Overpower

The AMD Ryzen 5 8400F paired with the NVIDIA GeForce RTX 3060 Ti delivers a playable but demanding experience in Overpower, with performance scaling that clearly identifies the GPU as the primary constraint across all tested settings. Measured frame rates at 4K Ultra drop to 44.9 FPS, while 1080p Low reaches 131.5 FPS, illustrating a wide performance envelope that depends heavily on both resolution and quality preset.

Resolution Scaling

The transition from 1080p to 4K produces a substantial frame rate penalty, confirming that the RTX 3060 Ti is the limiting component in this configuration. At High settings, average FPS falls from 75.9 at 1920x1080 to 66.9 at 2560x1440, a reduction of 9 FPS, and then to 58.9 at 3840x2160, representing a 17 FPS total drop from 1080p to 4K. This scaling pattern is consistent with GPU-bound rendering, where the increased pixel count at 4K directly taxes the graphics processor’s throughput.

The Low preset shows even more dramatic scaling, which further isolates the GPU’s role. At 1080p Low, the system produces 131.5 FPS; at 1440p Low, it drops to 113 FPS; and at 4K Low, it reaches 100.3 FPS. The 31.2 FPS difference between 1080p and 4K at Low settings is proportionally smaller than the difference at High settings, suggesting that at lower quality presets, the CPU (AMD Ryzen 5 8400F) has enough headroom to feed the GPU, but the GPU still becomes the bottleneck as resolution climbs.

Medium settings follow a similar trajectory: 79.4 FPS at 1080p, 72.9 FPS at 1440p, and 60.7 FPS at 4K. Ultra settings produce the steepest decline, starting at 60.1 FPS at 1080p, falling to 52.5 FPS at 1440p, and bottoming out at 44.9 FPS at 4K. The Ultra preset’s 15.2 FPS drop from 1080p to 4K indicates that the RTX 3060 Ti’s 8 GB GDDR6 memory and 448.0 GB/s bandwidth are heavily taxed by the highest quality settings at higher resolutions.

Benchmark results indicate that the scaling behavior is not linear. The gap between 1080p and 1440p is consistently smaller than the gap between 1440p and 4K for High, Medium, and Ultra presets. For example, at Medium settings, the 1080p-to-1440p drop is 6.5 FPS, while the 1440p-to-4K drop is 12.2 FPS. This suggests that the GPU’s memory bandwidth and shading throughput become progressively more strained as resolution increases, with the 4K resolution amplifying the load beyond what the GA104 chip can comfortably sustain.

FAQ

Q: What is the highest average FPS recorded for this combo?

A: The highest average FPS is 131.5, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra?

A: At 3840x2160 with Ultra settings, the average FPS is 44.9, which is below the 60 FPS threshold typically considered smooth for action games.

Q: What is the difference between 1080p and 4K at High settings?

A: The average FPS drops from 75.9 at 1080p to 58.9 at 4K, a reduction of 17 FPS, indicating a significant performance cost for higher resolution.

Q: Does the CPU or GPU limit performance more in this game?

A: The data shows the GPU is the limiting factor, as frame rates scale predictably with resolution changes, while the CPU’s multi-threaded benchmark scores (e.g., 20,851 in Cinebench R23 multicore) suggest it has ample processing headroom.

Q: Is the combo capable of 4K gaming at any preset?

A: Yes, at 4K Low settings the average FPS is 100.3, which is playable, but at 4K Medium it drops to 60.7 FPS, and at 4K High it falls to 58.9 FPS.

Q: What is the combo’s overall rank among tested configurations?

A: The combo ranks 1287 out of 1744 tested combos in Overpower, placing it in the lower-mid tier of all configurations.

GPU Role

The NVIDIA GeForce RTX 3060 Ti’s specifications directly explain its performance in Overpower. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. This memory configuration is sufficient for 1080p and 1440p gaming, but the 4K results show that 8 GB becomes a limiting factor, especially at Ultra settings where the average FPS drops to 44.9. The memory clock runs at 1750 MHz, with 14 Gbps effective speed, which contributes to the bandwidth but cannot overcome the sheer pixel load at 3840x2160.

