Overpower

The AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce RTX 4080 SUPER delivers a remarkably consistent experience in Overpower, with the data showing that the 4080 SUPER is the dominant performance driver across nearly all settings. The 5800X3D’s 8 cores and 16 threads provide ample headroom, but the measured frame rates scale so predictably with resolution and preset that the GPU’s 16 GB of GDDR6X memory and 52.22 TFLOPS of compute performance are clearly the limiting factors at the highest visual loads.

Resolution Scaling

The FPS drop from 1080p to 4K is steep but expected for a GPU-bound title. At Low settings, the average frame rate falls from 214.4 FPS at 1920x1080 to 195.5 FPS at 3840x2160, a modest 8.8% reduction that suggests the CPU is still feeding the GPU adequately at lower resolutions. Moving to High settings, the 1080p result of 158.6 FPS drops to 140 FPS at 2560x1440, then further to 116.1 FPS at 4K—a cumulative 26.8% loss from 1080p to 4K. The Ultra preset shows the largest absolute drop: 126.8 FPS at 1080p falls to 117.8 FPS at 1440p and finally to 100.9 FPS at 4K, a 20.4% decline from the baseline.

These numbers indicate that the RTX 4080 SUPER’s 736.3 GB/s memory bandwidth and 256-bit bus are being pushed hard at 4K Ultra, where the pixel rate of 285.6 GPixel/s becomes the bottleneck. The 5800X3D’s 96 MB of shared L3 cache helps maintain minimum frame pacing, but the scaling pattern shows that Overpower is not CPU-limited beyond 1080p Low. At 4K Low, the 195.5 FPS average is only 18.9 FPS below the 1080p Low result, confirming that the GPU has massive headroom at lower settings even at high resolutions.

Settings Recommendations

For players targeting a smooth 1440p experience, the data shows that Medium settings at 2560x1440 deliver 148.7 FPS, which is within 10% of the High preset’s 140 FPS but with a 6.2% performance gain. The jump from Medium to High at 1440p costs only 8.7 FPS, making High the better visual choice for those with 144Hz monitors. At 4K, the choice is clearer: High settings at 116.1 FPS is the sweet spot, as Medium only adds 10 FPS (126.1) while Ultra drops to 100.9 FPS—a 13.1% penalty over High with diminishing visual returns.

The 1080p data suggests that Low settings (214.4 FPS) are unnecessary for competitive play, as even Ultra maintains 126.8 FPS, which is above the refresh rate of most standard monitors. The most balanced recommendation is High at 1440p or 4K, as it sits comfortably above 60 FPS at both resolutions while preserving visual fidelity. For esports-focused players, Medium at 1080p (169.8 FPS) offers a 7.1% improvement over High (158.6 FPS) without the visual degradation of Low settings.

CPU Role

The Ryzen 7 5800X3D’s Zen 3 architecture, built on TSMC’s 7 nm process, provides 8 cores and 16 threads with a base clock of 3.40 GHz and a boost clock of 4.50 GHz. Its 96 MB of shared L3 cache is the standout feature, and it directly contributes to the CPU’s 83rd percentile ranking among all processors. In the 3DMark multi-threaded test, the CPU scores 7299 with 16 threads, which is nearly identical to its max-thread score of 7285, indicating that scaling beyond 8 cores yields minimal gains—a pattern consistent with Overpower’s thread utilization.

The CPU’s single-thread performance, measured at 884 in 3DMark and 3397 in Cinebench R23 single-core, is sufficient to avoid bottlenecking the RTX 4080 SUPER at 1080p Low, where the 214.4 FPS result is only 8.8% higher than the 4K Low score. This suggests that even at the lowest resolution and preset, the GPU is still the primary constraint. The 5800X3D’s nearest rivals include the Intel Core i9-11900K (deltaPct of 0.1) and AMD Ryzen 5 7600 (deltaPct of -0.2), showing that its overall benchmark average of 26574 is effectively tied with those parts, but its 3D V-Cache gives it an edge in gaming workloads that rely on large data sets.

In Cinebench R23 multi-core, the 5800X3D scores 24063, which is 4.4% higher than the Ryzen 5 7600’s average score of 26617 would suggest in raw throughput, but the cache advantage is what matters here. The CPU’s PassMark multi-thread score of 28309 and physics score of 2884 indicate strong integer and floating-point performance, yet the measured FPS data shows no significant CPU limitation across any resolution or preset combination.

FAQ

*Q: Does the Ryzen 7 5800X3D bottleneck the RTX 4080 SUPER in Overpower?*

A: No. The FPS scaling from 1080p Low (214.4 FPS) to 4K Low (195.5 FPS) shows only an 8.8% drop, indicating the GPU remains the limiting factor even at the lowest settings where CPU load is highest.

Q: What is the best preset for 4K gaming with this combo?

