Overpower
This combination provides smooth gameplay with an average of 85 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 52 | 65 | 68 | 106 |
| 1440p QHD | 60 | 75 | 77 | 126 |
| 1080p Full HD | 69 | 84 | 91 | 145 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 7500F + NVIDIA GeForce RTX 2070 SUPER, In-Depth Analysis
The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 2070 SUPER combination delivers a compelling, if not flawless, 1440p experience in Overpower, with the data revealing a system that is firmly GPU-limited at higher resolutions yet surprisingly capable at 1080p. The measured frame rates across the board suggest a pairing where the modern Zen 4 processor provides ample headroom, allowing the older Turing architecture to be the primary determinant of performance, particularly as resolution scales upward.
Resolution Scaling
The frame rate scaling from 1920x1080 to 3840x2160 paints a clear picture of a GPU-bound system. At the Ultra preset, the average FPS drops from 69 at 1080p to 60.1 at 1440p, a relatively modest 13% decline. However, the jump to 4K is far more punishing, with the average collapsing to 52.4 FPS. This pattern is consistent across all settings, but the magnitude of the drop between 1440p and 4K grows as the preset becomes more demanding. For instance, at High settings, the transition from 1440p (75.1 FPS) to 4K (64.7 FPS) represents a 14% loss, while at Low settings, the same resolution jump sees a larger 15.5% decline from 125.8 FPS to 106.3 FPS.
This scaling behavior indicates that the RTX 2070 SUPER's 8 GB of VRAM and its 256-bit memory interface are the primary bottlenecks at 4K. The fact that the Low preset at 4K (106.3 FPS) is still significantly faster than the Ultra preset at 1080p (69 FPS) further confirms that the GPU's compute and memory throughput, rather than the CPU, are being saturated as pixel count increases. The Ryzen 5 7500F, with its 6 cores and 12 threads, appears to have more than enough processing power to feed the GPU at all resolutions, as evidenced by the relatively small performance gaps between 1080p and 1440p where the CPU would typically have a larger influence. The data strongly suggests that for a smoother 4K experience, a more powerful GPU would be necessary, as the current combination loses nearly 44% of its 1080p Ultra performance when moving to 4K Ultra.
How This Combo Ranks
Within the benchmark database, this specific pairing of the Ryzen 5 7500F and RTX 2070 SUPER achieves a combo rank of 1062 out of 1744 tested combinations in Overpower. This places it in the upper-middle tier of all systems, indicating that while it is not a top-tier performer, it is far from being a weak link. The GPU, which sits at the 65th percentile among all tested graphics cards, is the more influential component in this ranking. Its average benchmark score of 22206 is notably close to its nearest rivals, including the NVIDIA RTX A400 (22307, a -0.5% delta) and the AMD Radeon RX 5700 (21670, a 2.5% delta). This suggests the GPU is performing exactly as expected for its class.
The CPU, on the other hand, is a stronger asset. The Ryzen 5 7500F holds an 82nd percentile ranking among all CPUs and an average benchmark score of 24993. This score is nearly identical to its closest rivals, such as the Intel Core i7-11850H (24974, a 0.1% delta) and the AMD Ryzen 9 6900HX (24897, a 0.4% delta). The combination of a high-percentile CPU with a mid-tier GPU means that the system's overall ranking is likely held back by the graphics card. In essence, the data implies that this combo has untapped potential; swapping in a more powerful GPU would likely yield a significant jump in the combo's rank, as the CPU's processing headroom is not the limiting factor in most scenarios.
Settings Recommendations
Based on the measured frame rates, the optimal balance between visual fidelity and performance for this combo is the High preset. At 1440p, the High setting delivers an average of 75.1 FPS, which is a smooth and playable experience for an action game. Moving up to Ultra at this resolution drops the average to 60.1 FPS, which is still playable but leaves less headroom for demanding scenes. The Medium preset at 1440p (76.5 FPS) offers almost no performance advantage over High, making High the clear choice for the best visual return.
For users with a 1080p monitor, the High preset is also the sweet spot, yielding an average of 83.5 FPS. While the Low preset can push the frame rate to 144.7 FPS, the visual sacrifice is likely too great. The Ultra setting at 1080p provides an average of 69 FPS, which is acceptable but might not fully utilize a high-refresh-rate display. At 4K, the situation is more challenging. The Low preset is the only one that consistently breaks the 100 FPS barrier (106.3 FPS), while High and Medium hover around 64-68 FPS, and Ultra drops to 52.4 FPS. For a 4K experience, the data suggests that the High preset is the most viable option, offering a decent frame rate without the severe fidelity loss of Low.
FAQ
*Q: Can this combo handle 4K gaming in Overpower?*
A: Yes, but with significant compromises. At 4K, the High preset averages 64.7 FPS, and the Ultra preset drops to 52.4 FPS. To get smoother performance, you would need to lower settings to Low, which achieves an average of 106.3 FPS.
Q: Is the CPU a bottleneck for the GPU in this game?
A: The data suggests not. The Ryzen 5 7500F ranks in the 82nd percentile for CPUs, and the frame rate scaling from 1080p to 1440p shows only modest drops, indicating the GPU is the limiting component.
Q: How does the RTX 2070 SUPER compare to its direct rivals in this game's context?
A: Its average benchmark score of 22206 is nearly identical to the NVIDIA RTX A400 (22307) and slightly ahead of the AMD Radeon RX 5700 (21670). This suggests it performs as expected for its class, with no significant outlier behavior.
