Overpower

Overpower’s measured performance for the AMD Ryzen 7 9700F and AMD Radeon RX 570 combination reveals a system that is heavily constrained by its graphics subsystem, particularly as resolution increases. The data indicates a playable experience primarily at lower settings and resolutions, with a steep performance cliff emerging at 4K. This analysis breaks down the measured FPS across all configurations, contextualizes the combo’s standing, and explains the roles of the CPU and GPU based strictly on the provided benchmark data.

Resolution Scaling

The FPS drop from 1080p to 4K in Overpower is severe, indicating that the AMD Radeon RX 570 is the definitive limiting component. At Low settings, the average frame rate falls from 62 FPS at 1920x1080 to 47 FPS at 3840x2160, a reduction of 15 FPS (24%). This scaling is relatively mild because Low settings reduce the pixel-shading workload, but the 4K result remains below the 60 FPS threshold.

The situation worsens dramatically at higher presets. At Medium settings, the average drops from 39 FPS at 1080p to 29 FPS at 4K, a 10 FPS loss. At High settings, the average falls from 36 FPS at 1080p to 27 FPS at 4K, a 9 FPS loss. At Ultra, the average plunges from 30 FPS at 1080p to just 23 FPS at 4K, an 7 FPS drop that leaves the game essentially unplayable at the highest resolution.

This pattern—where the absolute FPS deficit between 1080p and 4K shrinks as settings increase—is a classic sign of GPU-bound performance. The RX 570’s 4 GB of GDDR5 memory and 224.0 GB/s bandwidth are saturated at 4K, and the 5.095 TFLOPS of FP32 compute cannot keep pace with the increased pixel count. The data shows that going from 1440p to 4K at High settings costs 5 FPS (from 32 to 27), while going from 1080p to 1440p at High costs only 4 FPS (from 36 to 32). This nonlinear scaling suggests that 4K is beyond the card’s effective range for this title.

How This Combo Ranks

The combination of the Ryzen 7 9700F and RX 570 ranks 3556 out of 3713 tested combos in Overpower, placing it in the bottom 4% of all configurations. This low ranking is entirely attributable to the GPU’s age and performance class, as the CPU is a modern, high-end part. The data shows the GPU’s average benchmark score is 28766, with a percentile of 74, yet the combo rank is extremely poor, indicating that the game is highly sensitive to graphics throughput rather than processor capability.

Comparing the GPU to its nearest rivals clarifies the competitive landscape. The RX 570 has an average score of 28766, which is 0.4% lower than the AMD Radeon RX 6800M (28874) and 0.7% higher than the AMD Radeon R9 M295X (28580). It also trails the AMD Radeon RX 470 (28996) by 0.8%. These are all relatively close scores, but none of them are capable of high-refresh-rate gaming in Overpower at 1440p or 4K, based on the measured FPS.

The CPU, by contrast, is a top-tier performer. The Ryzen 7 9700F’s average benchmark score is 69996, with a percentile of 94. It is 0.2% faster than the AMD Ryzen 9 7940HX (69875) and 0.7% faster than the AMD Ryzen 9 7950X (69515). It is 0.2% slower than the Intel Core i7-14700KF (70163) and 0.9% faster than the Intel Core i7-14700K (69355). The massive gulf between the CPU’s high percentile and the combo’s low rank proves that the pairing is unbalanced; the processor is capable of far more than the graphics card can deliver.

GPU Role

The AMD Radeon RX 570 is the primary bottleneck in this configuration. Its specifications—4 GB of GDDR5 memory on a 256-bit bus with 224.0 GB/s bandwidth—are the defining constraints. The card’s base clock is 1168 MHz, boosting to 1244 MHz, with memory running at 1750 MHz (7 Gbps effective). These clock speeds are modest, and the 2048 shading units, 128 TMUs, and 32 ROPs are insufficient for modern action games at high resolutions.

In Overpower, the GPU’s memory capacity appears to be the critical issue. At 4K Ultra, the average FPS is 23, which is barely above a slideshow. The 4 GB frame buffer is likely exhausted, forcing the card to rely on slower memory paths. The measured data supports this: the jump from Medium to High at 4K costs only 2 FPS (29 to 27), while the jump from High to Ultra costs 4 FPS (27 to 23). This suggests that texture and geometry data exceed the VRAM, causing severe performance degradation.

The GPU’s 14 nm process node from GlobalFoundries, with 5,700 million transistors on a 232 mm² die, is dated compared to the CPU’s 4 nm TSMC node. The RX 570’s 150 W TDP and dual-slot design are typical of its era, but the performance per watt is poor by modern standards. The data shows that even at 1080p Low, the card only achieves 62 FPS, which is below the 144 Hz refresh rate many gamers target. The GPU’s percentile of 74 is misleading in this context because Overpower’s specific demands expose its weaknesses.

Measured FPS Breakdown

The complete measured FPS table for this combo is as follows:

1920x1080:

• Low: 62 FPS average
• Medium: 39 FPS average (min 33, max 45)
• High: 36 FPS average
• Ultra: 30 FPS average

2560x1440:

• Low: 55 FPS average
• Medium: 35 FPS average (min 29, max 40)
• High: 32 FPS average
• Ultra: 27 FPS average

3840x2160:

• Low: 47 FPS average
• Medium: 29 FPS average (min 25, max 34)
• High: 27 FPS average
• Ultra: 23 FPS average

At 1080p Low, the combo delivers 62 FPS, which is the only configuration that achieves a smooth, playable frame rate. The Medium preset at 1080p drops to 39 FPS, which is still playable but not ideal for fast-paced action. High and Ultra presets at 1080p yield 36 and 30 FPS, respectively, which are borderline for a genre that benefits from higher responsiveness.

