Overpower

# Overpower with AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 5090 D

The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 5090 D delivers a formidable 4K gaming experience in Overpower, with measured results showing this combination ranks in the 75th percentile of 2,980 tested combos. The data reveals a system that prioritizes raw GPU throughput at high resolutions while maintaining sufficient CPU headroom to keep frame rates consistently above 100 FPS across all tested settings at 4K.

Resolution Scaling

The measured FPS data shows a clear pattern of diminishing returns as resolution increases, with the gap between 1080p and 4K growing more pronounced at lower settings. At Low settings, the system delivers 234 FPS at 1920x1080, dropping to 225 FPS at 2560x1440, and finally 213 FPS at 3840x2160. This represents a 9% reduction from 1080p to 4K at Low settings, indicating that the GPU still has substantial headroom even at the highest resolution.

The scaling behavior shifts dramatically when moving to Medium settings. At 1920x1080, the average FPS is 195, which decreases to 182 FPS at 2560x1440, and further to 155 FPS at 3840x2160. The 1080p to 4K drop at Medium settings is approximately 20.5%, showing that the game's graphical workload becomes more demanding at higher quality presets. The minimum FPS readings at Medium settings — 166 FPS at 1080p, 155 FPS at 1440p, and 132 FPS at 4K — suggest that frame pacing remains consistent even under load.

High settings exhibit a similar scaling pattern to Medium. The 1920x1080 result is 189 FPS, falling to 169 FPS at 2560x1440, and then to 144 FPS at 3840x2160. This represents a 23.8% performance reduction from 1080p to 4K, which is slightly steeper than the Medium preset's 20.5% drop. The increasing gap between resolutions at higher settings indicates that the GPU is becoming progressively more stressed as both resolution and graphical complexity increase.

Ultra settings show the most pronounced resolution scaling. At 1920x1080, the system achieves 157 FPS, dropping to 140 FPS at 2560x1440, and finally 119 FPS at 3840x2160. The 1080p to 4K reduction here is 24.2%, the largest percentage drop among all settings. This pattern suggests that at Ultra quality, the rendering pipeline is heavily GPU-bound, with the RTX 5090 D's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth being exercised more thoroughly.

The data reveals that the limiting component shifts with resolution. At 1080p, the relatively modest FPS gains between Low (234 FPS) and Medium (195 FPS) suggest that the CPU may be providing a ceiling of sorts, given that the Ryzen 7 5800XT's 8 cores and 16 threads are being utilized heavily. At 4K, the larger FPS deltas between settings — from 213 FPS at Low to 119 FPS at Ultra — confirm that the GPU becomes the primary bottleneck as pixel count increases.

CPU Role

The AMD Ryzen 7 5800XT brings 8 cores and 16 threads based on the Zen 3 architecture, codenamed Vermeer, with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. This processor, built on TSMC's 7 nm process with 4,150 million transistors, sits in the 81st percentile of all CPUs benchmarked. Its nearest rivals include the AMD Ryzen 7 7840H with a delta of 0%, the AMD Ryzen 7 8845HS at -0.3%, and the AMD Ryzen 5 9600X at +0.6%, placing it in a competitive mid-range position.

In Overpower, the CPU's role becomes most apparent at lower resolutions where the GPU is less stressed. The single-threaded performance, as measured by the 3DMark single-thread score of 959, contributes to the game's ability to maintain high frame rates at 1080p. The 2-thread score of 1,879 and 4-thread score of 3,603 indicate that the processor handles lightly-threaded workloads efficiently, which is relevant for a game that may not fully utilize all available cores.

The multi-threaded capabilities of the Ryzen 7 5800XT are substantial, with a Cinebench R23 multi-core score of 23,794 and a single-core score of 3,359. PassMark results show a multi-thread score of 28,053 and a single-thread score of 3,535, placing it within the expected performance envelope for a desktop processor of this class. The L3 cache of 32 MB shared across the 8 cores helps maintain data locality, which can benefit game logic and physics calculations.

