Overpower

# Overpower with AMD Ryzen 5 8400F + NVIDIA GeForce RTX 5080

The AMD Ryzen 5 8400F paired with the NVIDIA GeForce RTX 5080 delivers a formidable combination for Overpower, an action title released in 2023. Benchmark data shows this combo ranks 71st out of 1,744 tested configurations, placing it in the top 4% of all systems. The RTX 5080 sits in the 89th percentile among all GPUs, while the Ryzen 5 8400F ranks in the 82nd percentile among all CPUs, indicating a balanced pairing where neither component dramatically bottlenecks the other. Across all tested resolutions and settings, the system never dips below 105.9 FPS average, suggesting the platform is well-suited for high-refresh-rate displays.

Resolution Scaling

The measured FPS data reveals how Overpower scales as resolution increases from 1920x1080 to 3840x2160. At Low settings, the system produces 247.1 FPS at 1080p, dropping to 238.0 FPS at 1440p, and then falling to 218.7 FPS at 4K. This represents only an 11.5% performance reduction from 1080p to 4K at Low settings, indicating that at these lower graphical loads, the CPU is the primary limiting factor—the GPU has ample headroom to spare.

The scaling pattern shifts dramatically at Ultra settings. At 1080p Ultra, the system delivers 140.9 FPS, which drops to 121.8 FPS at 1440p (a 13.6% decrease), and then falls further to 105.9 FPS at 4K (another 13.1% reduction from 1440p). The total 24.8% drop from 1080p to 4K at Ultra settings is more than double the reduction seen at Low settings, demonstrating that the GPU becomes increasingly dominant as graphical complexity rises. This non-linear scaling—where higher settings produce steeper resolution-based declines—confirms that at Ultra, the RTX 5080's rendering pipeline is the constraining factor, while at Low settings, the Ryzen 5 8400F's 6-core, 12-thread configuration limits frame rates.

Medium and High settings occupy intermediate positions in this scaling curve. At Medium, the system achieves 180.0 FPS at 1080p, 162.4 FPS at 1440p, and 134.4 FPS at 4K—a 25.3% total decline. High settings show 169.0 FPS at 1080p, 146.1 FPS at 1440p, and 128.6 FPS at 4K, a 23.9% reduction. The consistency of these percentage drops across Medium, High, and Ultra suggests that Overpower's graphics engine scales predictably with resolution, with the GPU becoming progressively more load-bearing as pixel count increases.

GPU Role

The NVIDIA GeForce RTX 5080 brings substantial hardware to bear on Overpower. Built on the Blackwell 2.0 architecture with a 5 nm process, the GPU features 10,752 shading units, 336 texture mapping units, and 112 raster output units. Its 16 GB of GDDR7 memory on a 256-bit bus provides 960.0 GB/s of bandwidth, which proves ample for this action title even at 4K Ultra settings where the system maintains 105.9 FPS.

Clock speeds are equally important to the GPU's performance profile. The base clock of 2295 MHz boosts up to 2617 MHz, with memory running at 1875 MHz (30 Gbps effective). These clocks, combined with the pixel rate of 293.1 GPixel/s and texture rate of 879.3 GTexel/s, enable the card to sustain high frame rates across all settings. The FP32 compute throughput of 56.28 TFLOPS provides the raw processing power needed for Overpower's particle effects and physics calculations at high resolutions.

The RTX 5080's benchmark scores contextualize its performance. In 3DMark Steel Nomad DX12, it scores 8,637, while PassMark G3D shows 36,565 and Geekbench OpenCL reaches 264,461. These synthetic results align with the measured in-game performance, where the GPU demonstrates it can handle 4K Ultra at over 100 FPS. The nearest rival comparisons show the RTX 5080 performing 1.6% above the Intel Arc A570M and 2.5% above the Intel Arc A580, though these deltas are small enough to suggest the GPU is operating near the expected performance envelope for its class.

FAQ

Q: Does this system maintain playable frame rates at 4K Ultra settings?

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 105.9 FPS. This is well above the 60 FPS threshold typically considered smooth for action games, and the system ranks 71st out of 1,744 tested configurations in Overpower.

Q: How does the CPU influence performance at 1080p Low settings?

A: At 1920x1080 with Low settings, the system achieves 247.1 FPS. The relatively small 11.5% drop when moving to 4K Low (218.7 FPS) indicates the Ryzen 5 8400F becomes the limiting factor at lower graphical loads, as the GPU has sufficient headroom to render frames faster than the CPU can feed it.

Q: What is the performance difference between Medium and Ultra settings at 1440p?

