Overpower

The AMD Ryzen 9 5900X and NVIDIA GeForce RTX 5070 pairing is a high-end desktop combination built around a 12-core, 24-thread Zen 3 processor and a Blackwell 2.0 graphics card. In Overpower, this combo delivers strong frame rates across all tested resolutions, but the data reveals a clear performance ceiling set by the GPU at higher settings and a CPU-bound scenario at lower settings.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 9 5900X is a 12-core, 24-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates on the AMD Socket AM4 platform with a base clock of 3.70 GHz and a boost clock of 4.80 GHz. The chip has a 105 W TDP and supports DDR4 memory in a dual-channel configuration with 51.2 GB/s of bandwidth. Its cache layout includes 64 KB of L1 per core, 512 KB of L2 per core, and a substantial 64 MB of L3 cache. The processor is built on a 7 nm TSMC process with 8,300 million transistors across two 74 mm² dies.

In synthetic tests, the 5900X shows strong multithreaded performance. Its Cinebench R23 multicore score is 16262, while the single-core score is 1527. Geekbench results are 14118 multicore and 2083 single-core. The PassMark multithread score is 39002, and the single-thread score is 3469. The processor’s 3DMark scores scale with thread count: 1852 for 2 threads, 3588 for 4 threads, 6601 for 8 threads, 9075 for 16 threads, and 10075 for max threads. This scaling pattern indicates the chip handles increasing thread loads efficiently, which matters for games that use multiple cores.

The nearest rivals in the CPU benchmark database are closely matched. The Intel Core Ultra 7 366H scores 41263, which is 0.3% higher than the 5900X’s average benchmark score of 41376. The Intel Core Ultra 7 356H scores 41215 (0.4% higher), and the AMD Ryzen AI 5 PRO 440 scores 41208 (0.4% higher). The Intel Core i7-14650HX scores 41576, which is 0.5% lower than the 5900X. These deltaPct values are all within a tight band, meaning the 5900X sits in a competitive performance tier where small benchmark differences translate to negligible real-world variation.

For Overpower specifically, the CPU’s role is most evident at Low settings. At 1080p Low, the combo produces 226 FPS average, which is the highest frame rate recorded in this dataset. At 1440p Low, it drops to 201 FPS, and at 4K Low, it reaches 171 FPS. The fact that frame rates remain above 170 FPS even at 4K Low suggests the CPU is capable of feeding the GPU with enough data to sustain high output. However, the difference between 1080p and 4K at Low settings — a 55 FPS drop — indicates that the GPU still plays a significant role in determining final output.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo rank for this CPU-GPU pairing in Overpower is 732 out of 3713 tested combinations. This places it in the top 20% of all tested combos, which is a respectable position given the hardware involved. The rank reflects the combined performance of the Ryzen 9 5900X and RTX 5070 specifically for this game, not just their individual benchmark scores.

To contextualize this rank, consider the percentile scores of the individual components. The CPU has a percentile rank of 87 against all CPUs, meaning it outperforms 87% of processors in the database. The GPU has a percentile rank of 82 against all GPUs. Both components are above average, but the combo rank of 732 out of 3713 suggests that the pairing may not achieve the same relative performance as each part does individually. This is common in games where one component bottlenecks the other, and the measured FPS data supports this interpretation.

The nearest GPU rivals provide some insight into where the RTX 5070 sits in the broader landscape. The AMD Radeon Pro 580 has an average score of 40318 (0.1% higher), the AMD Radeon Pro WX 7100 scores 40063 (0.8% higher), and the AMD Radeon Pro 5300 scores 40870 (1.2% lower). The NVIDIA RTX A500 Mobile scores 39568, which is 2% higher than the RTX 5070’s average of 40377. These deltas are small, indicating the RTX 5070 is positioned in a dense cluster of GPUs with similar raw compute performance.

The combo’s rank of 732 suggests that in Overpower, the pairing performs better than most other combinations tested, but it is not at the very top. The data shows that at Ultra settings, the combo drops to 82 FPS at 4K, which is still playable but not exceptionally high. This indicates that the CPU-GPU pairing is well-balanced for this game at high refresh rates, but it does not have the headroom to push Ultra settings at 4K beyond 82 FPS.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data reveals how the combo scales across resolutions. At High settings, the average FPS goes from 131 at 1080p to 117 at 1440p and then to 99 at 4K. The drop from 1080p to 1440p is 14 FPS (10.7%), while the drop from 1440p to 4K is 18 FPS (15.4%). This pattern shows that the GPU becomes more of a limiting factor as resolution increases.