A: High settings at 3840x2160 produce 116.1 FPS, which is 15.2 FPS higher than Ultra (100.9 FPS) and only 10 FPS lower than Medium (126.1 FPS), making it the optimal balance of visual quality and performance.

Q: How does the 5800X3D compare to its closest rivals in raw CPU benchmarks?

A: Its average benchmark score of 26574 is within 0.1% of the AMD EPYC 8024P (26555) and Intel Core i9-11900K (26546), and it trails the AMD Ryzen 5 7600 (26617) by only 0.2%, showing near-identical overall performance.

Q: Can this system hit 144 FPS at 1440p?

A: Yes, at Medium settings the average is 148.7 FPS, and at Low settings it reaches 208.5 FPS. Even High settings at 140 FPS are close, making 144Hz monitors viable with minor tweaks.

*Q: Is the 16 GB VRAM on the RTX 4080 SUPER sufficient for Overpower at 4K?*

A: The measured data shows no VRAM-related performance collapse at 4K Ultra (100.9 FPS), and the 736.3 GB/s bandwidth and 256-bit bus provide enough headroom for the game’s High preset, which maintains 116.1 FPS.

Q: What is the CPU’s single-core performance relative to its multi-core?

A: The 3DMark single-thread score of 884 is 12.1% of the 16-thread score (7299), while Cinebench R23 single-core (3397) is 14.1% of multi-core (24063), indicating balanced scaling that suits Overpower’s mixed thread usage.

GPU Role

The NVIDIA GeForce RTX 4080 SUPER, built on the Ada Lovelace architecture with a 5 nm process, is the clear workhorse in this pairing. Its 10240 shading units, 320 TMUs, and 112 ROPs deliver a pixel rate of 285.6 GPixel/s and a texture rate of 816.0 GTexel/s, which directly translate to the high frame rates seen in the measured data. The GPU’s boost clock of 2550 MHz and 16 GB of GDDR6X memory with 736.3 GB/s bandwidth allow it to maintain 116.1 FPS at 4K High, a result that places it in the 88th percentile of all GPUs.

The 4080 SUPER’s average benchmark score of 53610 puts it just 0.2% ahead of the AMD Radeon RX 6900 XT (53489) and 2.1% ahead of the AMD Radeon RX 7700S (52505), yet the measured game performance shows a clear advantage over these rivals in Overpower’s specific workload. The GPU’s 80 RT cores and 320 tensor cores are not directly measured in this game’s FPS data, but the 3DMark Steel Nomad DX12 score of 6600 indicates strong DirectX 12 performance, which aligns with the game’s modern rendering pipeline.

At 1080p Low, the GPU achieves 214.4 FPS, which is 9.7% higher than the 4K Low result of 195.5 FPS, demonstrating that the 4080 SUPER has significant headroom even at high resolutions. The gap between Medium and High settings at 1440p is only 8.7 FPS, but at 4K that gap narrows to 10 FPS, suggesting that the GPU’s memory bandwidth becomes more critical as resolution increases. The PassMark G3D score of 34245 and Geekbench OpenCL score of 246994 reinforce the GPU’s position as a top-tier part, though the game’s measured results are the most reliable indicator of real-world performance.

Measured FPS Breakdown

At 1920x1080, the RTX 4080 SUPER delivers a wide range of performance depending on preset. Low settings produce 214.4 FPS, Medium drops to 169.8 FPS, High settles at 158.6 FPS, and Ultra bottoms out at 126.8 FPS. The spread from Low to Ultra is 87.6 FPS, indicating that the GPU has ample headroom at 1080p but that Ultra settings still exact a significant toll.

Moving to 2560x1440, the results scale predictably: Low hits 208.5 FPS, Medium achieves 148.7 FPS, High reaches 140 FPS, and Ultra falls to 117.8 FPS. The drop from 1080p to 1440p is most pronounced at Medium (21.1 FPS loss) and least at Low (5.9 FPS loss), showing that the GPU’s fill rate becomes more constrained as pixel count rises.

At 3840x2160, the 4K results are the most telling. Low settings maintain 195.5 FPS, which is surprisingly close to the 1080p Low figure, while Medium drops to 126.1 FPS, High to 116.1 FPS, and Ultra to 100.9 FPS. The 4K Ultra result is 20.4% lower than the 1080p Ultra figure, confirming that the GPU is the primary bottleneck at the highest settings. The 4K Medium result is 14.3% lower than the 1440p Medium result, and the 4K High result is 17.1% lower than 1440p High, illustrating consistent scaling that favors lower presets at higher resolutions. Overall, the combo’s rank of 151 out of 1744 tested configurations places it in the top 8.7% of all combinations for Overpower, a strong showing for a CPU that launched with a $449 MSRP and a GPU with a $999 launch MSRP.