Archeage

Archeage

AVERAGE FPS
53
playable

This combination offers playable performance with an average of 53 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 16 27 35 39
1440p QHD 31 43 66 73
1080p Full HD 46 63 94 106

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 39
3840x2160 Medium 35
3840x2160 High 27
3840x2160 Ultra 16
2560x1440 Low 73
2560x1440 Medium 66
2560x1440 High 43
2560x1440 Ultra 31
1920x1080 Low 106
1920x1080 Medium 94
1920x1080 High 63
1920x1080 Ultra 46

Archeage with AMD Ryzen 5 9600X + NVIDIA GeForce GTX 1070, In-Depth Analysis

The AMD Ryzen 5 9600X paired with the NVIDIA GeForce GTX 1070 in ArcheAge presents a study in bottlenecks, where a modern processor meets an aging graphics card in a decade-old MMORPG. The measured frames per second reveal a system whose performance is dictated almost entirely by resolution and settings, with the CPU showing its strength only when the GPU is given lighter work. This combination lands at rank 1443 out of 1727 tested combos for this game, placing it in the lower third of all pairings, a position that reflects the GPU's vintage rather than the CPU's capability.

Resolution Scaling

The data shows a steep performance cliff as resolution climbs, confirming that the GTX 1070 is the limiting component. At 1080p with Low settings, the combo achieves 106.2 FPS, but this falls to 73.1 FPS at 1440p and then to 39.2 FPS at 4K. That is a drop of 31% from 1080p to 1440p and another 46% from 1440p to 4K. The pattern is consistent across all settings, indicating a GPU that runs out of pixel-pushing capacity long before the CPU is stressed.

The scaling from 1440p to 4K is particularly revealing. At High settings, the frame rate goes from 42.7 FPS to 26.9 FPS, a 37% reduction. At Medium settings, it goes from 65.8 FPS to 34.9 FPS, a 47% drop. These large percentage losses suggest that memory bandwidth and fill rate are being saturated, as the GTX 1070's 256.3 GB/s bandwidth and 107.7 GPixel/s pixel rate struggle with the 8.3 million pixels of 4K. The CPU's role here is minimal; even a much weaker processor would likely produce similar 4K results.

The 1080p to 1440p transition shows a more moderate decline, averaging around 30-35% across settings. This is typical for a GPU with 8 GB of GDDR5 memory on a 256-bit bus. At 1080p, the GTX 1070 can flex its 1920 shading units and 120 texture mapping units, but the workload per pixel increases faster than the card can compensate once resolution rises. The data implies that this combo is best suited for 1080p gaming, where the CPU can actually contribute to performance.

FAQ

Q: What is the highest average frame rate this combo achieves in ArcheAge?

A: The best result is 106.2 FPS at 1920x1080 with Low settings. This is the only measured configuration that exceeds 100 FPS, and it represents the ceiling for this pairing.

Q: How does the combo perform at 4K resolution?

A: At 3840x2160, the frame rates range from 15.7 FPS on Ultra to 39.2 FPS on Low. The High preset yields 26.9 FPS, which is below the 30 FPS threshold often considered playable.

Q: Is the Ryzen 5 9600X the bottleneck in this system?

A: No. The benchmark data shows that the GTX 1070 is the limiting factor, especially at higher resolutions. The CPU's benchmark scores, such as a Geekbench single-core score of 3363 and a Cinebench R23 multi-core score of 25525, are far above what ArcheAge requires.

Q: What is the combo's rank among all tested configurations for this game?

A: It ranks 1443 out of 1727 combos. This places it in the bottom 17% of all tested pairings, reflecting the GPU's age more than the CPU's performance.

Q: How does the GTX 1070 compare to its nearest rival in GPU benchmarks?

A: The GTX 1070 has an average benchmark score of 12331, which is 0.7% higher than the NVIDIA Quadro K4200 and 1.3% lower than the NVIDIA GeForce GTX 880M. This places it in the 51st percentile of all GPUs.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings produce 73.1 FPS while Ultra produces 31.4 FPS. This 41.7 FPS gap (a 57% reduction) demonstrates the heavy cost of the highest preset.

