Overpower

Overpower

AVERAGE FPS
64
good

This combination provides smooth gameplay with an average of 64 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 48 50 83
1440p QHD 45 56 60 95
1080p Full HD 54 59 69 106

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 83
3840x2160 Medium 50
3840x2160 High 48
3840x2160 Ultra 41
2560x1440 Low 95
2560x1440 Medium 60
2560x1440 High 56
2560x1440 Ultra 45
1920x1080 Low 106
1920x1080 Medium 69
1920x1080 High 59
1920x1080 Ultra 54

Overpower with AMD Ryzen 5 9600X + NVIDIA GeForce GTX 1070, In-Depth Analysis

Overpower presents a demanding workload for this pairing of an AMD Ryzen 5 9600X and an NVIDIA GeForce GTX 1070. The measured frame rates show a system that can deliver playable performance at some settings, but it clearly struggles to maintain high refresh rates at higher resolutions and quality presets. The data indicates a significant bottleneck in the graphics card, as the CPU's strong multi-threaded capabilities are not fully utilized in this action title.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and clearly identifies the GPU as the limiting component. At High settings, the average FPS falls from 59.3 at 1920x1080 to 55.7 at 2560x1440, a modest decline of about 6%. However, moving to 3840x2160 drops the average to 47.8 FPS, which is a 19% reduction from the 1440p figure and a 24% drop from 1080p. This pattern repeats across all presets, with the most dramatic scaling seen at Low settings, where performance falls from 105.8 FPS at 1080p to 82.6 FPS at 4K. This 22% performance hit at the lowest settings, where CPU overhead is minimal, confirms that the GeForce GTX 1070's rendering throughput is the primary constraint. The bandwidth and fill rate of the card are being saturated as pixel count increases.

Settings Recommendations

The benchmark results point to Medium settings as the practical sweet spot for this configuration. At 1920x1080, Medium yields 68.6 FPS, which is a 16% improvement over High's 59.3 FPS and provides a smoother experience than the 53.9 FPS seen at Ultra. The jump from Low to Medium is also significant, with a 35% performance penalty for the visual upgrade, but the gain in stability is worth it. At 2560x1440, Medium remains viable at 59.9 FPS, nearly matching the 1080p High preset's frame rate, making it the highest quality setting that can maintain a consistent 60 FPS experience at that resolution. The data shows that Ultra is not a playable option for this GPU, as it drops below 54 FPS at 1080p and falls to 40.7 FPS at 4K. For users prioritizing frame rate over visual fidelity, Low at 1440p provides 95 FPS, which is a solid high-refresh option, but the visual compromise is considerable.

CPU Role

The AMD Ryzen 5 9600X provides more than enough processing power for this game, even at lower resolutions where the CPU load is highest. With 6 cores and 12 threads, the processor scales well in synthetic benchmarks, scoring 25,525 in Cinebench R23 multicore and 3,603 in the single-core test. This strong single-thread performance, reflected in a 3dmark single-thread score of 1,253, is crucial for game logic and draw calls. The data shows that at 1080p Low, the system achieves 105.8 FPS, indicating that the CPU is not holding back the GPU. The processor's 85th percentile ranking versus all CPUs and its proximity to rivals like the Intel Core i5-13490F, which it edges out by 0.3%, show it is a top-tier performer. The 3dmark scores also demonstrate excellent scaling from 2 threads (2,456) to 8 threads (6,726), with a max thread score of 7,590, ensuring that even heavily threaded game engines will have ample headroom.

FAQ

Q: Can this system run Overpower at 4K resolution?

A: Yes, but only at Low settings, where it achieves an average of 82.6 FPS. At Medium, the average drops to 49.8 FPS, and at High it is 47.8 FPS, which will feel less fluid.

Q: What is the best settings preset for a 60 FPS target at 1440p?

A: The Medium preset is the only one that consistently reaches the target, with an average of 59.9 FPS. The High preset falls short at 55.7 FPS.

Q: How does the CPU compare to its direct competitors in processing power?

