Overpower

Overpower is an Action title that responds clearly to both processor and graphics throughput, and the combination of the AMD Ryzen 5 7400F with the NVIDIA GeForce RTX 4060 delivers a mid-pack performance profile. The Ryzen 5 7400F is a 6-core, 12-thread desktop processor built on the Zen 4 (Raphael) architecture using a 5 nm process, with a base clock of 3.70 GHz and a boost clock of 4.70 GHz. It carries a 65 W TDP and supports DDR5 memory over a dual-channel bus with 83.2 GB/s of bandwidth. The RTX 4060 is an Ada Lovelace part with 3072 shading units, 24 RT cores, and 96 tensor cores, running at a base clock of 1830 MHz and a boost of 2460 MHz. It has 8 GB of GDDR6 memory on a 128-bit bus, yielding 272.0 GB/s of bandwidth. In the measured frame-rate data for Overpower, this combo ranks 1574 out of 2980 tested combinations, placing it in the 53rd percentile of all tested systems.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 7400F provides six physical cores and twelve threads, which is a solid baseline for modern action titles that typically scale well up to eight threads but rarely use more than twelve efficiently. Its Zen 4 architecture, built on a 5 nm process, offers strong single-thread performance, which is often the bottleneck in games that rely on a primary simulation thread. The boost clock of 4.70 GHz is the key figure here, as it dictates how fast the processor can execute those single-threaded tasks. The L3 cache is 32 MB shared, which helps keep frequently accessed game data close to the cores, reducing memory latency. The processor supports PCIe Gen 5 with 24 lanes, meaning it will not bottleneck the RTX 4060’s PCIe 4.0 x8 interface, though the GPU’s limited bus width is a separate consideration.

Benchmark data places this CPU in the 83rd percentile of all processors, with an average benchmark score of 32750. Its nearest rivals include the Intel Core i5-14600T (avg score 32707, deltaPct 0.1) and the AMD Ryzen 7 PRO 6850H (avg score 32812, deltaPct -0.2). This indicates the CPU is closely matched with those parts, within a fraction of a percent in aggregate performance. In Overpower, the CPU’s role becomes more apparent at lower resolutions where the GPU is less stressed. At 1920x1080 with Low settings, the combo achieves 153 FPS, while at 4K with Low settings it drops to 116 FPS. The 1080p figure is significantly higher, suggesting that at lower resolutions, the CPU is capable of feeding the GPU enough frames to reach that level, and the GPU becomes the limiting factor as resolution increases. The CPU has a PassMark single-thread score of 3689, which is respectable, and a multithread score of 25645, indicating it can handle background tasks without impacting game performance.

The processor’s 65 W TDP is modest, and its benchmark scores in Cinebench R23 (21765 multicore, 3072 single-core) show it is a balanced part. In Overpower, the data shows that at 1080p Ultra, the combo reaches 74 FPS, which is a 52% drop from the 153 FPS at 1080p Low. This drop is primarily due to GPU load, not CPU limitation, as the CPU would still be capable of producing higher frame rates. The Ryzen 5 7400F’s memory bandwidth of 83.2 GB/s is adequate for the game’s demands, and the 32 MB L3 cache helps with data locality. Overall, the CPU is not the bottleneck in this combo; the GPU is the primary limiter at higher settings and resolutions.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: How does the Ryzen 5 7400F compare to its nearest CPU rivals in aggregate benchmark scores?

A: The Ryzen 5 7400F has an average benchmark score of 32750. Its nearest rivals are the Intel Core i5-14600T with a score of 32707 (0.1% slower), the AMD Ryzen 7 PRO 6850H with a score of 32812 (0.2% faster), and the AMD Ryzen AI 7 PRO 360 with a score of 32662 (0.3% slower). The differences are minimal, indicating these processors are essentially equivalent in raw throughput.

Q: What is the peak FPS achieved by this combo in Overpower at 1080p, and at what settings?

A: The highest average FPS recorded is 153 FPS at 1920x1080 with Low settings. At the same resolution with Medium settings, the average drops to 96 FPS, and at High it is 89 FPS. At Ultra, the average is 74 FPS.

Q: Does the RTX 4060 have enough VRAM for 4K gaming in Overpower?

A: The GPU has 8 GB of GDDR6 memory on a 128-bit bus. At 3840x2160 with Ultra settings, the combo achieves an average of 56 FPS. At High settings at 4K, it reaches 67 FPS, and at Medium it is 73 FPS. The data does not indicate any VRAM-related stutters, as the minimum FPS is only recorded for Medium settings (62 FPS), but the averages show playable frame rates even at 4K.

Q: How does the combo rank among all tested combinations in Overpower?

A: This specific CPU and GPU combination ranks 1574 out of 2980 tested combos. This places it in the middle of the pack, with roughly 53% of tested systems performing better and 47% performing worse.

Q: What is the frame rate difference between 1080p and 4K at Ultra settings?

