Overpower

Overpower is a demanding action title that stresses both processor and graphics hardware, and this pairing of AMD's Ryzen 5 8400F with the Radeon RX 580 produces a playable but constrained experience. The data shows a system that is firmly GPU-limited at higher resolutions, while the CPU's strong multi-threading capabilities ensure that frame rates scale predictably as graphical loads are reduced. This combination ranks in the lower tier of tested configurations, indicating that while it can run the game, it will not deliver high-refresh-rate performance at maximum quality settings.

Resolution Scaling

The measured FPS data reveals a clear and consistent pattern of performance degradation as resolution increases, which is the classic signature of a graphics-card-bound system. At 1920x1080 with Low settings, the combo achieves an average of 69 FPS. Moving to 2560x1440 at the same settings drops the average to 62 FPS, a reduction of approximately 10%. At 3840x2160 Low, the average falls further to 52 FPS, which is another 16% drop from the 1440p figure. This scaling curve indicates that the RX 580's processing throughput is the primary limiter, as the pixel count increase directly translates into lower frame rates.

The situation becomes more pronounced at higher quality presets. At High settings, the average frame rate goes from 40 FPS at 1080p to 36 FPS at 1440p, and finally to 30 FPS at 4K. This represents a 25% total performance loss from the lowest to the highest resolution tested at this preset. The Ultra preset shows an even steeper decline, with averages of 33 FPS at 1080p, 30 FPS at 1440p, and 25 FPS at 4K. The consistency of these drops—roughly 10-15% per resolution step—confirms that the GPU is saturated across all tested scenarios.

The only exception to this trend is the Medium preset, which shows the smallest absolute differences. At Medium, the 1080p average is 43 FPS, 1440p is 38 FPS, and 4K is 33 FPS, with the minimum frame rates recorded at 37, 33, and 28 FPS respectively. This tighter grouping suggests that at Medium settings, the balance between CPU and GPU load is more even, allowing the Ryzen 5 8400F's six cores and twelve threads to keep feeding the GPU without as much idle time. However, the overall trajectory is unambiguous: Overpower becomes progressively less fluid as resolution climbs, and the limiting component is definitively the Radeon RX 580.

How This Combo Ranks

Within the benchmark database for Overpower, this specific CPU-GPU pairing achieves a combo rank of 3388 out of 3713 tested combinations. This places the system in the bottom percentile of all configurations, specifically in the 8.7th percentile of tested combos. The data indicates that the vast majority of other hardware pairings deliver higher average frame rates in this game, making this a low-tier setup for Overpower enthusiasts.

The ranking reflects the significant bottleneck imposed by the GPU. The Ryzen 5 8400F is a capable processor, placing in the 77th percentile of all CPUs tested, but it is paired with a graphics card that sits in the 53rd percentile of all GPUs. This mismatch means that while the CPU has headroom to compute game logic and physics, the GPU cannot render frames fast enough to utilize that headroom. In practical terms, the combo's rank is dragged down almost entirely by the RX 580's age and performance class.

When compared to other tested configurations, this combo sits well below the median performance level. The rank of 3388 out of 3713 means that only 325 other combinations perform worse in Overpower. This is not a configuration for high-refresh-rate monitors or maximum detail settings; it is a baseline setup that will require compromises to maintain playable frame rates. The data suggests that users with this combo should expect to play at lower resolutions and settings to achieve smooth performance, as the system's overall capability is firmly in the lower tier of the database.

CPU Role

The AMD Ryzen 5 8400F is built on the Zen 4 architecture using a 4 nm process from TSMC, featuring 6 cores and 12 threads. Its base clock is 4.20 GHz with a boost clock of 4.70 GHz, and it has a 65W TDP. The processor includes 64 KB of L1 cache per core, 1 MB of L2 cache per core, and a shared 16 MB of L3 cache. It supports DDR5 memory in a dual-channel configuration with a theoretical bandwidth of 83.2 GB/s, and it connects via PCIe Gen 4 with 20 lanes.

In synthetic benchmarks, this CPU shows strong multi-threaded performance, scoring 20,851 in Cinebench R23 multicore and 6,165 in 3DMark with maximum threads. Its single-thread performance is also respectable, with a Cinebench R23 single-core score of 2,943 and a 3DMark single-thread score of 951. These scores place the processor in the 77th percentile of all CPUs, indicating that it is above average for gaming workloads.

