Overpower

Overpower is a demanding Action title that stresses both CPU and GPU heavily, and the AMD Ryzen 7 9800X3D + NVIDIA GeForce RTX 4080 SUPER combination delivers a balanced, high-refresh-rate experience across all tested settings. The data shows a system that scales predictably with resolution and settings, with the CPU's strong multi-threaded performance and the GPU's substantial memory bandwidth ensuring that neither component becomes a consistent bottleneck in the tested scenarios.

Resolution Scaling

The measured FPS data for this combo reveals a clear and consistent scaling pattern as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 156 FPS at 1080p to 139 FPS at 1440p, a decline of 17 FPS, and then further down to 118 FPS at 4K. This represents a 24.4% reduction in performance from 1080p to 4K, which is a moderate drop that indicates the GPU is taking on more work at higher resolutions, but the system still maintains very playable frame rates at all levels.

The gap between 1080p and 1440p is relatively small at 17 FPS, suggesting that at 1080p the system is partially limited by other factors, likely the CPU's frame generation capability or game engine overhead. The transition from 1440p to 4K shows a 21 FPS drop, which is more pronounced and points to the GPU becoming the primary limiting component at the highest resolution. This pattern is typical for a high-end pairing where the RTX 4080 SUPER's 16 GB memory and 736.3 GB/s bandwidth are sufficient to feed the GPU at 4K, but the rendering load increases enough to pull average FPS down from the 139-156 range to the 98-127 range depending on settings.

At Ultra settings, the scaling is even more telling. The average FPS drops from 130 at 1080p to 115 at 1440p (an 11.5% reduction), and then to 98 at 4K (a 14.8% reduction from 1440p). This shows that at the highest quality preset, the GPU's compute resources are more heavily utilized at every resolution, and the performance penalty for moving to 4K is significant but not catastrophic. The difference between High and Ultra at 4K is 20 FPS, which indicates that the Ultra preset introduces additional rendering features that cost measurable performance, while the gap between Medium and High at 4K is only 9 FPS, suggesting High is a more efficient step up from Medium.

The Low settings data demonstrates the opposite extreme, where the system is clearly not GPU-limited at any resolution. At 1080p Low, the combo achieves 269 FPS, which drops to 240 FPS at 1440p and 204 FPS at 4K. The 65 FPS difference between 1080p and 4K at Low settings is larger in absolute terms than at High settings, but the percentage drop is similar. This suggests that even at Low settings, the GPU is still the main scaling factor, but the absolute frame rates are so high that the CPU's role becomes more significant at 1080p, where the 269 FPS figure is likely approaching the engine's frame pacing limits.

GPU Role

The NVIDIA GeForce RTX 4080 SUPER is the dominant component in this pairing for Overpower, and its specifications directly explain the measured results. With 16 GB of GDDR6X memory on a 256-bit bus, the GPU provides 736.3 GB/s of bandwidth, which is ample for the textures and geometry at 4K Ultra settings. The 10240 shading units and 80 RT cores are clearly being utilized at higher settings, as the FPS drop from Medium to Ultra at 4K (127 to 98 FPS) demonstrates the additional workload from advanced rendering features.

The GPU's clock speeds—2295 MHz base and 2550 MHz boost—are relatively high, and the benchmark results reflect this. The PassMark G3D score of 34245 places the GPU in the 86th percentile of all GPUs, and its average benchmark score of 54209 is nearly identical to the RTX 4080 (non-SUPER), which scores 54247 with a deltaPct of -0.1%. This means the 4080 SUPER is effectively a match for the standard 4080 in synthetic tests, but the 1.1% lead over the AMD Radeon Pro W5700X and 2.7% lead over the AMD Radeon RX 6750 GRE 12 GB show that it sits comfortably in the upper tier of graphics cards.

