Overpower

Overpower

AVERAGE FPS
110
good

This combination provides smooth gameplay with an average of 110 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 69 81 88 139
1440p QHD 80 95 103 164
1080p Full HD 90 108 115 185

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 139
3840x2160 Medium 88
3840x2160 High 81
3840x2160 Ultra 69
2560x1440 Low 164
2560x1440 Medium 103
2560x1440 High 95
2560x1440 Ultra 80
1920x1080 Low 185
1920x1080 Medium 115
1920x1080 High 108
1920x1080 Ultra 90

Overpower with AMD Ryzen 7 5800X + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

The AMD Ryzen 7 5800X paired with the NVIDIA GeForce RTX 3070 Ti delivers a consistently fluid experience in Overpower, with the data showing that the Ultra preset is the most demanding yet still remains playable across all tested resolutions. At 1080p, the Ultra setting yields an average of 89.6 FPS, which is only slightly below the 108.3 FPS of the High preset, indicating that the visual upgrade is relatively inexpensive. The Medium preset at 1080p produces 114.7 FPS, making it a strong middle ground. However, the most compelling option for maximizing frame rates without sacrificing too much visual fidelity is the High preset, which at 1440p still manages 94.6 FPS, a figure that remains smooth for fast-paced action. The Low preset, while pushing frame rates to 185 FPS at 1080p, represents a significant drop in visual quality that is rarely necessary given the headroom available. For users with high-refresh-rate 1440p displays, High is the recommended starting point, while 4K users should consider Medium, which holds 87.7 FPS, as the best balance between performance and image quality.

CPU Role

The AMD Ryzen 7 5800X is a Zen 3 (Vermeer) processor with 8 cores and 16 threads, a configuration that provides ample parallelism for modern game engines. Its base clock of 3.80 GHz and boost clock of 4.70 GHz are indicative of strong single-thread performance, which is often critical for game logic and draw calls. The benchmark data reinforces this: the CPU scores 943 in 3dmark_single_thread and 3327 in cinebench_r23_singlecore, placing it in the 84th percentile among all CPUs. In multi-threaded workloads, the processor is equally capable, achieving 7578 in 3dmark_max_threads and 23571 in cinebench_r23_multicore. This balance suggests that in Overpower, the CPU is unlikely to be the primary bottleneck, especially at higher resolutions. The 32 MB of L3 cache is substantial, reducing latency for frequently accessed data. The data implies that the 5800X provides a solid foundation, allowing the RTX 3070 Ti to operate near its full potential without being starved of data. The processor’s nearest rival, the AMD Ryzen 7 5800, scores a nearly identical average benchmark score of 27535, with a deltaPct of just 0.3%, indicating that the 5800X’s slight edge in synthetic tests has minimal practical impact on gaming performance.

GPU Role

The NVIDIA GeForce RTX 3070 Ti is built on the Ampere architecture and features 8 GB of GDDR6X memory on a 256-bit bus, delivering a memory bandwidth of 608.3 GB/s. This is a critical specification for Overpower, as the game’s texture-heavy scenes at 4K resolution will heavily tax the memory subsystem. The GPU’s base clock is 1575 MHz, with a boost clock of 1770 MHz, and it houses 6144 shading units. The 48 RT cores and 192 tensor cores suggest the card is well-prepared for ray-traced effects, though the measured data does not isolate those settings. The pixel rate of 169.9 GPixel/s and texture rate of 339.8 GTexel/s are high, indicating strong fill-rate capabilities. In synthetic benchmarks, the GPU scores 23356 in passmark_g3d, placing it in the 74th percentile of all GPUs. However, its nearest rivals in the database are surprising: the AMD Radeon RX 590 GME has a deltaPct of 0.3%, and the AMD Radeon RX 6700 is -0.8% behind. This suggests that while the 3070 Ti has a high absolute score, the competitive landscape in this benchmark is tight. The 8 GB VRAM capacity may become a limiting factor at 4K Ultra, where memory pressure is highest, potentially explaining the significant frame rate drop observed.

How This Combo Ranks

In the context of all tested combos for Overpower, the Ryzen 7 5800X and RTX 3070 Ti combination ranks 662nd out of 1744. This places it in the upper-middle tier of configurations, indicating that while it is not a top-tier extreme-performance setup, it is decidedly above average. The rank implies that a substantial number of tested systems outperform it, likely those with newer generation CPUs or higher-end GPUs. However, the ranking must be interpreted with the measured FPS data in mind. At 1080p, the combo achieves 185 FPS on Low settings, which is exceptionally high, but the rank suggests that other combinations can push even higher. The data indicates that the combo’s performance is well-rounded, with no single resolution or setting proving to be a weak point. The 662nd rank out of 1744 means it outperforms roughly 62% of all tested combinations, which is a respectable position for a hardware pairing that is not the absolute latest generation. This suggests that for a mainstream high-performance setup, it delivers a very consistent experience across the board.