The GPU’s compute capabilities are defined by 4,864 shading units, 152 texture mapping units, and 80 raster output units. These resources produce a pixel rate of 133.2 GPixel/s and a texture rate of 253.1 GTexel/s. These figures correlate with the measured frame rates: at 1080p, the pixel rate is sufficient to handle the workload, but at 4K, the required pixel throughput exceeds what the GPU can deliver, resulting in the observed FPS drops.

The RTX 3060 Ti also includes 38 RT cores and 152 tensor cores, though Overpower’s benchmark data does not specify whether ray tracing or DLSS is enabled. The FP32 performance of 16.20 TFLOPS indicates strong raw compute, but the game’s results suggest that memory bandwidth and fill rate are more critical for this title. The GPU’s boost clock of 1665 MHz and base clock of 1410 MHz are typical for the Ampere architecture, and the 200 W TDP reflects the power draw needed to sustain these clocks under load.

The GPU’s percentile ranking of 69 among all GPUs, with an average benchmark score of 25,120, places it slightly below rivals like the AMD Radeon RX 6700M (25,180) and AMD Radeon RX 6600 (25,235), though the deltaPct values are small (-0.2% and -0.5%, respectively). This indicates that the RTX 3060 Ti is competitive with these alternatives, but in Overpower, the measured FPS suggests that the GPU’s 8 GB memory capacity is the primary bottleneck at higher resolutions.

Settings Recommendations

For the best balance of visual quality and frame rate, the Medium preset at 1920x1080 is the recommended starting point, delivering 79.4 FPS. This is comfortably above the 60 FPS target and provides a noticeable improvement over Low settings (131.5 FPS) without the performance penalty of High (75.9 FPS) or Ultra (60.1 FPS). The 1440p Medium preset yields 72.9 FPS, which remains playable and offers higher resolution clarity.

At 4K, the choice is more constrained. Low settings at 4K produce 100.3 FPS, which is smooth, but the visual fidelity is significantly reduced. Medium settings at 4K drop to 60.7 FPS, which is borderline playable, while High settings (58.9 FPS) and Ultra (44.9 FPS) fall below the ideal threshold. For users prioritizing frame rate over detail, 4K Low is the only preset that provides a consistently high FPS.

The data shows that the step from Low to Medium at 1080p costs 52.1 FPS (from 131.5 to 79.4), which is a substantial reduction. In contrast, the step from Medium to High costs only 3.5 FPS (from 79.4 to 75.9), and High to Ultra costs 15.8 FPS (from 75.9 to 60.1). This suggests that Medium provides the most efficient use of the GPU’s resources, offering a significant visual upgrade over Low with a manageable performance hit, while the Ultra preset’s additional cost is not justified by the frame rate at any resolution.

How This Combo Ranks

The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3060 Ti combination ranks 1287 out of 1744 tested combos in Overpower, placing it in the 26th percentile of all configurations. This rank reflects the GPU’s mid-tier positioning, as the RTX 3060 Ti’s percentile ranking of 69 among all GPUs is higher than the combo’s overall rank, indicating that the CPU is not the limiting factor.

The CPU, AMD Ryzen 5 8400F, has a percentile ranking of 82 among all CPUs and an average benchmark score of 25,064. Its nearest rivals include the AMD Ryzen 7 2700X (25,057, 0% delta), AMD Ryzen AI 5 PRO 340 (25,099, -0.1% delta), and AMD Ryzen 5 7500F (24,993, 0.3% delta). These scores show that the 8400F is statistically indistinguishable from its closest competitors, all within 0.3% of each other. The CPU’s 6 cores, 12 threads, and 4.70 GHz boost clock provide solid single-threaded performance (2,943 in Cinebench R23 single-core), which is sufficient for feeding the GPU in Overpower.

The combo’s rank of 1287 suggests that there are 457 configurations that perform better in this game, likely featuring higher-end GPUs with more memory or faster shading units. However, the measured FPS at 1080p High (75.9) and 1440p High (66.9) indicates that this combo is fully capable of delivering a smooth experience at mainstream resolutions and settings. The rank is not a reflection of the CPU’s capability, but rather the GPU’s position in the market, as the RTX 3060 Ti’s 8 GB memory and 16.20 TFLOPS FP32 performance place it in the mid-range segment.