GPU Role

The GTX 1070, built on the Pascal architecture with a 16 nm process, provides 8 GB of GDDR5 memory on a 256-bit bus, delivering 256.3 GB/s of bandwidth. Its base clock is 1506 MHz with a boost clock of 1683 MHz. These specifications, while dated, are the defining factor for this combo's performance in ArcheAge. The card's 1920 shading units and 64 ROPs handle the game's directx 11 workload, which is evident in the PassMark DirectX 11 score of 100, compared to just 48 for DirectX 12.

The VRAM capacity is sufficient for ArcheAge at all tested resolutions; the data does not indicate any texture swapping or memory-related stuttering. Instead, the limiting factor appears to be raw compute and memory bandwidth. At 4K Ultra, the frame rate collapses to 15.7 FPS, a figure that suggests the GPU is overwhelmed by the combination of resolution and effects. The gap between Low and Medium at 4K (39.2 vs 34.9 FPS) is just 4.3 FPS, while the gap between Medium and High (34.9 vs 26.9 FPS) is 8 FPS, showing that the High preset introduces costs that the card cannot sustain.

The GPU's percentile ranking of 51 against all GPUs places it exactly in the middle of the pack, but its nearest rivals include the GTX 1650 SUPER (1.4% faster) and Quadro K4200 (0.7% slower). This means that in pure benchmark terms, the GTX 1070 is competitive with much newer budget cards, but in real-world ArcheAge testing, its age shows. The 8 Gbps effective memory speed is a bottleneck at higher resolutions, where the demand for texture reads and pixel writes exceeds what the card can deliver.

Settings Recommendations

The measured data provides a clear hierarchy for the best experience. At 1920x1080, the only resolution where this combo can be considered fully playable, Low settings yield 106.2 FPS, Medium yields 94 FPS, and High yields 63 FPS. The jump from Medium to High costs 31 FPS (a 33% reduction), which is significant for a game that might involve large-scale battles. The Ultra preset at 1080p drops to 46 FPS, which is still playable but introduces the risk of stutter in crowded areas.

Given the data, the recommended preset is Medium at 1080p. This provides 94 FPS, a smooth frame rate that leaves headroom for frame time spikes, while the visual improvement over Low is substantial. The High preset at 63 FPS is acceptable for single-player exploration but may become marginal in group content. At 1440p, the situation is more constrained: Low at 73.1 FPS is the only smooth option, while Medium at 65.8 FPS is borderline and High at 42.7 FPS is likely to feel sluggish. The 4K resolution should be avoided entirely, as even Low at 39.2 FPS is below the ideal threshold, and Ultra at 15.7 FPS is unplayable.

The data suggests that the sweet spot is 1080p Medium, which offers a 47.7 FPS advantage over 1440p Medium (94 vs 65.8 FPS). This is a 42% improvement in frame rate for a single step down in resolution, indicating that players should prioritize resolution over settings for this GPU.

How This Combo Ranks

The combo's rank of 1443 out of 1727 tested configurations places it in the 16th percentile of all combinations for ArcheAge. This is a low ranking that reflects the GPU's age relative to the CPU. The Ryzen 5 9600X is a current-generation processor with a 85th percentile ranking among all CPUs, while the GTX 1070 sits at the 51st percentile among GPUs. The mismatch is stark: a top-tier CPU paired with a mid-tier GPU from 2016.

This ranking implies that the CPU is not contributing to the combo's low position. If the GTX 1070 were replaced with a modern mid-range GPU, the combo would likely jump hundreds of places. The data shows that ArcheAge is not CPU-intensive at the measured settings; the frame rates scale inversely with resolution, which is a classic GPU-bound signature. The CPU's 6 cores and 12 threads are more than sufficient for the game's single-threaded tendencies, as evidenced by its 3DMark single-thread score of 1253 and PassMark single-thread score of 4570.