In Overpower specifically, the GPU's 16 GB memory capacity is likely a key factor in maintaining the 118 FPS average at 4K High settings. The 736.3 GB/s bandwidth ensures that texture streaming and memory-intensive effects don't cause frame drops, as evidenced by the 4K Medium results showing a minimum FPS of 108 and maximum of 147. The GPU's FP32 performance of 52.22 TFLOPS is substantial, and the measured FPS at 4K Ultra (98 FPS) suggests that the game's most demanding settings are still within the card's capabilities, though not with a huge margin to spare.

The GPU's end-of-life production status is worth noting, as it indicates this is the final iteration of the 40-series architecture. The successor GeForce 50 series will eventually replace it, but for Overpower, the 4080 SUPER's performance is clearly sufficient for high-refresh-rate 4K gaming at most settings, with the 98 FPS at Ultra being the only figure that dips below the 100 FPS threshold.

How This Combo Ranks

This specific combination of the AMD Ryzen 7 9800X3D and NVIDIA GeForce RTX 4080 SUPER ranks 240th out of 3713 tested combos in Overpower, placing it in the top 6.5% of all configurations. This is a strong result that reflects the high-end nature of both components, and the data indicates that the pairing is well-balanced for this game's requirements.

The CPU's contribution to this ranking is significant, as the Ryzen 7 9800X3D sits in the 87th percentile of all CPUs with an average benchmark score of 39768. Its nearest rivals in synthetic tests include the AMD Ryzen 7 PRO 8840HS (39603, deltaPct 0.4%), the AMD Ryzen AI 9 365 (40048, deltaPct -0.7%), and the AMD Ryzen 7 7700 (40081, deltaPct -0.8%). This shows that the 9800X3D is statistically tied with these processors in overall benchmarks, with less than 1% difference in either direction, which means the CPU is not a differentiator in this ranking.

The GPU, however, provides more separation. The RTX 4080 SUPER's 86th percentile ranking and average score of 54209 is competitive with the RTX 4080 (54247, deltaPct -0.1%) and slightly ahead of the AMD Radeon Pro W5700X (54828, deltaPct -1.1%). While these differences are small in synthetic terms, the measured FPS in Overpower shows that the GPU is the primary driver of the combo's 240th rank, as the 4K Ultra average of 98 FPS is a solid result that many lesser GPUs would not achieve.

The fact that this combo ranks in the top 6.5% of all tested configurations suggests that Overpower rewards systems with both strong CPU multi-threading and high GPU memory bandwidth. The CPU's 8 cores and 16 threads, combined with the GPU's 16 GB memory, create a configuration that handles the game's demands without obvious bottlenecks, as evidenced by the relatively smooth scaling across resolutions.

FAQ

Q: What is the best resolution to play Overpower with this combo?

A: The data shows that 2560x1440 at High settings provides a strong balance, with an average FPS of 139 and a 115 FPS average at Ultra. This is a 21.2% improvement over 4K Ultra (98 FPS) and still maintains high visual quality. At 1080p, the system achieves 156 FPS at High, but the gains over 1440p are modest (17 FPS), making 1440p the more efficient choice for visual fidelity.

Q: Can this system handle 4K gaming in Overpower?

A: Yes, the measured FPS at 3840x2160 shows an average of 118 FPS at High settings and 98 FPS at Ultra. This is fully playable, though the Ultra preset does drop below the 100 FPS threshold. At Medium settings, the 4K average is 127 FPS with a minimum of 108 FPS, indicating the system can maintain smooth frame rates even in demanding scenes.

Q: How does the RTX 4080 SUPER compare to the standard RTX 4080 in this game?

A: The synthetic benchmark data shows the RTX 4080 SUPER has an average score of 54209, which is 0.1% lower than the RTX 4080's 54247. This suggests the two cards are essentially identical in overall performance, so players should not expect a significant difference in Overpower between these two GPUs.

Q: Which settings preset provides the best performance increase from Low to Ultra?

