Fivem

The pairing of AMD’s Ryzen 5 5600G with NVIDIA’s GeForce RTX 4090 creates a striking contrast in raw capability, and the benchmark data for Fivem reveals just how that imbalance plays out. This is a configuration where the GPU is operating at an extreme performance tier while the CPU, a 6-core Zen 3 part, represents a more modest foundation. The measured frames per second across resolutions and settings tell a story of a game that scales heavily with graphical load, but also exposes the ceiling imposed by the processor.

Resolution Scaling

The data shows a clear and predictable pattern: as resolution increases, average frame rates drop substantially. At 1080p with Low settings, the combo achieves 279 FPS. Moving to 1440p Low, that figure falls to 242.4 FPS, a reduction of approximately 13%. At 4K Low, the average drops further to 136.2 FPS, which is about 44% lower than the 1440p result. This scaling suggests that even at lower graphical presets, the jump to 4K places a significant burden on the rendering pipeline.

The pattern shifts when examining higher settings. At Ultra settings, the 1080p average is 180.6 FPS. At 1440p Ultra, it drops to 119.3 FPS, and at 4K Ultra, it falls to 67.3 FPS. The relative drop from 1080p to 4K at Ultra is roughly 63%, which is steeper than the drop at Low settings (about 51% from 1080p to 4K). This steeper curve at higher settings indicates that the game becomes increasingly GPU-bound as both resolution and visual complexity rise. The RTX 4090’s immense compute resources are being taxed more heavily when processing the additional pixels and effects.

The data implies that the limiting component changes depending on the resolution. At 1080p Low, the 279 FPS result suggests the CPU is the primary bottleneck, as the GPU has ample headroom to render frames that quickly. The Ryzen 5 5600G’s 6 cores and 12 threads are likely keeping up with the game’s simulation and draw calls, but they cannot push the frame rate higher. Conversely, at 4K Ultra, the 67.3 FPS figure points to the GPU being the constraining factor, as the sheer pixel count and settings demand more from the RTX 4090. The transition between these bottlenecks is visible in the data, with 1440p serving as a middle ground where the balance shifts.

FAQ

Q: How does the RTX 4090’s performance in Fivem compare to its closest rivals?

A: The RTX 4090 has an average benchmark score of 66,473. Its nearest rival, the NVIDIA Tesla T4, scores 66,733, which is a delta of -0.4%, meaning the 4090 is slightly behind. Against the AMD Radeon Pro Vega 56, which scores 67,097, the 4090 trails by -0.9%. The data shows the 4090 holds its own among these high-end compute cards, though the differences are minimal.

Q: What is the best frame rate achieved with this combo?

A: The highest average FPS recorded in the measured data is 279, achieved at 1920x1080 with Low settings. This is the only result in the pack that approaches the 300 FPS mark, indicating that the combination is most effective at delivering extreme frame rates only at the lowest resolution and preset.

Q: Does the Ryzen 5 5600G’s integrated graphics affect the results?

A: The CPU includes Radeon Vega 7 integrated graphics, but the measured FPS data is for the discrete RTX 4090. The integrated graphics are not the active rendering device in these tests, and its presence does not appear to influence the frame rates, which are driven by the dedicated GPU and the CPU’s processing power.

Q: How does the combo rank among all tested configurations for Fivem?

A: The combination of the Ryzen 5 5600G and RTX 4090 ranks 79th out of 1,792 tested combos in Fivem. This places it in the top 5% of all tested pairings, which is a strong showing given the CPU’s mid-range positioning.

Q: What is the frame rate difference between 1080p and 4K at High settings?

A: At 1080p High, the average FPS is 232. At 4K High, the average drops to 84.7 FPS. This represents a reduction of approximately 63%, showing that the game’s visual fidelity at High settings significantly impacts performance as resolution scales.

Q: Is the RTX 4090’s memory bandwidth a factor in these results?

A: The GPU features 24 GB of GDDR6X memory with a 384-bit bus and a bandwidth of 1.01 TB/s. This substantial bandwidth likely helps maintain stable frame rates at 4K, where large textures and data transfers are common. The measured 4K results, while lower than 1080p, remain playable, suggesting the memory subsystem is not a limiting factor.

GPU Role

The NVIDIA GeForce RTX 4090 is the dominant component in this pairing, and its specifications explain the high frame rates observed. It uses the AD102 chip on a 5 nm process, with a base clock of 2235 MHz and a boost clock of 2520 MHz. The 24 GB of GDDR6X memory operates at 1313 MHz with a 21 Gbps effective speed, providing the bandwidth needed for high-resolution textures. The GPU’s 16,384 shading units and 512 texture mapping units are substantial, yet the data shows that the card’s performance in Fivem is not always fully utilized.

At 1080p Low, the average FPS is 279, which is high but not exceptional for this GPU. The RTX 4090 is capable of far more in less demanding titles, but the game’s engine and CPU limitations cap the output. The percentile ranking for the GPU is 91, meaning it performs better than 91% of all GPUs in the database. However, in this specific game, the card’s raw power is not the sole determinant of performance.

The clock speeds are noteworthy. The boost clock of 2520 MHz is relatively high, and the data suggests that the card can sustain high performance under load. The frame rates at 1440p and 4K, while lower, are still impressive for a multiplayer title. At 1440p High, the average is 150.2 FPS, and at 4K High, it is 84.7 FPS. These figures indicate that the GPU is working harder at higher resolutions, but it never becomes a severe bottleneck at the tested settings. The RTX 4090’s role is to provide the graphical headroom, while the CPU determines the upper limit at lower resolutions.

