Overpower

How This Combo Ranks

The pairing of the AMD Ryzen 5 5600G with the NVIDIA GeForce RTX 4090 lands at rank 97 out of 1744 tested combos in Overpower. That places it in the top 5.6% of all configurations, a strong showing for a system built around a mid-range APU. The data suggests this is a case where the sheer graphics horsepower of the RTX 4090 dominates the overall result, pulling the combo well above what the CPU's own benchmark percentile might suggest. The Ryzen 5 5600G sits at the 78th percentile among all CPUs, but the GPU's 91st percentile ranking and its massive average benchmark score of 66,473 are clearly the primary drivers of this combo's high placement.

The delta between the CPU's average benchmark score (19,983) and the GPU's (66,473) is striking, indicating a heavily GPU-bound configuration. When examining the CPU's nearest rivals, the data shows a razor-thin margin: the Intel Core i7-11600H is just 0.2% behind, while the AMD Ryzen Threadripper PRO 5995WX is 0.3% ahead. This clustering suggests that the CPU choice, within this performance tier, has minimal impact on the overall combo ranking. The GPU is doing almost all the heavy lifting. For Overpower, an action title, this means the experience is overwhelmingly dictated by the graphics card's capabilities.

GPU Role

The NVIDIA GeForce RTX 4090 is the undisputed centerpiece of this combo. Its 24 GB of GDDR6X memory on a 384-bit bus yields a bandwidth of 1.01 TB/s, a figure that ensures texture streaming and high-resolution assets are never bottlenecks. In Overpower, which is an action game with likely fast-moving scenes, this memory bandwidth is critical for maintaining frame pacing. The GPU's boost clock of 2520 MHz, built on the Ada Lovelace architecture with 16,384 shading units, produces an FP32 throughput of 82.58 TFLOPS. This raw compute power translates directly to the high average FPS numbers seen in the measured results.

The 128 RT cores and 512 tensor cores are present, but their specific impact on Overpower is not explicitly quantified in the measured data. However, the GPU's benchmark scores tell a story of dominance: a Passmark G3D score of 38,194 and a 3DMark Steel Nomad DX12 score of 9,223. The GPU's nearest rivals in the benchmark database are professional-grade cards like the NVIDIA Tesla T4 and AMD Radeon Pro Vega 56, with delta percentages of -0.4% and -0.9% respectively. This is notable because the RTX 4090, despite being a consumer gaming card, is benchmarked in the same league as workstation accelerators. For Overpower, this means the GPU has ample headroom to handle any graphical scenario the game presents, likely making it the limiting factor only at the highest settings and 4K resolution.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor from the 5000 series, based on the Zen 3 architecture and manufactured on a 7 nm process. Its base clock is 3.90 GHz with a boost of 4.40 GHz. In the context of this combo, the CPU's role is to feed the RTX 4090 without becoming a bottleneck. The data suggests it does this adequately, but with some interesting caveats. The CPU's 3DMark multi-threaded score of 5,451 and single-thread score of 872 indicate a balanced, if not top-tier, performer. Its Cinebench R23 multi-core score of 16,758 is respectable for a 6-core part.

The Ryzen 5 5600G's 16 MB of L3 cache and dual-channel DDR4 memory support (with 51.2 GB/s bandwidth) are modest by modern standards. However, the measured FPS results show that even at 1080p Low, the combo achieves 208.5 FPS, suggesting the CPU is keeping up with the GPU's output. The processor's average benchmark score of 19,983 places it in a tight cluster with its nearest rivals, all within 0.3% of each other. This indicates that the CPU is not a differentiator here; it is a competent mid-range part that does not hold back the RTX 4090 in Overpower. The 65W TDP is low for a desktop part, hinting that the 5600G is more about efficiency than extreme performance, yet it still manages to support the high frame rates seen in the data.

Measured FPS Breakdown

The measured FPS data for Overpower shows a clear hierarchy across resolutions and settings. At 1920x1080, the combo ranges from 141.7 FPS on Ultra to 208.5 FPS on Low. The Medium setting at 173.1 FPS and High at 171 FPS are nearly identical, suggesting a plateau where the CPU or game engine limits further gains. Moving to 2560x1440, the numbers shift down: Low yields 201 FPS, High 152.8 FPS, Medium 166.5 FPS, and Ultra 125.9 FPS. The gap between Low and Ultra at 1440p is 75.1 FPS, a substantial spread that highlights the GPU's workload scaling.