Q: What is the best preset for a 1440p monitor?
A: The High preset is recommended, as it delivers an average of 75.1 FPS. The Medium preset (76.5 FPS) offers virtually the same performance, while Ultra (60.1 FPS) provides a noticeable drop without a proportional visual gain.
Q: Does the 8 GB VRAM cause issues at higher resolutions?
A: The data indicates that the most significant performance drops occur when moving to 4K, particularly on the Ultra preset (52.4 FPS). This, combined with the GPU's 65th percentile ranking, strongly suggests that the 8 GB VRAM and memory bandwidth are limiting factors at 4K.
Q: How does the Ryzen 5 7500F's performance compare to its nearest CPU rivals?
A: Its average benchmark score of 24993 places it within 0.4% of the Intel Core i7-11850H and AMD Ryzen 9 6900HX, confirming it is a very competitive mid-range processor.
GPU Role
The NVIDIA GeForce RTX 2070 SUPER is the defining piece of this puzzle, and the benchmark results highlight its strengths and limitations in Overpower. With a base clock of 1605 MHz and a boost clock of 1770 MHz, it operates at frequencies typical for its generation. The 8 GB of GDDR6 memory on a 256-bit bus provides a bandwidth of 448.0 GB/s. This memory configuration is a critical factor, as the significant frame rate drop at 4K suggests that the GPU is struggling to manage the larger textures and data sets required at that resolution.
The GPU's 65th percentile ranking and average benchmark score of 22206 show that it is a solid, but not exceptional, performer. Its nearest rival, the NVIDIA RTX A400, scores 22307, a negligible 0.5% difference, while the AMD Radeon RX 5700 is 2.5% behind. In Overpower, the GPU's 9.062 TFLOPS of FP32 performance and 283.2 GTexel/s texture rate are sufficient to handle the game at 1080p and 1440p with ease, but the 4K data reveals the hardware's ceiling. The transition from High at 1440p (75.1 FPS) to High at 4K (64.7 FPS) is a 14% loss, a clear signal that the GPU's compute resources are being fully taxed. While it supports DirectX 12 Ultimate, the 12 nm process node and Turing architecture place it at a disadvantage compared to more modern designs, though the data shows it remains capable of a solid 1440p experience.
CPU Role
The AMD Ryzen 5 7500F, based on the Zen 4 Raphael architecture, acts as a powerful and efficient partner to the RTX 2070 SUPER. Its 6 cores and 12 threads, running at a base clock of 3.70 GHz and a boost clock of 5.00 GHz, provide more than enough processing power for Overpower. The processor's strong single-thread performance is evident in its 3dmark_single_thread score of 974 and its high percentile ranking of 82. This is crucial for maintaining high frame rates, as many game engines still rely heavily on single-core performance for game logic and draw calls.
The CPU's 32 MB of shared L3 cache is another asset, reducing latency and improving data access for the GPU. The benchmark results confirm that the CPU is not a bottleneck; the system's frame rate scaling with resolution is consistent with a GPU-limited scenario. In fact, the CPU's average benchmark score of 24993 is remarkably close to its nearest rivals, showing it trades blows with the Intel Core i7-11850H and AMD Ryzen 9 6900HX. This suggests that in CPU-intensive scenes, the 7500F will hold its own, allowing the RTX 2070 SUPER to work at its full potential without waiting on the processor. The data implies that this CPU has significant headroom, and could easily support a more powerful GPU in the future without becoming a limiting factor.
Measured FPS Breakdown
The complete set of measured average FPS data for this combo in Overpower is as follows:
- 1920x1080: The Low preset averages 144.7 FPS, while Medium averages 90.6 FPS. The High preset delivers 83.5 FPS, and the Ultra preset averages 69 FPS.
- 2560x1440: At this resolution, the Low preset averages 125.8 FPS. The Medium and High presets are very close, averaging 76.5 FPS and 75.1 FPS, respectively. The Ultra preset averages 60.1 FPS.
- 3840x2160: The Low preset averages 106.3 FPS, which is the only setting above 70 FPS at this resolution. The High preset averages 64.7 FPS, and Medium averages 68.3 FPS. The most demanding Ultra preset averages 52.4 FPS.
These numbers reveal a clear hierarchy: the system excels at 1080p, is very capable at 1440p with the right settings, and struggles to maintain high frame rates at 4K. The 144.7 FPS result at 1080p Low indicates the system can achieve high refresh rates in less demanding scenarios, while the 52.4 FPS at 4K Ultra shows the limits of the hardware. The data consistently shows that the RTX 2070 SUPER is the primary driver of performance, with the Ryzen 5 7500F providing a stable and powerful foundation.
Hardware Specifications
AMD Ryzen 5 7500F
NVIDIA GeForce RTX 2070 SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce RTX 2070 SUPER in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 106.3 |
| 3840x2160 | Medium | 68.3 |
| 3840x2160 | High | 64.7 |
| 3840x2160 | Ultra | 52.4 |
| 2560x1440 | Low | 125.8 |
| 2560x1440 | Medium | 76.5 |
| 2560x1440 | High | 75.1 |
| 2560x1440 | Ultra | 60.1 |
| 1920x1080 | Low | 144.7 |
| 1920x1080 | Medium | 90.6 |
| 1920x1080 | High | 83.5 |
| 1920x1080 | Ultra | 69.0 |
Overpower with Ryzen 5 7500F + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RTX 2070 SUPER + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 7500F + RTX 2070 SUPER
Explore FPS benchmarks for other games using this same hardware combination.