Resolution Scaling

The FPS data reveals a clear scaling pattern as resolution increases, which points to the GPU being the dominant limiting factor. Moving from 1080p to 1440p on High settings, the average frame rate drops from 108.3 FPS to 94.6 FPS, a decrease of 13.7 FPS or approximately 12.7%. The drop from 1440p to 4K is more pronounced, falling from 94.6 FPS to 81.4 FPS, a reduction of 13.2 FPS or about 14%. This pattern is consistent across all settings. For example, on Ultra, the frame rate goes from 89.6 FPS at 1080p to 80.3 FPS at 1440p, and then to 69 FPS at 4K. The total drop from 1080p to 4K on Ultra is 20.6 FPS, which is a 23% reduction. This scaling behavior is classic evidence of a GPU-bound scenario. If the CPU were the bottleneck, the frame rates would remain relatively flat as resolution increases, since the CPU workload would be unchanged. The fact that frame rates decline steadily with resolution indicates that the RTX 3070 Ti’s rendering capabilities are being increasingly taxed, while the 5800X has sufficient headroom to keep up. The 4K Ultra setting, at 69 FPS, is the only configuration that approaches the edge of playability, suggesting that the GPU’s 8 GB VRAM and memory bandwidth are the constraining factors at this extreme.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four settings. At 1920x1080, the Low preset delivers the highest average frame rate at 185 FPS, followed by Medium at 114.7 FPS, High at 108.3 FPS, and Ultra at 89.6 FPS. The gap between Low and Medium is substantial, indicating a large jump in visual fidelity that costs 70.3 FPS. However, the difference between Medium and High is only 6.4 FPS, while High to Ultra is a further 18.7 FPS drop. At 2560x1440, the pattern is similar: Low achieves 163.8 FPS, Medium 102.9 FPS, High 94.6 FPS, and Ultra 80.3 FPS. The relative performance gap between resolutions is consistent, with 1440p being roughly 10-15% slower than 1080p at each setting. At 3840x2160, the performance is more constrained: Low produces 138.5 FPS, Medium 87.7 FPS, High 81.4 FPS, and Ultra 69 FPS. The 4K Low setting is still very playable, but the Ultra setting drops below the 70 FPS threshold, which may be noticeable in fast-paced action. The data shows that the combo is capable of high refresh rates at 1080p and 1440p on lower settings, but 4K gaming requires a compromise on settings to maintain smooth gameplay.

FAQ

Q: What is the best setting for a 1440p monitor with a high refresh rate?

A: The High preset at 2560x1440 delivers an average of 94.6 FPS, making it the ideal choice for a smooth 1440p experience. The Ultra preset drops to 80.3 FPS, which is still playable but offers diminishing returns for the additional performance cost.

Q: Can this combo handle 4K gaming?

A: Yes, but with limitations. At 4K, the Medium preset achieves 87.7 FPS, which is smooth, while the Ultra preset falls to 69 FPS. The Low preset reaches 138.5 FPS, showing that the GPU has enough power for 4K, but the higher settings will stress the 8 GB VRAM.

Q: How does the CPU compare to its closest rival in synthetic benchmarks?

A: The AMD Ryzen 7 5800X has an average benchmark score of 27606, which is only 0.3% higher than the AMD Ryzen 7 5800’s score of 27535. This indicates a negligible performance difference between the two processors.

Q: Is the GPU’s performance consistent with its synthetic benchmark ranking?

A: The RTX 3070 Ti scores 23356 in passmark_g3d and is in the 74th percentile of all GPUs. However, its nearest rival, the AMD Radeon RX 590 GME, is only 0.3% behind, suggesting that the synthetic ranking may not fully reflect the real-world gaming performance in Overpower.

Q: What is the frame rate difference between 1080p and 4K on High settings?

A: At 1080p High, the average frame rate is 108.3 FPS, while at 4K High it is 81.4 FPS. This represents a decrease of 26.9 FPS, or approximately 24.8%, indicating a significant performance hit at higher resolutions.

Q: Does the CPU have enough single-thread performance for this game?

A: Yes, the CPU scores 943 in 3dmark_single_thread and 3327 in cinebench_r23_singlecore, placing it in the 84th percentile of all CPUs. This strong single-thread performance is sufficient to avoid bottlenecking the GPU in most scenarios, as evidenced by the consistent frame rate scaling across resolutions.

Hardware Specifications

AMD Ryzen 7 5800X

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4700 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800X + NVIDIA GeForce RTX 3070 Ti in Overpower

Resolution Settings Avg FPS
3840x2160 Low 138.5
3840x2160 Medium 87.7
3840x2160 High 81.4
3840x2160 Ultra 69.0
2560x1440 Low 163.8
2560x1440 Medium 102.9
2560x1440 High 94.6
2560x1440 Ultra 80.3
1920x1080 Low 185.0
1920x1080 Medium 114.7
1920x1080 High 108.3
1920x1080 Ultra 89.6

Overpower with Ryzen 7 5800X + Other GPUs

See how Overpower performs with the same CPU but different graphics cards.

Overpower with RTX 3070 Ti + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with Ryzen 7 5800X + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.