However, in Overpower, the CPU's role is secondary to the GPU. The measured FPS data shows only marginal differences between resolutions at the same settings, which would not occur if the CPU were the bottleneck. For example, at Low settings, the FPS drops from 69 at 1080p to 62 at 1440p and 52 at 4K, a pattern that follows GPU load rather than CPU capability. The CPU's 6 cores and 12 threads are sufficient to feed the RX 580 at all tested settings, as evidenced by the fact that the frame rate scales inversely with resolution. If the CPU were limiting, we would expect to see similar FPS across all resolutions, which is not the case. The processor's nearest rival, the AMD Ryzen 5 7500F, has an average benchmark score of 24,964, which is only 0.2% lower than the 8400F's 25,005, confirming that the CPU is not the weak link in this pairing.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four quality presets. At 1920x1080, the Low preset delivers the highest average at 69 FPS, followed by Medium at 43 FPS, High at 40 FPS, and Ultra at 33 FPS. The Medium preset shows a minimum of 37 FPS and a maximum of 50 FPS, indicating some frame-time variance but generally stable performance. At 1080p Ultra, the system drops to 33 FPS average, which is below the 60 FPS target for smooth gameplay.

At 2560x1440, the Low preset averages 62 FPS, Medium averages 38 FPS with a minimum of 33 and maximum of 44, High averages 36 FPS, and Ultra averages 30 FPS. The 1440p resolution shows a clear step down from 1080p, with the Low preset being the only one that maintains an average above 60 FPS. The High and Ultra presets at this resolution hover around the 30-36 FPS range, which is playable but not ideal for fast-paced action.

At 3840x2160, the performance drops significantly. The Low preset averages 52 FPS, Medium averages 33 FPS with a minimum of 28 and maximum of 38, High averages 30 FPS, and Ultra averages 25 FPS. At 4K, no preset achieves a 60 FPS average, and the Ultra preset dips to 25 FPS, which is a challenging experience for an action game. The data shows that 4K gaming with this combo is only viable at Low settings, and even then, it barely maintains a playable frame rate.

FAQ

Q: What is the best resolution for this combo in Overpower?

A: The data indicates that 1920x1080 is the only resolution where the Low preset achieves an average of 69 FPS, making it the most suitable resolution for smoother gameplay. At 2560x1440, only the Low preset averages above 60 FPS at 62 FPS, while 3840x2160 sees all presets fall below 52 FPS.

Q: How does the CPU compare to its nearest rival?

A: The Ryzen 5 8400F has an average benchmark score of 25,005, which is 0.2% higher than the AMD Ryzen 5 7500F's score of 24,964. It also edges out the Intel Core i7-11850H by 0.3% and the Intel Core i7-13620H by 0.4%, while trailing the AMD EPYC 9474F by 0.4%.

Q: Is the GPU or CPU the bottleneck in this system?

A: The GPU is the clear bottleneck. The FPS scales inversely with resolution, dropping from 69 FPS at 1080p Low to 52 FPS at 4K Low, which indicates the Radeon RX 580 cannot keep up with the CPU's output. The CPU sits in the 77th percentile of all CPUs, while the GPU is in the 53rd percentile.

Q: What is the lowest frame rate recorded in the data?

A: The lowest average frame rate is 25 FPS, recorded at 3840x2160 with Ultra settings. The lowest minimum frame rate is 28 FPS, recorded at 3840x2160 with Medium settings.

Q: How does this combo rank among all tested configurations?

A: This combo ranks 3388 out of 3713 tested combinations in Overpower, placing it in the lower 8.7% of all tested systems. This is a low-tier ranking that reflects the GPU's age and performance limitations.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the Low preset averages 69 FPS, while the Ultra preset averages 33 FPS. This represents a 36 FPS difference, meaning Ultra settings deliver roughly half the frame rate of Low settings.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the user's target resolution and frame rate preference. At 1920x1080, the Low preset is the only option that consistently delivers an average above 60 FPS at 69 FPS, making it the recommended choice for players who prioritize smooth, responsive gameplay. The Medium preset at 43 FPS is a viable alternative for those who want better visual quality, but it will introduce noticeable frame drops in fast-paced scenes, as indicated by the 37 FPS minimum.

For users with a 2560x1440 monitor, the Low preset at 62 FPS is the only setting that maintains a frame rate above the 60 FPS threshold. The Medium preset drops to 38 FPS average, which is playable but may feel less fluid. The High and Ultra presets at 36 and 30 FPS respectively are best avoided for action-heavy sequences, as they fall below the 40 FPS comfort zone.

At 3840x2160, no preset achieves a 60 FPS average. The Low preset at 52 FPS is the most playable option, but it still falls short of smooth gameplay standards. The Medium preset at 33 FPS with a 28 FPS minimum is pushing the limits of playability, and the Ultra preset at 25 FPS should be reserved for static scenes or screenshots rather than actual gameplay.

The overall recommendation is to use the Low preset at 1080p for the best balance of performance and visual clarity. If the user insists on higher resolutions, the Low preset remains the only viable choice at 1440p, and even 4K Low will require compromises. The data shows that this combo is not suited for high-quality settings in Overpower, and users should prioritize frame rate over visual fidelity to maintain a playable experience.