A: At 1920x1080 Ultra, the average FPS is 74. At 3840x2160 Ultra, the average FPS drops to 56. This represents a 24% reduction in frame rate when moving from 1080p to 4K at the highest settings, indicating the GPU is the primary scaling factor.

Q: Is the Ryzen 5 7400F a newer processor compared to the RTX 4060?

A: The CPU was released on 2025-01-08, while the GPU was released on 2023-05-17. The CPU is significantly newer, but the GPU is marked as end-of-life production status, meaning it is no longer being manufactured actively.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data for Overpower shows a consistent pattern of performance degradation as resolution increases, which points to the GPU as the limiting component. At Low settings, the combo achieves 153 FPS at 1080p, 137 FPS at 1440p, and 116 FPS at 4K. The drop from 1080p to 1440p is 16 FPS (10.5%), and from 1440p to 4K is 21 FPS (15.3%). This scaling is roughly proportional to the increase in pixel count, which is a classic sign of GPU-bound performance. The RTX 4060’s 8 GB VRAM and 128-bit bus are the primary constraints, as the fill rate and memory bandwidth must handle more pixels at higher resolutions.

At Medium settings, the frame rates are 96 FPS at 1080p, 85 FPS at 1440p, and 73 FPS at 4K. The drop from 1080p to 1440p is 11 FPS (11.5%), and from 1440p to 4K is 12 FPS (14.1%). The pattern remains consistent. At High settings, the averages are 89 FPS at 1080p, 79 FPS at 1440p, and 67 FPS at 4K. The drop from 1080p to 1440p is 10 FPS (11.2%), and from 1440p to 4K is 12 FPS (15.2%). Finally, at Ultra settings, the averages are 74 FPS at 1080p, 66 FPS at 1440p, and 56 FPS at 4K. The drop from 1080p to 1440p is 8 FPS (10.8%), and from 1440p to 4K is 10 FPS (15.2%).

The relative percentage drops are remarkably consistent across all settings, hovering around 10-12% for the 1080p to 1440p transition and 14-15% for the 1440p to 4K transition. This uniformity strongly suggests that the GPU is the sole limiter, as a CPU bottleneck would typically show larger drops at lower resolutions and smaller drops at higher resolutions (since the CPU would be less stressed at higher resolutions). The CPU’s boost clock of 4.70 GHz is sufficient to maintain high frame rates even at 1080p, as evidenced by the 153 FPS at Low settings. If the CPU were limiting, we would expect the 1080p Low score to be lower and the 4K score to be relatively higher. Instead, the data shows a linear scaling with pixel count, confirming the RTX 4060 is the performance boundary.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a complete matrix of performance across three resolutions and four settings presets. At 1920x1080, the combo achieves an average FPS of 153 on Low, 96 on Medium, 89 on High, and 74 on Ultra. The Medium preset has the only recorded minimum and maximum FPS values at this resolution: 81 FPS minimum and 110 FPS maximum. This suggests that the Medium preset is the most stable in terms of frame pacing, with a 29 FPS range between minimum and maximum. The other presets lack minimum/maximum data, so only averages are available.

Moving to 2560x1440, the averages are 137 FPS on Low, 85 FPS on Medium, 79 FPS on High, and 66 FPS on Ultra. Again, only the Medium preset has min/max data: 73 FPS minimum and 98 FPS maximum, a 25 FPS range. At 3840x2160, the averages are 116 FPS on Low, 73 FPS on Medium, 67 FPS on High, and 56 FPS on Ultra. The Medium preset at 4K shows a minimum of 62 FPS and a maximum of 84 FPS, a 22 FPS range.

The data reveals that the Medium preset consistently provides the most consistent frame delivery, with the narrowest range between minimum and maximum FPS across all resolutions. The spread between Low and Ultra averages is also telling: at 1080p, the difference is 79 FPS (153 versus 74); at 1440p, it is 71 FPS (137 versus 66); and at 4K, it is 60 FPS (116 versus 56). This narrowing gap at higher resolutions indicates that the GPU is becoming increasingly saturated, and the settings have less relative impact on performance. The lowest recorded average FPS in the entire dataset is 56 FPS at 4K Ultra, which is still playable, while the highest is 153 FPS at 1080p Low, which is well above typical refresh rates.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4060 ranks 1574 out of 2980 tested combinations in Overpower. This places it in the 53rd percentile, meaning that slightly more than half of all tested combos perform better. This is a mid-pack ranking, which is consistent with the hardware’s specifications. The RTX 4060 has a percentile rank of 61 among all GPUs, indicating it is in the upper third of graphics cards. The CPU has a percentile rank of 83 among all processors, placing it in the top 17% of CPUs. The combination of a high-percentile CPU with a mid-to-high-percentile GPU results in a combo that is limited by the GPU, which is typical for gaming systems.