The rank also places this combo below many older CPU/GPU pairings that feature lower-end processors but stronger graphics cards. This is because ArcheAge's rendering workload is dominated by GPU fill rate and memory bandwidth, both of which are weak points for the GTX 1070. The combo's position is therefore a direct consequence of the GPU's capabilities, not a reflection of the CPU's performance.

Measured FPS Breakdown

The full dataset reveals a consistent pattern across all nine tested configurations. At 1920x1080, the frame rates are: Low 106.2 FPS, Medium 94 FPS, High 63 FPS, and Ultra 46 FPS. The spread from Low to Ultra is 60.2 FPS, with the largest single drop occurring between Medium and High (31 FPS). At 2560x1440, the results are: Low 73.1 FPS, Medium 65.8 FPS, High 42.7 FPS, and Ultra 31.4 FPS. The spread here is 41.7 FPS, with the Medium to High drop of 23.1 FPS being the most significant.

At 3840x2160, the results are: Low 39.2 FPS, Medium 34.9 FPS, High 26.9 FPS, and Ultra 15.7 FPS. The spread is 23.5 FPS, and the drop from High to Ultra is 11.2 FPS, which is the largest proportional loss in the entire dataset (a 42% reduction). This indicates that the Ultra preset adds effects that are disproportionately expensive at 4K.

Comparing across resolutions, the Low preset shows the smallest resolution penalty: 106.2 to 73.1 to 39.2 FPS, a 63% total reduction from 1080p to 4K. The High preset shows a larger penalty: 63 to 42.7 to 26.9 FPS, a 57% reduction. The Ultra preset shows the steepest decline: 46 to 31.4 to 15.7 FPS, a 66% reduction. These percentages confirm that the GPU's limitations become more pronounced as settings increase.

CPU Role

The AMD Ryzen 5 9600X is a 6-core, 12-thread processor from the 9000 series, based on the Zen 5 architecture (Granite Ridge) and built on a 4 nm process. It has a base clock of 3.90 GHz and a boost clock of 5.40 GHz, with 32 MB of shared L3 cache. Its benchmark results are impressive: a Cinebench R23 multi-core score of 25525 and a single-core score of 3603, along with a Geekbench single-core score of 3363.

In ArcheAge, the CPU's role is to feed the GPU with draw calls and handle game logic. The data shows that the CPU is not a bottleneck at any resolution. At 1080p Low, the frame rate of 106.2 FPS is likely near the game's engine limit for this CPU, but the fact that frame rates drop significantly at higher resolutions proves that the GPU is the limiting factor. The CPU's 32 MB of L3 cache and 89.6 GB/s memory bandwidth are more than adequate for the game's data streaming requirements.

The CPU's nearest rivals include the Intel Core i5-13490F (0.3% faster) and the AMD Ryzen 7 8845HS (0.4% slower), but these comparisons are irrelevant to the game's performance. The 9600X's 85th percentile ranking among all CPUs indicates that it is a high-end processor, yet the combo's overall rank is low. This disconnect is the clearest evidence that the CPU is not the performance limiter in this pairing. The game's frame rates are determined by the GTX 1070's ability to render pixels, not by the CPU's ability to issue instructions.

Hardware Specifications

AMD Ryzen 5 9600X

Cores / Threads 6 / 12
Base Clock 3900 MHz
Boost Clock 5400 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 9600X + NVIDIA GeForce GTX 1070 in Archeage

Resolution Settings Avg FPS
3840x2160 Low 39.2
3840x2160 Medium 34.9
3840x2160 High 26.9
3840x2160 Ultra 15.7
2560x1440 Low 73.1
2560x1440 Medium 65.8
2560x1440 High 42.7
2560x1440 Ultra 31.4
1920x1080 Low 106.2
1920x1080 Medium 94.0
1920x1080 High 63.0
1920x1080 Ultra 46.0

Archeage with GTX 1070 + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 5 9600X + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.