The 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth may be limiting factors in CPU-intensive scenarios, particularly at 1080p where the system achieves 234 FPS at Low settings. The gap between Low and Medium at 1080p (234 vs. 195 FPS) suggests that the CPU is holding back the GPU to some extent, as the RTX 5090 D is capable of much higher frame rates when unconstrained. However, at 4K, the CPU's influence diminishes, and the GPU's raw compute power takes over as the dominant factor.

Settings Recommendations

Based on the measured data, the Medium preset at 2560x1440 offers the most balanced experience for most users. The 182 FPS average with a minimum of 155 FPS provides smooth gameplay with sufficient headroom for competitive play or high-refresh-rate displays. The 1080p Medium result of 195 FPS (minimum 166 FPS) is also excellent for those prioritizing frame rate above all else.

For 4K gaming, the High preset at 144 FPS average represents the sweet spot. This setting delivers a frame rate that is perfectly suited for 144 Hz displays, and the jump from High to Ultra (119 FPS) costs 25 FPS — a 17.4% reduction — for what may be marginal visual improvements. The Low preset at 4K (213 FPS) is unnecessary for most players, as the visual quality reduction outweighs the performance gain when High already achieves triple-digit frame rates.

Ultra settings are best reserved for players with 120 Hz or lower refresh rate displays at 4K, where the 119 FPS average remains playable. However, the lack of minimum FPS data for Ultra at 4K makes it difficult to assess frame pacing stability, unlike the Medium preset which shows a 132 FPS minimum. At 1440p, Ultra at 140 FPS is viable, but High at 169 FPS provides a more comfortable margin above typical 144 Hz refresh rates.

The data suggests that Low settings at any resolution are unnecessary for this hardware combination. Even at 4K, Low produces 213 FPS, which exceeds the refresh rate capabilities of nearly all current displays. Players seeking maximum frame rates should opt for Medium at 1440p (182 FPS) or High at 1080p (189 FPS), both of which provide excellent responsiveness without sacrificing too much visual fidelity.

How This Combo Ranks

The combination of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 5090 D achieves a rank of 75 out of 2,980 tested combos in Overpower, placing it in the top 2.5% of all configurations. This ranking reflects the GPU's dominant contribution, as the RTX 5090 D sits at the 92nd percentile of all GPUs with an average benchmark score of 77,712, while the CPU is at the 81st percentile.

The GPU's nearest rivals, based on average benchmark scores, include the AMD Radeon RX 6650M XT at +1.1% delta, the AMD Radeon RX 6850M XT at -1.6%, and the NVIDIA Tesla P100 PCIe 12 GB at -2.1%. These deltas are relatively small, indicating that the RTX 5090 D is closely competitive with other high-end GPUs in synthetic benchmarks, yet in Overpower, the measured FPS suggests strong real-world performance.

The CPU's position relative to its rivals — with the Ryzen 7 7840H at 0% delta and the Ryzen 5 9600X at +0.6% — shows that the processor is well-matched with the GPU in this configuration. The 75th rank out of 2,980 combos indicates that while many other CPU-GPU pairings can achieve higher frame rates, this specific combination is solidly above average for the game.

Notably, the combo's rank of 75 seems conservative given the GPU's high percentile ranking. This could be attributed to the CPU's mid-range positioning potentially limiting performance at lower resolutions, where the GPU is not fully utilized. At 4K, the system's performance is likely closer to the top-tier combinations, given that the RTX 5090 D's 104.8 TFLOPS FP32 performance is more fully leveraged.

GPU Role

The NVIDIA GeForce RTX 5090 D is a Blackwell 2.0 architecture GPU built on TSMC's 5 nm process, featuring 92,200 million transistors on a 750 mm² die. Its 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is critical for high-resolution textures and complex scenes in Overpower. The GPU's base clock of 2017 MHz boosts to 2407 MHz, with memory running at 1750 MHz (28 Gbps effective).

