Overpower
This combination provides smooth gameplay with an average of 63 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 45 | 50 | 82 |
| 1440p QHD | 47 | 57 | 57 | 92 |
| 1080p Full HD | 54 | 64 | 66 | 109 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 9 9950X3D + NVIDIA GeForce GTX 1070, In-Depth Analysis
The AMD Ryzen 9 9950X3D and NVIDIA GeForce GTX 1070 combination presents a stark study in component imbalance within the game Overpower. The data indicates a system where the CPU’s immense processing capability is consistently constrained by the GPU’s older architecture, resulting in frame rates that are heavily dependent on graphical settings and resolution. This analysis breaks down the measured performance to clarify the role each component plays.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 9 9950X3D is a 16-core, 32-thread processor based on the Zen 5 architecture, codenamed Granite Ridge. It operates on a base clock of 4.30 GHz and can boost up to 5.70 GHz, with a 170 W TDP. The CPU has a substantial 128 MB of shared L3 cache, which is often beneficial for gaming workloads. Its benchmark scores are exceptional, with a Cinebench R23 multicore score of 59712 and a single-core score of 8430. In synthetic tests, it achieves a Passmark multithread score of 70255 and a Geekbench single-core score of 3401.
In the context of Overpower, the CPU’s role is to feed the GPU with draw calls and game logic. The benchmark results show that the CPU is not the limiting factor in this pairing. At 1080p Low settings, the system achieves 109 FPS, which is the highest average FPS recorded across all settings and resolutions. This suggests that the CPU has ample headroom to process frames quickly. The processor’s high single-thread performance, as evidenced by its Cinebench R23 single-core score of 8430, is notably strong. However, the performance ceiling is ultimately dictated by the graphics card, not the processor. The CPU’s percentile rank of 96 against all CPUs indicates it is a top-tier part, but this does not translate to proportional gains in Overpower when paired with a much older GPU. The data shows a clear pattern: the CPU is ready to deliver far more frames than the GPU can render, making the GPU the primary bottleneck across nearly all test scenarios.
How This Combo Ranks — use comboRankInGame vs other tested combos
Within the database of tested combinations for Overpower, this specific pairing of the Ryzen 9 9950X3D and GTX 1070 holds a rank of 1457 out of 1744 total combos. This places it in the lower percentile of tested systems, indicating that while it is functional, it is not a high-performance configuration for this specific title. The rank reflects the overall average performance across all tested settings and resolutions, which is heavily dragged down by the GPU’s limitations.
The CPU’s nearest rivals, based on average benchmark scores, include the Intel Xeon Platinum 8270 (deltaPct 0.9), the AMD Ryzen 9 9950X (deltaPct 1.8), and the Intel Core i7-14700KF (deltaPct 2.2). These scores show that the 9950X3D is marginally faster than these processors in general compute tasks. However, this lead does not manifest in Overpower because the GPU becomes the bottleneck. The combo rank of 1457 is not a reflection of the CPU’s capability but rather a measure of the entire system’s performance. The data suggests that swapping the CPU for a lower-tier model would likely yield almost identical frame rates in this game, as the GTX 1070 would remain the limiting factor. This ranking highlights a wasted potential; the CPU’s high percentile rank is irrelevant when the GPU is positioned at the 51st percentile.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The frame rate data across resolutions provides a clear picture of the system’s bottleneck. At Low settings, the average FPS drops from 109 at 1920x1080 to 92.3 at 2560x1440, and further to 81.6 at 3840x2160. This is a decrease of 15.3% going from 1080p to 1440p, and another 11.6% from 1440p to 4K. The decline is relatively modest, suggesting that even at 4K Low, the GPU is still able to maintain a playable frame rate, but the scaling is not linear.