A: At 2560x1440, Medium settings produce 162.4 FPS while Ultra settings yield 121.8 FPS. This represents a 33.3% performance reduction when increasing from Medium to Ultra, showing that Overpower's higher preset levels impose significant additional GPU workload.

Q: How does the RTX 5080 compare to its nearest rivals in synthetic benchmarks?

A: The RTX 5080's average benchmark score of 59,188 places it 1.6% above the Intel Arc A570M and 2.5% above the Intel Arc A580. It trails the Intel Arc Pro A60 by 1.9%, indicating the 5080 sits in a competitive performance band among its closest peers.

Q: Is the Ryzen 5 8400F's 6-core configuration sufficient for this game?

A: The CPU's 6 cores and 12 threads, boosting from 4.20 GHz to 4.70 GHz, deliver strong results. In Cinebench R23, it scores 20,851 multicore and 2,943 single-core, while its PassMark multithread score of 24,530 demonstrates adequate processing power for Overpower's demands without becoming a severe bottleneck.

Q: What frame rate can users expect at 1080p with High settings?

A: At 1920x1080 with High settings, the system delivers 169.0 FPS. This is notably lower than the 247.1 FPS at Low settings, showing that even at 1080p, the High preset introduces enough GPU workload to shift the balance away from CPU limitation.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce 247.1 FPS, representing the ceiling of what this combination can achieve. Medium settings yield 180.0 FPS, while High settings produce 169.0 FPS. Ultra settings at 1080p result in 140.9 FPS. The spread from Low to Ultra at 1080p is 106.2 FPS, demonstrating that Overpower's setting presets have a substantial impact even at the lowest resolution tested.

Moving to 2560x1440, the performance hierarchy remains consistent but compression begins. Low settings produce 238.0 FPS, a modest 3.7% reduction from 1080p. Medium settings yield 162.4 FPS (down 9.8%), High settings produce 146.1 FPS (down 13.6%), and Ultra settings deliver 121.8 FPS (down 13.6%). The absolute spread between Low and Ultra at 1440p narrows to 116.2 FPS, indicating that the GPU's workload scales more proportionally with resolution at this level.

At 3840x2160, the GPU's capabilities are most fully exercised. Low settings still manage 218.7 FPS, showing the RTX 5080's raw throughput. Medium settings drop to 134.4 FPS, while High settings achieve 128.6 FPS. Ultra settings at 4K produce 105.9 FPS, the lowest measured result but still comfortably above 100 FPS. The total spread from Low to Ultra at 4K is 112.8 FPS, and the gap between Medium (134.4 FPS) and High (128.6 FPS) narrows to just 5.8 FPS, suggesting that these two presets impose similar GPU demands at 4K resolution.

CPU Role

The AMD Ryzen 5 8400F, based on the Zen 4 (Phoenix) architecture and manufactured on TSMC's 4 nm process, provides six cores and twelve threads. Its base clock of 4.20 GHz boosts to 4.70 GHz, with a 65 W TDP that keeps power demands modest. The CPU's 16 MB of shared L3 cache, combined with 1 MB L2 per core, supports the memory bandwidth of 83.2 GB/s over dual-channel DDR5.

Synthetic benchmarks position the 8400F as a capable mid-range processor. In Cinebench R23, it achieves 20,851 multicore and 2,943 single-core scores. The 3DMark tests show a scaling pattern from 1,874 in the 2-thread test to 6,165 in max-thread, indicating reasonable multi-threading efficiency. PassMark results reinforce this, with 24,530 multithread and 3,684 single-thread scores. The CPU's average benchmark score of 25,064 places it in the 82nd percentile, and its nearest rival, the AMD Ryzen 7 2700X, scores 25,057—a 0% delta that shows these processors are effectively performance equals.

In Overpower, the CPU's influence is most apparent at lower resolutions and settings. At 1080p Low, the 247.1 FPS result likely approaches the maximum frame rate the 8400F can feed, given that increasing resolution to 4K Low only reduces FPS to 218.7. The 6-core, 12-thread configuration with its 4.70 GHz boost clock provides sufficient single-thread performance for the game's main thread, while the additional threads handle background tasks. The CPU's PassMark physics score of 1,391 and data compression score of 288,994 suggest it can manage the game's simulation and asset streaming demands without major hiccups. However, the relatively modest 16 MB L3 cache may limit performance in scenes with large data sets, as evidenced by the 11.5% FPS drop from 1080p Low to 4K Low—a reduction that occurs despite the GPU having significant headroom at lower settings.