delivers 82.2 FPS, which is 5.5 FPS lower than Medium (87.7 FPS) but 15.6 FPS higher than Ultra (66.6 FPS). The jump from Medium to High is minimal in cost, making it a sensible choice for a smooth experience.

At 2560x1440, High produces 73.6 FPS, which is still comfortably above the 60 FPS threshold, while Ultra drops to 59.3 FPS. For 4K gaming, High yields 60.4 FPS, a marginal 0.4 FPS above the 60 FPS target, but the Ultra preset at 51.8 FPS is likely too choppy for action gameplay. The Low preset, while achieving 143.8 FPS at 1080p, sacrifices too much visual quality, and the Medium preset at 87.7 FPS does not offer a significant enough improvement over High to justify the lower settings.

The data indicates that High is the optimal preset across all three resolutions, as it maintains an average frame rate above 60 FPS in every case. For users with a 60 Hz display, 4K High is viable, but 1440p High (73.6 FPS) provides more headroom for frame time spikes. At 1080p, the 82.2 FPS on High is adequate for most monitors, though competitive players might prefer the Low preset’s 143.8 FPS for maximum responsiveness.

How This Combo Ranks

This specific configuration ranks 1068th out of 1744 tested combos, placing it in the 38th percentile of all pairings. The rank reflects the significant imbalance between the CPU and GPU: the processor is in the top 4% of all CPUs, while the graphics card is in the bottom 35% of GPUs. This mismatch means that the combo’s overall standing is dragged down by the GPU, despite the CPU’s elite status.

Compared to other combos in the database, this pairing sits below the median, which is expected given the RTX 2070 SUPER’s age and end-of-life production status. The GPU’s nearest rivals, such as the NVIDIA GeForce GTX TITAN Z (avgScore 22006, deltaPct 0.9) and the NVIDIA GeForce RTX 4060 Mobile (avgScore 22729, deltaPct -2.3), show that the desktop 2070 SUPER is competitive with older high-end parts but lags behind newer mobile offerings. The CPU’s rivals, including the Intel Core i7-14700KF (avgScore 70104, deltaPct 2.2), are all within a 2% performance delta, highlighting that the CPU is not the source of the combo’s lower rank.

The rank of 1068 out of 1744 is consistent with the measured FPS data, which shows playable but not exceptional performance. For a game like Overpower, this combo is capable of delivering a solid 60 FPS experience at 1080p High, but it cannot push high refresh rates at 1440p or 4K. The data suggests that users seeking better performance would need to upgrade the GPU, as the CPU has substantial headroom to support a more powerful graphics card without becoming a bottleneck.