For higher settings, the scaling is more dramatic. At High settings, the FPS drops from 64.4 at 1080p to 57 at 1440p, and finally to 44.7 at 4K. This represents a 29.7% drop from 1080p to 4K. At Ultra settings, the drop is even steeper: from 53.8 at 1080p to 46.7 at 1440p, and then to 39.6 at 4K, a 26.4% decrease from 1080p to 4K. The pattern indicates that as resolution increases, the GPU’s rendering workload grows, and the frame rate drops accordingly. This behavior is characteristic of a GPU-bound scenario. If the CPU were the bottleneck, we would expect to see minimal frame rate changes across resolutions, as the CPU’s workload remains constant. The data shows a consistent frame rate drop with each resolution increase, which confirms that the GTX 1070 is the limiting component. The CPU is not holding the system back; instead, the GPU’s fill rate and memory bandwidth are being saturated at higher resolutions.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data for Overpower reveals a performance landscape defined by the GPU’s capabilities. At 1920x1080, the system achieves an average of 109 FPS on Low settings. This drops to 65.7 FPS on Medium, 64.4 FPS on High, and 53.8 FPS on Ultra. The difference between Medium and High is minimal, only 1.3 FPS, which suggests that these two settings impose a similar load on the GPU. The jump from Low to Medium is significant, a 39.7% performance hit, indicating a large increase in graphical complexity.
At 2560x1440, the average FPS on Low is 92.3. This drops to 56.9 FPS on Medium and 57 FPS on High, showing a near-identical performance between these two settings. Ultra settings produce an average of 46.7 FPS. The performance gap between Low and the rest is substantial, as the GPU is forced to render more fragments. At 3840x2160, the system manages 81.6 FPS on Low, which is still playable. However, Medium and High settings yield 49.9 FPS and 44.7 FPS respectively, while Ultra drops to 39.6 FPS. The data shows that at 4K, only Low settings provide a frame rate above 60 FPS. Across all resolutions, the pattern is consistent: Low settings provide the highest frame rates, and Ultra settings the lowest. The system’s performance is clearly tied to the GPU’s fill rate, and the CPU’s high core count and clock speeds do not compensate for the GPU’s age.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce GTX 1070 is an end-of-life product based on the Pascal architecture, using the GP104 chip on a 16 nm process. It has 8 GB of GDDR5 memory on a 256-bit bus, providing a bandwidth of 256.3 GB/s. The GPU’s base clock is 1506 MHz with a boost clock of 1683 MHz, and it has a TDP of 150 W. Its compute capabilities include 1920 shading units and a FP32 performance of 6.463 TFLOPS. In synthetic benchmarks, it scores 13498 in Passmark G3D and 47490 in Geekbench OpenCL. Its percentile rank against all GPUs is 51, placing it in the middle of the pack.
In Overpower, the GTX 1070 is the definitive performance limiter. The 8 GB of VRAM is sufficient for the textures used at 1080p and 1440p, but the GPU’s raw compute power is insufficient to maintain high frame rates at higher settings. The benchmark results show that the GPU’s performance is the primary driver of the FPS numbers. For example, at 1080p Ultra, the system only achieves 53.8 FPS, which is a direct consequence of the GPU’s limited shader throughput and texture rate of 202.0 GTexel/s. The GPU’s nearest rivals, such as the NVIDIA GeForce GTX 1650 SUPER (deltaPct -1.4) and the NVIDIA GeForce GTX 880M (deltaPct -1.3), have similar average scores, but none of them are capable of delivering high refresh rate gaming in this title. The data indicates that the GTX 1070’s performance is consistent with its age and market position. It is not a card designed for high-end 4K gaming, and the frame rates measured at 3840x2160 confirm this, with even Low settings producing only 81.6 FPS. The GPU’s memory clock of 2002 MHz and bandwidth are adequate for 1080p, but they become a limiting factor at higher resolutions where the demand for memory bandwidth increases.
Hardware Specifications
AMD Ryzen 9 9950X3D
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9950X3D + NVIDIA GeForce GTX 1070 in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 81.6 |
| 3840x2160 | Medium | 49.9 |
| 3840x2160 | High | 44.7 |
| 3840x2160 | Ultra | 39.6 |
| 2560x1440 | Low | 92.3 |
| 2560x1440 | High | 57.0 |
| 2560x1440 | Medium | 56.9 |
| 2560x1440 | Ultra | 46.7 |
| 1920x1080 | Low | 109.0 |
| 1920x1080 | Medium | 65.7 |
| 1920x1080 | High | 64.4 |
| 1920x1080 | Ultra | 53.8 |
Overpower with GTX 1070 + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 9 9950X3D + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.