At Medium settings, the scaling is similar but with slightly different magnitudes. The average FPS is 141 at 1080p, 126 at 1440p, and 107 at 4K. The 1080p to 1440p drop is 15 FPS (10.6%), and the 1440p to 4K drop is 19 FPS (15.1%). The consistency of these percentage drops across High and Medium settings suggests that the GPU is the primary bottleneck when moving to higher resolutions, as the CPU workload does not change significantly with resolution.

At Low settings, the scaling is more dramatic. The average FPS is 226 at 1080p, 201 at 1440p, and 171 at 4K. The 1080p to 1440p drop is 25 FPS (11.1%), and the 1440p to 4K drop is 30 FPS (14.9%). While the percentage drops are similar to the higher settings, the absolute frame rates are much higher, indicating that the CPU is capable of delivering more frames if the GPU could keep up.

At Ultra settings, the scaling shows the most significant impact. The average FPS is 109 at 1080p, 97 at 1440p, and 82 at 4K. The 1080p to 1440p drop is 12 FPS (11.0%), and the 1440p to 4K drop is 15 FPS (15.5%). The fact that Ultra settings at 4K produce only 82 FPS, while Low settings at 4K produce 171 FPS, indicates that the GPU is heavily taxed by the increased graphical workload.

The data suggests that at 1080p and 1440p, the CPU has enough headroom to push frame rates higher, but the GPU limits performance as settings increase. At 4K, the GPU is clearly the limiting factor, as evidenced by the relatively small difference between High (99 FPS) and Medium (107 FPS) compared to the larger gap between Low (171 FPS) and Medium (107 FPS).

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the combo produces the following average FPS values: Low 226, Medium 141, High 131, and Ultra 109. The Medium setting has a minimum FPS of 120 and a maximum of 162, which shows a 42 FPS range. This spread suggests some scene-to-scene variability, but the average remains well above the refresh rate of most monitors.

At 2560x1440, the average FPS values are: Low 201, Medium 126, High 117, and Ultra 97. The Medium setting has a minimum of 107 and a maximum of 145, a 38 FPS range. The drop from 1080p to 1440p at each setting is consistent, with the largest absolute drop occurring at Low (25 FPS) and the smallest at Ultra (12 FPS).

At 3840x2160, the average FPS values are: Low 171, Medium 107, High 99, and Ultra 82. The Medium setting has a minimum of 91 and a maximum of 123, a 32 FPS range. This is the only resolution where all settings produce average frame rates below 100 FPS except Low, which remains above 170 FPS.

The complete dataset shows a clear hierarchy: Low settings always produce the highest frame rates, followed by Medium, then High, then Ultra. The gap between Low and Medium is substantial at every resolution. At 1080p, the difference is 85 FPS; at 1440p, it is 75 FPS; at 4K, it is 64 FPS. The gap between Medium and High is much smaller: 10 FPS at 1080p, 9 FPS at 1440p, and 8 FPS at 4K. The gap between High and Ultra is also modest: 22 FPS at 1080p, 20 FPS at 1440p, and 17 FPS at 4K.

These differences indicate that the jump from Low to Medium settings imposes a significant GPU workload increase, while the differences between Medium, High, and Ultra are more incremental. For a player looking to maximize frame rates, Low settings provide a substantial boost, but Medium settings offer a better balance between visual quality and performance.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture with the GB205 chip, manufactured on a 5 nm process at TSMC. It has 31,100 million transistors on a 263 mm² die, giving it a transistor density of 118.3 million per mm². The GPU has a base clock of 2325 MHz and a boost clock of 2512 MHz. Memory runs at 1750 MHz with 28 Gbps effective speed.

The RTX 5070 features 12 GB of GDDR7 memory on a 192-bit bus, providing 672.0 GB/s of bandwidth. It has 6144 shading units, 192 texture mapping units, and 80 raster output pipelines. The GPU includes 48 ray tracing cores and 192 tensor cores. Its pixel rate is 201.0 GPixel/s, and its texture rate is 482.3 GTexel/s. The FP32 performance is 30.87 TFLOPS, with FP16 at the same rate (1:1).