A: At 1080p, the jump from Low (269 FPS) to Medium (168 FPS) is a 37.5% drop, while the jump from High (156 FPS) to Ultra (130 FPS) is a 16.7% drop. At 4K, the Low to Medium drop is 37.7% (204 to 127 FPS), and the High to Ultra drop is 16.9% (118 to 98 FPS). This pattern shows that the Medium preset introduces a substantial performance cost over Low, while Ultra is a more moderate step up from High.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: At 1080p Low, the system achieves 269 FPS, which is the highest measured result. This suggests the CPU's 8 cores and 16 threads are sufficient to feed the GPU at this resolution, and the 156 FPS at High indicates the GPU is handling the rendering load. The CPU's benchmark scores (87th percentile) and the GPU's 86th percentile suggest they are well-matched, with no single component causing a major bottleneck at 1080p.

Q: What minimum FPS can be expected at 1440p Medium settings?

A: The measured data shows a minimum FPS of 127 at 2560x1440 Medium settings, with an average of 150 FPS and a maximum of 172 FPS. This 127 FPS minimum indicates that even in the most demanding scenes, the system maintains a high level of performance without significant frame drops.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all settings. Low settings produce an average of 269 FPS, which is the peak performance measured in the entire dataset. Medium settings average 168 FPS with a minimum of 143 FPS and a maximum of 193 FPS, showing a tight frame pacing window. High settings average 156 FPS, and Ultra settings average 130 FPS, which represents a 51.7% reduction from Low to Ultra at this resolution.

Moving to 2560x1440, the performance remains strong but shows the expected reduction. Low settings average 240 FPS, which is a 10.8% drop from the 1080p Low result. Medium settings average 150 FPS with a minimum of 127 FPS and maximum of 172 FPS, which is very close to the 1080p Medium figures. High settings average 139 FPS, and Ultra settings average 115 FPS, with the Ultra preset showing a 11.5% reduction from 1080p Ultra.

At 3840x2160, the system demonstrates its 4K capabilities. Low settings average 204 FPS, maintaining a very high frame rate even at the highest resolution. Medium settings average 127 FPS with a minimum of 108 FPS and maximum of 147 FPS, which is the first setting where the minimum FPS drops below 110. High settings average 118 FPS, and Ultra settings average 98 FPS, which is the only measured average below 100 FPS across the entire dataset.

The data shows a consistent pattern where Medium settings have a slightly larger performance gap from Low than High does from Medium. For example, at 4K, the gap from Low to Medium is 77 FPS, while the gap from Medium to High is only 9 FPS. This suggests that the Medium preset includes significant rendering features that are partially offset by the High preset's optimizations, or that the game's settings scaling is not linear in this range.

CPU Role

The AMD Ryzen 7 9800X3D plays a supporting but crucial role in this combo's Overpower performance. With 8 cores and 16 threads, the CPU provides enough parallelism for the game's multi-threaded workloads, and its 96 MB of shared L3 cache is likely beneficial for the action game's data-heavy scenes. The CPU's base clock of 4.70 GHz and boost clock of 5.20 GHz are high, and the benchmark results show strong single-thread and multi-thread capabilities.

The CPU's Cinebench R23 multicore score of 23230 and single-core score of 2080 place it in a competitive position, and its Geekbench multicore score of 18696 confirms its multi-threading strength. The PassMark multithread score of 40009 and the 3DMark 16-thread score of 10081 indicate that the CPU can handle substantial parallel workloads, which is important for Overpower's physics and AI calculations.

The CPU's nearest rivals in synthetic benchmarks include the AMD Ryzen 7 PRO 8840HS (0.4% higher average score), the AMD Ryzen AI 9 365 (0.7% lower), and the AMD Ryzen 7 7700 (0.8% lower). These small deltas mean that in Overpower, the CPU is unlikely to be the differentiating factor between systems, as the GPU's performance is the dominant variable in the measured FPS data.

The 120 W TDP and 4 nm process node suggest the CPU runs efficiently, and its AMD Socket AM5 compatibility and DDR5 memory support (with 89.6 GB/s bandwidth) ensure that memory bandwidth is not a limiting factor. The CPU's 87th percentile ranking across all CPUs, combined with the GPU's 86th percentile, shows that this combo is well-balanced, and the measured FPS data confirms that the CPU can keep up with the GPU at all tested resolutions and settings, including the 269 FPS result at 1080p Low.