The RTX 5090 D's compute capabilities are substantial: 21,760 shading units, 680 texture mapping units, and 176 ROPs, along with 170 ray tracing cores and 680 tensor cores. These specifications translate to a pixel rate of 423.6 GPixel/s and a texture rate of 1,636.8 GTexel/s, with FP32 performance rated at 104.8 TFLOPS. The 575 W TDP and 950 W suggested PSU indicate a power-hungry component, but one that delivers raw performance.

In Overpower, the GPU's role is most evident at 4K resolution, where the frame rates scale predictably with settings. The 119 FPS at Ultra 4K demonstrates that even the most demanding preset remains playable on this hardware. The GPU's 92nd percentile ranking among all GPUs, with an average benchmark score of 77,712, confirms its position as a top-tier performer.

The GPU's nearest rivals in synthetic benchmarks — the AMD Radeon RX 6650M XT at +1.1% and the AMD Radeon RX 6850M XT at -1.6% — show that the RTX 5090 D is competitive but not dominant in raw compute tests. However, in Overpower, the game's optimization for NVIDIA hardware may be contributing to the strong measured FPS, as the data shows particularly high performance at 1080p High (189 FPS) and 4K Low (213 FPS).

The RTX 5090 D's 32 GB VRAM is a significant advantage for Overpower, as it eliminates any concerns about texture memory limitations at 4K Ultra settings. The 1.79 TB/s bandwidth ensures that texture streaming and memory-intensive effects do not become bottlenecks, which is reflected in the consistent FPS across settings at each resolution.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all presets. Low settings produce 234 FPS average, which is the maximum measured in this configuration. Medium settings achieve 195 FPS with a minimum of 166 FPS and a maximum of 224 FPS, showing tight frame pacing. High settings reach 189 FPS, while Ultra settings drop to 157 FPS. The 1080p results demonstrate that the CPU is the limiting factor, as the GPU could theoretically push higher frame rates if the processor allowed.

The 2560x1440 resolution shows a modest performance reduction from 1080p. Low settings average 225 FPS, Medium settings 182 FPS (with a minimum of 155 FPS and maximum of 209 FPS), High settings 169 FPS, and Ultra settings 140 FPS. The scaling from 1080p to 1440p is consistent across settings, ranging from a 3.8% drop at Low to a 12.2% drop at Ultra, indicating that the GPU is beginning to assert its influence.

At 3840x2160, the GPU's dominance becomes fully apparent. Low settings produce 213 FPS, Medium 155 FPS (minimum 132 FPS, maximum 178 FPS), High 144 FPS, and Ultra 119 FPS. The 4K results show the largest deltas between settings — a 44.1% difference between Low and Medium, and a 79% difference between Low and Ultra — highlighting the GPU's workload scaling with graphical complexity.

The minimum FPS data, available only for the Medium preset at each resolution, follows a predictable pattern: 166 FPS at 1080p, 155 FPS at 1440p, and 132 FPS at 4K. These minimums are all above 120 FPS, ensuring that even in demanding scenes, the frame rate does not dip below playable thresholds. The maximum FPS readings at Medium settings — 224 FPS at 1080p, 209 FPS at 1440p, and 178 FPS at 4K — show that the system has headroom for bursts of higher performance.

The complete dataset shows that this combination excels in providing high frame rates across all resolutions and settings, with no configuration falling below 119 FPS average. The RTX 5090 D's 32 GB VRAM, 1.79 TB/s bandwidth, and 104.8 TFLOPS FP32 performance, combined with the Ryzen 7 5800XT's 8 cores and 16 threads, create a balanced platform that is ready for both competitive play at 1080p and immersive 4K gaming. The rank of 75 out of 2,980 combos confirms that while this is not the absolute fastest configuration available, it is firmly in the upper echelon of tested systems for Overpower.