A: The Ryzen 5 9600X has an average benchmark score of 28,246, which is 0.3% higher than both the Intel Core i5-13490F and the AMD Ryzen 5 230. It is also 0.4% ahead of the AMD Ryzen 7 8845HS.

Q: Is the graphics card the main bottleneck in this system?

A: Yes. The performance drop from 1080p to 4K at Low settings (from 105.8 to 82.6 FPS) shows a clear GPU limit. The CPU's high benchmark scores suggest it has significant headroom left unused.

Q: Is it better to lower resolution or settings for a frame rate boost?

A: The data shows that lowering settings has a larger impact. At 1080p, moving from High to Low increases FPS by 78%. In comparison, moving from 1080p High to 1440p Low increases FPS by 60%, but with a lower resolution image.

Q: What is the performance difference between the High and Ultra presets?

A: The Ultra preset is significantly more demanding. At 1080p, High averages 59.3 FPS while Ultra averages 53.9 FPS, a 10% performance drop. At 4K, the gap widens to a 15% drop, from 47.8 to 40.7 FPS.

GPU Role

The NVIDIA GeForce GTX 1070 is the definitive limiting factor in this configuration. The benchmark data shows a clear ceiling on performance that the CPU cannot overcome. The GPU's 8 GB of GDDR5 memory on a 256-bit bus provides 256.3 GB/s of bandwidth, which is insufficient for the demands of 4K High and Ultra settings, where the average FPS falls to 47.8 and 40.7 respectively. The card's 6.463 TFLOPS of FP32 compute and a texture rate of 202.0 GTexel/s are simply not enough to drive the high pixel counts. The GPU's 51st percentile ranking among all GPUs and its average score of 12,331, which is only 0.7% above the NVIDIA Quadro K4200, place it in the mid-range of performance. The 3dmark Steel Nomad DX12 score of 1,082 confirms its struggles with modern DirectX 12 titles. The card is an end-of-life product, and while it can handle 1080p and 1440p at medium settings, its age is evident at higher resolutions.

Measured FPS Breakdown

At 1920x1080, the frame rates are as follows: Low averages 105.8 FPS, Medium averages 68.6 FPS, High averages 59.3 FPS, and Ultra averages 53.9 FPS. This shows a clear hierarchy where the Low preset offers more than double the frame rate of Ultra.

Moving to 2560x1440, the averages are 95 FPS on Low, 59.9 FPS on Medium, 55.7 FPS on High, and 45.2 FPS on Ultra. The drop from 1080p to 1440p is most pronounced on the Low preset, a 10% decrease, while the impact on High is only a 6% decrease.

At 3840x2160, the results show significant strain: Low averages 82.6 FPS, Medium averages 49.8 FPS, High averages 47.8 FPS, and Ultra averages 40.7 FPS. The gap between Low and Medium at 4K is 40%, highlighting the massive cost of increased graphical fidelity. The data indicates that the GTX 1070 is only capable of delivering a smooth experience at 4K when all other settings are at their absolute minimum. The system's overall rank in Overpower is 1455 out of 1744 tested combinations, placing it in the lower 17% of all hardware configurations, which underscores its struggles with this title.

Hardware Specifications

AMD Ryzen 5 9600X

Cores / Threads 6 / 12
Base Clock 3900 MHz
Boost Clock 5400 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 9600X + NVIDIA GeForce GTX 1070 in Overpower

Resolution Settings Avg FPS
3840x2160 Low 82.6
3840x2160 Medium 49.8
3840x2160 High 47.8
3840x2160 Ultra 40.7
2560x1440 Low 95.0
2560x1440 Medium 59.9
2560x1440 High 55.7
2560x1440 Ultra 45.2
1920x1080 Low 105.8
1920x1080 Medium 68.6
1920x1080 High 59.3
1920x1080 Ultra 53.9

Overpower with GTX 1070 + Other CPUs

See how Overpower performs with the same GPU but different processors.

Other Games with Ryzen 5 9600X + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.