At 3840x2160, the RTX 4090 begins to show its limits. Ultra drops to 110.2 FPS, while High achieves 132.2 FPS. Medium is 144.7 FPS, and Low jumps to 189.3 FPS. The 4K Ultra result is the only measured point below 120 FPS, which is a key threshold for high-refresh-rate gaming. The data reveals that from 1080p Low to 4K Low, the FPS drops from 208.5 to 189.3, a decline of only 19.2 FPS. However, from 1080p Ultra to 4K Ultra, the drop is from 141.7 to 110.2, a loss of 31.5 FPS. This pattern indicates that the GPU is the primary scaling factor at higher settings, while the CPU's influence is more pronounced at lower resolutions.

FAQ

Q: What is the best resolution for this combo based on the measured data?

A: The data shows that 2560x1440 on High settings (152.8 FPS) offers a strong balance, but 1920x1080 on High (171 FPS) provides a higher frame rate. For 4K, High settings (132.2 FPS) are the highest playable option above 120 FPS.

Q: How does the CPU compare to its nearest rivals in benchmark scores?

A: The Ryzen 5 5600G has an average benchmark score of 19,983. It is 0.2% ahead of the Intel Core i7-11600H and 0.3% behind the AMD Ryzen Threadripper PRO 5995WX, indicating a very tight performance cluster.

Q: Is the GPU the limiting factor at 4K Ultra settings?

A: The data suggests yes. At 3840x2160 Ultra, the combo achieves 110.2 FPS, the lowest measured result. This indicates the RTX 4090 is being fully utilized, while the CPU still has headroom.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings produce 208.5 FPS, while Ultra produces 141.7 FPS. This is a difference of 66.8 FPS, showing a significant performance cost for maximum visual quality.

Q: How does the GPU's benchmark score compare to its nearest rivals?

A: The RTX 4090 has an average benchmark score of 66,473. It is 0.4% ahead of the NVIDIA Tesla T4 and 0.9% ahead of the AMD Radeon Pro Vega 56.

Q: Does the combo maintain playable frame rates at all tested settings?

A: Yes. The lowest measured result is 110.2 FPS at 4K Ultra, which is still above 60 FPS. All other settings and resolutions exceed 125 FPS, indicating a consistently smooth experience.

Settings Recommendations

The measured data points to Ultra settings as the optimal choice for the best experience, but with a caveat depending on resolution. At 1920x1080, Ultra yields 141.7 FPS, which is well above the 120 FPS threshold for high-refresh-rate monitors. This is the recommended setting for 1080p, as it delivers the full visual experience without sacrificing smoothness. At 2560x1440, Ultra drops to 125.9 FPS, still playable but closer to the edge. High settings at 1440p produce 152.8 FPS, which provides a more comfortable margin for competitive play.

For 3840x2160, the data suggests High settings (132.2 FPS) as the sweet spot. Ultra at 4K (110.2 FPS) is technically playable but falls below the 120 FPS mark that many action game players prefer. Medium at 4K (144.7 FPS) is an alternative for those prioritizing frame rate over visual fidelity. The Low presets, while offering the highest FPS (208.5 at 1080p, 201 at 1440p, 189.3 at 4K), are not recommended for a game of Overpower's genre, as the visual downgrade is substantial relative to the FPS gain. The data indicates that High or Ultra provides the best balance of image quality and performance, with the specific choice depending on the user's resolution and refresh rate priorities.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals interesting insights about the system's bottleneck. At Low settings, the drop from 1080p (208.5 FPS) to 4K (189.3 FPS) is only 9.2%, a remarkably small decrease. This suggests that at Low settings, the CPU is the primary limiter, as the GPU has enough headroom to handle the resolution increase without significant frame loss. The Ryzen 5 5600G's 6-core, 12-thread configuration is likely the ceiling here, capping performance around the 200 FPS mark regardless of resolution.

At Ultra settings, the pattern changes dramatically. The drop from 1080p (141.7 FPS) to 4K (110.2 FPS) is 22.2%, indicating that the GPU becomes the limiting factor as the resolution increases. The RTX 4090's workload scales with pixel count, and at 4K Ultra, it is being pushed to its limits. The Medium and High settings show intermediate scaling, with 1080p to 4K drops of 16.4% and 22.7% respectively. This data implies that for 1080p and 1440p gaming, the CPU is the constraining component, while at 4K, the GPU takes over as the primary bottleneck. For users aiming for maximum frame rates at lower resolutions, a stronger CPU would yield better results, but the current combo still delivers excellent performance across all tested configurations.