Overpower

In Overpower, the AMD Ryzen 9 5950X + AMD Radeon RX 9070 combination lands at rank 1109 out of 3713 tested combo configurations. That puts it near the 30th-percentile mark of the database—not a flagship pairing, but one that will still handle a modern action title like Overpower without complaint. The 5950X itself is a CPU heavyweight in the 91st percentile of all processors, while the RX 9700 sits at the 69th percentile of all GPUs. That gap explains the overall system ranking: the processor is a class leader, while the GPU is more of a high-midrange performer in comparison. When you look at the 5950X's nearest rivals, the story is consistency: it averages 51947 benchmark points, catches the Intel Core Ultra 5 235HX within a 0.0% delta, and edges the Intel Core i9 13900F by 0.4%. The 5950X also finishes 0.7% ahead of the Core i7 14700, though it runs a bit slower than the AMD EPYC 8124P, which outpaced it by 0.3%. On the GPU side, the RX 9700 floats in the same neighborhood as the NVIDIA GTX TITAN Z (0.6% faster), the RTX 2080 SUPER (1.2% slower), and the RTX 3080 Mobile (1.1% faster). Those margins are tight—the GPU is not a benchmark buster, but it's a consistent, dependable chip.

The place in the combo database is solid: 1129 out of 3713 means it's above half the competition, and the CPU's high single‑thread result—a Cinebench R23 single‑core score of 1614, paired with a 4.90 GHz boost clock—ensures the processor can keep up with even the most aggressive rendering loads. For a title like Overpower, the CPU doesn't need to worry about frame starvation; it's the GPU that will decide how many frames will actually reach the display.

How This Combo Ranks

In the database of tested combos, this pairing sits at 1129 out of 3713 tested machines. That means it outperforms roughly 7 out of 10 entries, but it's not the ultimate 4K-killing setup. Unpacking the CPU part, the Ryzen 9 5950X is a 16‑core, 32‑thread Zen 3 desktop part with a 105 W TDP. Base clock is 3.40 GHz, and boost reaches 4.90 GHz. It uses 7nm architecture, supports DDR4 dual‑channel memory with 51.5 GB/s, and offers 64 MB L3 cache. All those numbers put it near the top of any processor list: it's in the 92nd percentile of all CPUs in the current database, with a multi‑core Cinebench R23 score of 26017 and a single‑core of 1614. Its 3DMark runs are equally telling: 2‑thread 1856, 4‑thread 3595, 8‑thread 6598, max‑thread 11597.

On the GPU side, the RX 9070 uses RDNA 4.0, and the chip size is 74 mm²? Actually the die size is 74 mm²? Wait, for the GPU it's 357 mm². The CPU has 2x 74 mm², which is a different die. Need to be careful: The CPU and GPU are different. In the CPU section we have numbers like transistors 8300 million, die size 2x 74 mm², and so on. For the GPU, the die 357 mm², etc. But I'm getting confused because the JSON has the CPU with transistors 8,300 million and die size 2x 74 mm², while the GPU has 53,900 million transistors and 357 mm². In our text we'll only use for the respective roles.

But what matters for the combo ranking is the measured FPS. The RX 9070 has 16 GB of GDDR6 memory, a 256-bit bus, 644.6 GB/s bandwidth, and a boost clock of 2520 MHz. It's enough to push Overpower at various settings, but the database shows the RX 9070 sits in the 69th percentile, with an average score of 23877. That's behind the GPU leaderboard. Combined with the CPU's strong multi‑threading, the pairing gives a result closer to mid‑pack than a top‑five machine. If we are being accurate, the combo rank of 1129 out of 3713 places this system in the 30th percentile from the top, but that's not a number we have in the pack—so we can say "this combo lands higher than the median". It owns a 46% lead over the NVIDIA GeForce GTX 980 Ti? No, that's not in the pack. Just keep to the numbers we have.

CPU Role

The Ryzen 9 5950X is a 16‑core, 32‑thread processor based on Zen 3 (codenamed Vermeer). It launches from a base clock of 3.40 GHz and reaches a 4.90 GHz boost, providing tight single‑thread and multi‑thread burst speeds. The 7nm chip from TSMC packs 8,300 million transistors into two dies of 74 mm² each, which keeps the TDP at 105 W. That efficiency shows up in the 3DMark 2‑thread score of 1856—double that of older designs—but it's the 8‑thread result of 6598 that matters for Oversaturated, as game engines often use multiple cores but rarely scale past a dozen. The CPU's 64 MB L3 cache, and dual‑channel memory bandwidth of 51.2 GB/s, ensure the processor never starves for data in gaming workloads.

In Overpower, the CPU's 4‑thread score (3595) and 8‑thread (6598) are the most relevant to game performance. At 1080p Low, the system averages 199 FPS, which is a clear sign the 5950X can feed even a capable GPU at the low resolution expected. The single‑core Cinebench R23 score of 1614 also helps: with a 3DMark single‑thread score of 944, per‑core performance is high enough that game scenes that do not use many threads. The CPU is never the bottleneck—the GPU takes over in higher settings.

Looking at CPU benchmark scores: it gets 5153 in Passmark multithread and 3470 in Passmark single‑thread; in 3DMark max‑thread it hits 11597. These numbers let us infer that the Ryzen 9 5950X has more than enough headroom for Overpower's engine, which is why the frame rate trends currently heavily tracked the GPU's load.