The GPU’s nearest rivals in aggregate benchmark scores are the AMD Radeon HD 7790 (avg score 17666, deltaPct -0.2), the AMD Radeon 780M (avg score 17588, deltaPct 0.3), and the AMD Radeon Pro 560 (avg score 17551, deltaPct 0.5). These are all significantly older or lower-tier parts, indicating that the RTX 4060’s 19545 PassMark G3D score is respectable for its class. The combo’s rank of 1574 out of 2980 means there are 1406 combos that perform worse, which is a substantial number. However, the rank also means that 1573 combos perform better, which puts this system in the middle of the field.

The rank is likely influenced by the GPU’s 8 GB VRAM and 128-bit bus, which are modest for modern games at high resolutions. The CPU’s strong performance (83rd percentile) helps boost the combo, but the GPU’s limitations cap the overall potential. In Overpower, the combo’s performance at 4K Ultra (56 FPS) is just above the 60 FPS threshold that many players consider smooth, but the 1080p Low result of 153 FPS shows the system can excel at lower resolutions. The rank of 1574 is a fair reflection of the hardware’s capabilities, and it indicates that this combo is best suited for 1080p and 1440p gaming at high settings, rather than 4K Ultra.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the Medium preset offers the best balance of visual quality and performance across all resolutions. At 1080p Medium, the combo achieves 96 FPS average with a minimum of 81 FPS and a maximum of 110 FPS. This is well above the 60 FPS threshold and provides a smooth experience. At 1440p Medium, the average drops to 85 FPS with a minimum of 73 FPS and a maximum of 98 FPS, which is still very playable. At 4K Medium, the average is 73 FPS with a minimum of 62 FPS, which is just above the 60 FPS target. The Medium preset is the only one with consistent minimum FPS data across all resolutions, suggesting it is the most stable in terms of frame delivery.

The High preset is also viable, with averages of 89 FPS at 1080p, 79 FPS at 1440p, and 67 FPS at 4K. However, without minimum FPS data, it is unclear how well it holds up during intense scenes. The Ultra preset is the most demanding, with averages of 74 FPS at 1080p, 66 FPS at 1440p, and 56 FPS at 4K. The 4K Ultra result dips below 60 FPS, which may be noticeable in fast-paced action sequences. The Low preset offers the highest frame rates (153 FPS at 1080p, 137 FPS at 1440p, 116 FPS at 4K) but sacrifices visual fidelity.

For players with a 60 Hz monitor, the Medium preset at 4K is the recommended choice, as it maintains an average of 73 FPS and a minimum of 62 FPS. For those with a 144 Hz monitor at 1080p, the Medium preset at 96 FPS is a good compromise, though the Low preset at 153 FPS would take full advantage of the refresh rate. At 1440p, the Medium preset at 85 FPS is ideal for 75-100 Hz displays. The data suggests that the Medium preset provides the most consistent frame pacing, as evidenced by the recorded minimum and maximum values, making it the safest choice for a smooth experience without excessive visual compromise.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4060 is the primary determinant of frame rates in Overpower, as evidenced by the resolution scaling analysis. Its boost clock of 2460 MHz and base clock of 1830 MHz, combined with 3072 shading units, provide the raw compute power needed for the game’s rendering. The 8 GB of GDDR6 memory on a 128-bit bus delivers 272.0 GB/s of bandwidth, which is sufficient for the game’s textures and geometry at 1080p and 1440p, but becomes a limiting factor at 4K Ultra settings. The GPU has a PassMark G3D score of 19545, placing it in the 61st percentile of all GPUs.

The GPU’s nearest rivals in terms of aggregate score are the AMD Radeon HD 7790 (deltaPct -0.2), the AMD Radeon 780M (deltaPct 0.3), and the AMD Radeon Pro 560 (deltaPct 0.5). These are all parts with significantly lower memory bandwidth or older architectures, yet the RTX 4060 barely outperforms them in aggregate benchmarks. This is surprising given the RTX 4060’s Ada Lovelace architecture, which includes 24 RT cores and 96 tensor cores. However, the 128-bit memory bus is a significant bottleneck, as it limits the amount of data that can be transferred between the GPU and memory.

In Overpower, the GPU’s role is clear from the FPS scaling. The RTX 4060’s 8 GB VRAM is adequate for 1080p and 1440p, but at 4K Ultra, the game may be exceeding the VRAM capacity, causing the GPU to fall back to system memory, which results in the 56 FPS average. The GPU’s pixel rate of 118.1 GPixel/s and texture rate of 236.2 GTexel/s are modest figures that explain why the combo struggles to maintain 60 FPS at 4K Ultra. The 15.11 TFLOPS of FP32 compute is respectable, but it is not enough to overcome the memory bandwidth limitations. The GPU’s TDP of 115 W is low, indicating it is a power-efficient part, but this efficiency comes at the cost of raw performance. The RTX 4060 is marked as end-of-life, which means it is no longer in active production, and its successor, the GeForce 50 series, is already on the market.