The GPU’s TDP is 250 W, requiring a 600 W suggested PSU and a single 16-pin power connector. It is a dual-slot card measuring 245 mm in length, 115 mm in height, and 40 mm in width. The bus interface is PCIe 5.0 x16, with display outputs including 1x HDMI 2.1b and 3x DisplayPort 2.1b.

In synthetic benchmarks, the RTX 5070 scores 5077 in 3DMark Steel Nomad DX12. Its Geekbench OpenCL score is 172660, and the Vulkan score is 178923. PassMark results include a G3D score of 29137 and a GPU compute score of 15787. The DirectX 10 score is 180, DirectX 11 is 277, DirectX 12 is 108, and DirectX 9 is 320. The G2D score is 1305.

The GPU’s nearest rivals are closely matched in average score. The AMD Radeon Pro 580 scores 40318 (0.1% higher), the AMD Radeon Pro WX 7100 scores 40063 (0.8% higher), and the AMD Radeon Pro 5300 scores 40870 (1.2% lower). The NVIDIA RTX A500 Mobile scores 39568, which is 2% higher than the RTX 5070’s 40377. These small deltas place the RTX 5070 in a competitive performance tier.

In Overpower, the GPU’s role is most evident in the settings scaling. The 12 GB of VRAM is sufficient for the tested settings, as evidenced by the fact that Ultra settings run without dropping below playable frame rates. The memory bandwidth of 672.0 GB/s likely helps sustain performance at 4K, where the GPU is clearly the bottleneck. The 192-bit bus width is narrower than some higher-end cards, but the GDDR7 memory compensates with higher effective speed.

The GPU’s 82nd percentile ranking against all GPUs aligns with its measured performance in this game. At 4K Ultra, the combo produces 82 FPS, which is respectable for a 12 GB card. The fact that the GPU holds above 80 FPS at 4K Ultra suggests that the Blackwell 2.0 architecture handles the game’s rendering demands efficiently, even with a relatively modest memory bus width.

FAQ

Q: What is the best settings preset for this combo in Overpower at 1440p?

A: At 2560x1440, Medium settings produce an average of 126 FPS with a minimum of 107 FPS. High settings yield 117 FPS average, and Ultra produces 97 FPS. If you prioritize frame rate stability, Medium offers the best balance, as the minimum FPS of 107 is still above 100.

Q: How does the combo perform at 4K compared to 1080p?

A: At 3840x2160, the average FPS ranges from 171 at Low settings to 82 at Ultra. At 1920x1080, the range is 226 at Low to 109 at Ultra. The 4K performance is roughly 24-25% lower than 1080p across all settings, indicating the GPU is the limiting factor at higher resolutions.

Q: Is the CPU or GPU more likely to bottleneck this combo in Overpower?

A: The data shows the GPU becomes the bottleneck at higher resolutions. At 4K Low, the average FPS is 171, which is still high, but at 4K Ultra it drops to 82. The CPU’s 12 cores and 24 threads are sufficient to maintain high frame rates at lower settings, but the GPU’s workload increases significantly with resolution and settings.

Q: What is the minimum FPS recorded for this combo?

A: The only setting with a recorded minimum FPS is Medium. At 1080p Medium, the minimum is 120 FPS. At 1440p Medium, it is 107 FPS. At 4K Medium, it is 91 FPS. No minimum values are listed for Low, High, or Ultra settings.

Q: How does the CPU’s benchmark score compare to its nearest rivals?

A: The Ryzen 9 5900X has an average benchmark score of 41376. The Intel Core Ultra 7 366H scores 41263 (0.3% higher), the Intel Core Ultra 7 356H scores 41215 (0.4% higher), and the AMD Ryzen AI 5 PRO 440 scores 41208 (0.4% higher). The Intel Core i7-14650HX scores 41576, which is 0.5% lower.

Q: What is the GPU’s average benchmark score relative to its nearest rivals?

A: The RTX 5070 has an average score of 40377. The AMD Radeon Pro 580 scores 40318 (0.1% higher), the AMD Radeon Pro WX 7100 scores 40063 (0.8% higher), and the AMD Radeon Pro 5300 scores 40870 (1.2% lower). The NVIDIA RTX A500 Mobile scores 39568, which is 2% higher.