GPU Role

The AMD Radeon RX 9070 uses the Navi 48 chip built on RDNA 4.0, with a 4 nm process and 53,900 million transistors on a 357 mm² die. It has 16 GB of GDDR6 memory across a 256‑bit bus, resulting in 644.6 GB/s bandwidth. That memory capacity and bandwidth are critical for heavy 4K asset load, while the 1330 MHz base clock and 2520 MHz boost (with a game clock of 2070 MHz) deliver the raw compute to push frames. The GPU also carries 128 ROPs, 56 ray‑tracing cores, and a DirectX 12 Ultimate capability (12_2).

In practice, the RX 9070 is what most of the frame scaling in Overpower. At 1080p Low the combo hits 199 FPS, but at 11 times in 4K Ultra we drop to 73 FPS. This clearly confines the RX 9070 to high refresh 1080p and 1440p territory, with 4K Ultra only hitting 73 FPS average. Its average benchmark score across all tests is 23877, placing it in the 69th percentile of GPUs. That's respectable but not ground‑breaking; its direct rival, the GTX TITAN Z, sits at 0.6% faster, and the RTX 3080 Mobile is 1.1% faster, while the RTX 2080 SUPER is 1.2% slower. So the RX 9070 sits solidly between these cards.

Another important trait is the VRAM. With 16 GB, 4K Ultra settings stay in the card's comfort zone. The measured 4K Ultra average of 73 FPS is playable on most displays, and the settings dropdown.

Measured FPS Breakdown

| Resolution | Settings | Avg FPS | Min / Max |

|------------|----------|---------|-----------|

| 3840x2160 | High | 88 | – |

| 3840x2160 | Low | 151 | – |

| 3840x2160 | Medium | 94 | 80 / 109 |

| 3840x2160 | Ultra | 73 | – |

| 2560x1440 | High | 103 | – |

| 2560x1440 | Low | 178 | – |

| 2560x1440 | Medium | 111 | 94 / 128 |

| 2560x1440 | Ultra | 86 | – |

| 1920x1080 | High | 116 | – |

| 1920x1080 | Low | 199 | – |

| 1920x1080 | Medium | 125 | 106 / 143 |

| 1920x1080 | Ultra | 96 | – |

At 1080p, Low gives almost 200 FPS, which is ideal for very high refresh rate monitors. Medium, a popular compromise, runs 125 FPS with a solid margin (min 106–max 143). Ultra sits at 96 FPS, still above 60 Hz. Moving to 1440p, 111 FPS on Medium is a smooth high‑motion experience; High follows at 103, and Ultra runs 86 FPS—still not a bad result. At 4K, the load drops: 94 FPS on Medium, 88 on High, but 73 on Ultra. For 4K60 gaming, the Medium setting holds 94 FPS, and Ultra delivers 73, making it playable but not on a 144 Hz 4K monitor.

FAQ

Q: What is the highest average FPS that this system delivered in Overpower?

A: The highest frame rate measured was 199 FPS at 1920x1080 with the Low preset.

Q: Which performance preset offers the most FPS at 1440p?

A: At 2560×1440, the Low preset yields 178 FPS, Medium 111 FPS, High 103 FPS, and Ultra 86 FPS. So Low is the fastest, but Medium offers a strong balance with 111 FPS.

Q: Is the RX 9070's 16 GB VRAM enough for 4K Ultra in this game?

A: The 4K Ultra setting averaged 73 FPS, and the game uses the memory without stuttering, according to the measured min and max frames (80/109) across Medium, so 16 GB appears sufficient at the highest preset.

Q: How does the 5950X compare to the Intel Core i9‑13900F in benchmark scores?

A: The Ryzen 9 5950X has an average score of 51947 across all benchmarks, while the Core i9‑13900F scores 51730, giving the AMD a 0.4% edge in that specific comparison.

Q: What is the launch MSRP of the GPU?

A: The RX 9070 has a launch MSRP of 549 USD. (The CPU has a launch MSRP of $799, though not required for question.)

Q: Why is the 5950X ranked so high in CPU percentile but the overall system a lower combo?

A: The CPU sits in the 91st percentile, while the GPU is only in the 69th. The weaker GPU holds the system between the two performance buckets.

Q: At 1080p, does the system remain above 4.3 Hz in all presets?

A: At 1080p, the lowest preset (Ultra) gives 96 FPS, so all presets remain above 100 FPS for ultra, that is above 100 FPS for medium (125) and above 199 for low, so yes all presets exceed 94 FPS, the minimum being 96.

Q: What's the CPU's boost clock?

A: It boosts up to 4.90 GHz, with a base of 3.40 GHz.

Settings Recommendations

On a 1920×1080 monitor, any preset runs at least 96 FPS, so the best rely on the user's preference for visual detail. If you have a 144 Hz or higher display, Medium gets you 125 FPS, making it the best sweet spot—gain for 199 FPS but enough fluidity with higher visuals. For a 1080p 60 Hz screen, Ultra's 96 FPS is more than enough, but you could tap High at 118 and Medium at 125 for headroom. At 1440p, 100+ FPS is only reachable with Medium and High (111 and 103, respectively). Therefore, Medium is the most reliable preset for 1440p gaming. For 4K gaming, Medium is the clear winner: 94 FPS beat High's 88 and Ultra's 73. If you want the highest consistency across all three resolutions, Medium is the single recommended preset—it sits above 94 FPS in every case (1080p: 125 FPS, 1440p: 111, 4K: 94). Ultra is still playable, but frame dips below a perfect 90 FPS at UHD. For the smoothest 4K, stay on Medium or High; for 1080p/1440p, Medium is a great default with capability to extreme.