Moving to 1440p, every preset loses ground. Low settings still manage 55 FPS, but Medium falls to 35 FPS, High to 32 FPS, and Ultra to 27 FPS. These numbers suggest that 1440p is only viable at Low settings for a reasonably smooth experience. At 4K, the situation is dire: even Low settings produce only 47 FPS, and Medium, High, and Ultra all fall below 30 FPS. The minimum FPS data points (25 FPS at 4K Medium, 29 FPS at 1440p Medium, 33 FPS at 1080p Medium) indicate significant frame-time spikes that would cause noticeable stuttering.

Settings Recommendations

Based on the measured rows, the optimal experience for this combo is 1080p with the Low preset, which yields 62 FPS average. This is the only configuration that approaches the 60 FPS target, and it provides the headroom needed to avoid dips below playable thresholds. While Low settings reduce visual fidelity, the data shows that the alternative is a sub-30 FPS experience at higher presets.

If visual quality is prioritized over frame rate, 1080p Medium is the maximum acceptable preset, delivering 39 FPS average with a minimum of 33 FPS. This is playable but leaves little margin for demanding scenes. At 1440p, the Low preset (55 FPS) is the only sensible choice; Medium (35 FPS) is marginal, and High/Ultra (32/27 FPS) are too slow for action gameplay. At 4K, no preset is recommended, as even Low (47 FPS) is inconsistent, and Medium (29 FPS) is below the playable threshold.

The data suggests that users should not attempt to run Overpower at Ultra settings with this GPU. The 30 FPS at 1080p Ultra is technically playable, but the 23 FPS at 4K Ultra is not. The CPU’s high performance cannot compensate for the GPU’s limitations, so the settings must be tuned to reduce the graphics load. The 1080p Low preset is the clear winner, providing the best balance of playability and stability according to the measured averages.

CPU Role

The AMD Ryzen 7 9700F plays a minimal role in the measured FPS results, as the GPU is the bottleneck. This 8-core, 16-thread processor based on Zen 5 architecture (Granite Ridge) has a base clock of 3.80 GHz and a boost clock of 5.50 GHz. It features 80 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache, with support for DDR5 memory on a dual-channel bus. Its 65 W TDP and 4 nm process node make it highly efficient, but this efficiency does not translate into higher FPS in Overpower when paired with the RX 570.

The CPU’s benchmark scores are impressive: a multithread score of 36470, a single-thread score of 4691, and a physics score of 2122. Its percentile of 94 indicates it outperforms the vast majority of CPUs. However, the combo rank of 3556 out of 3713 proves that the GPU is the limiting factor. The CPU’s memory bandwidth of 89.6 GB/s is more than adequate for feeding the GPU, and its PCIe Gen 5, 24 lanes provide ample interface bandwidth, but these advantages are moot when the GPU cannot render frames fast enough.

In Overpower, an action game, the CPU handles game logic and physics. The Ryzen 7 9700F’s high single-thread performance (4691 in Passmark) ensures that the game’s main thread is not a bottleneck. The data shows that at 1080p Low, the FPS is 62, which is likely the GPU’s maximum output rather than a CPU limitation. If the CPU were the bottleneck, we would expect to see similar FPS numbers across different resolutions, but the significant drops at 1440p and 4K confirm the GPU is the constraining component.

FAQ

Q: What is the best resolution and settings for playing Overpower with this combo?

A: The measured data shows that 1920x1080 with Low settings provides the highest average FPS at 62, making it the only configuration that achieves a smooth, playable frame rate. All other settings at 1080p or higher resolutions fall below 60 FPS.

Q: Why is the combo rank so low (3556 out of 3713) when the CPU is in the 94th percentile?

A: The low combo rank is due to the AMD Radeon RX 570’s performance limitations in Overpower. The GPU has an average benchmark score of 28766 and a 74th percentile, but the game is highly graphics-intensive. The CPU’s high performance cannot overcome the GPU’s 4 GB VRAM and 5.095 TFLOPS compute, resulting in a poor overall ranking.

Q: Is 4K gaming possible with this setup?

A: No, 4K gaming is not recommended. The highest average FPS at 3840x2160 is 47 with Low settings, but this drops to 29 FPS at Medium and 23 FPS at Ultra. These frame rates are below the playable threshold for action games.

Q: How does the GPU compare to its nearest rivals?

A: The RX 570’s average score of 28766 is 0.4% lower than the AMD Radeon RX 6800M (28874), 0.8% lower than the AMD Radeon RX 470 (28996), and 0.7% higher than the AMD Radeon R9 M295X (28580). These are all closely matched, but none of them provide high FPS in Overpower at 1440p or 4K.

Q: Does the CPU affect FPS in this game?

A: The CPU’s impact is minimal based on the data. The Ryzen 7 9700F has a high single-thread score of 4691 and a multithread score of 36470, which ensures it is not a bottleneck. The FPS drops significantly as resolution increases, indicating the GPU is the limiting component.

Q: What is the maximum FPS achieved with this combo?

A: The maximum average FPS is 62, achieved at 1920x1080 with Low settings. The highest maximum FPS recorded in any configuration is 45 FPS, which occurs at 1080p Medium, suggesting that frame times can spike, but averages are the primary indicator of overall performance.