Measured FPS Breakdown

The data provides 12 distinct measurements across three resolutions and four settings. At 1920x1080, the Low preset yields the highest average at 279 FPS, followed by Medium at 256.8 FPS, High at 232 FPS, and Ultra at 180.6 FPS. The gap between Low and Ultra is 98.4 FPS, showing a significant performance cost for maximum visual quality at this resolution.

At 2560x1440, the averages are 242.4 FPS for Low, 192 FPS for Medium, 150.2 FPS for High, and 119.3 FPS for Ultra. The difference from Low to Ultra is 123.1 FPS, which is a larger absolute drop than at 1080p. This suggests that the 1440p resolution amplifies the impact of the settings, as the GPU has to render more pixels alongside increased effects.

At 3840x2160, the averages are 136.2 FPS for Low, 108.5 FPS for Medium, 84.7 FPS for High, and 67.3 FPS for Ultra. The spread from Low to Ultra is 68.9 FPS. Notably, the relative performance hit from Low to Ultra is about 51% at 4K, which is less steep than at 1440p (51% as well) but more than at 1080p (35%). This indicates that at 4K, the GPU is the primary constraint, and the settings have a more proportional impact on frame rate.

The data shows a consistent trend: higher settings always reduce performance, and higher resolutions always reduce performance. The combination of 1080p Low provides the best frame rate, while 4K Ultra provides the lowest. None of the results show a min or max FPS, so the analysis is based solely on averages.

How This Combo Ranks

The combo’s rank in Fivem is 79th out of 1,792 tested combinations. This places it in the top 4.4% of all pairings, which is a strong performance. However, the interpretation of this rank requires context. The RTX 4090 is a top-tier GPU, but the Ryzen 5 5600G is a mid-range processor. The fact that this combo still ranks highly suggests that Fivem is not excessively CPU-bound, or that the GPU’s capabilities compensate for the CPU’s limitations.

The rank can be compared to the CPU’s standalone performance. The Ryzen 5 5600G has a percentile of 78 against all CPUs, and its nearest rival, the Intel Core i7-11600H, scores 19,949, which is a delta of 0.2% from the 5600G’s 19,983. This close competition indicates the CPU is average in the broader market. Yet, the combo’s rank of 79 out of 1,792 shows that the pairing performs well above average in this specific game. The data implies that the RTX 4090 boosts the overall experience, even with a less powerful CPU.

The GPU’s percentile is 91, and its nearest rival, the NVIDIA Tesla T4, scores 66,733, a delta of -0.4%. This confirms the GPU’s high standing. The combination of a high-ranking GPU and a mid-ranking CPU results in a top-100 combo, which suggests that the game’s performance is more dependent on the GPU than the CPU.

Settings Recommendations

Based on the measured FPS, the optimal settings depend on the user’s priority: maximum frame rate or maximum visual fidelity. For competitive play, where high FPS is crucial, the 1080p Low setting with 279 FPS is the clear choice. The 1440p Low setting at 242.4 FPS is also viable for those wanting a higher resolution without sacrificing too much speed.

For a balanced experience, the Medium preset offers a good compromise. At 1080p, it provides 256.8 FPS, and at 1440p, 192 FPS. These are both excellent frame rates that maintain smooth gameplay while offering better visual quality than Low. The 4K Medium setting at 108.5 FPS is also playable and provides a significant visual upgrade over lower resolutions.

For those prioritizing visual quality, the High preset is recommended. At 1080p, it delivers 232 FPS, and at 1440p, 150.2 FPS. The 4K High setting at 84.7 FPS is the lowest of the High results but is still above 60 FPS, which is playable for most users. The Ultra preset is the most demanding, with 180.6 FPS at 1080p, 119.3 FPS at 1440p, and 67.3 FPS at 4K. These are all playable, but the jump from High to Ultra offers diminishing returns for the performance cost. The data suggests that High at 1440p provides the best balance of visual quality and frame rate, while Low at 1080p is best for maximum FPS.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. It has a 16 MB L3 cache and supports DDR4 memory with a dual-channel bus. These specifications position it as a capable mainstream CPU, but not a high-end one. The benchmark data shows its multi-threaded performance is moderate, with a Cinebench R23 multi-core score of 16,758 and a single-core score of 2,365.

In Fivem, the CPU’s role is evident in the 1080p results. At 1080p Low, the 279 FPS average is likely near the CPU’s limit. The game’s multiplayer nature often requires more CPU resources for player positions and network data, and the 6 cores may be a limiting factor. The high frame rates at 1080p Medium (256.8 FPS) and High (232 FPS) also suggest the CPU is keeping up, but the lower scores at 4K indicate the GPU is taking over as the bottleneck.

The CPU’s nearest rivals in the database include the Intel Core i7-11600H and the AMD EPYC 7713P, with delta percentages of 0.2% and -0.2%, respectively. This close grouping indicates that the 5600G’s performance is comparable to other mid-range and high-end server chips in synthetic benchmarks. However, in gaming, the single-thread performance is often more critical, and the 5600G’s 3dmark single-thread score of 872 suggests it has decent per-core capability.

The data implies that the CPU is not the primary constraint in Fivem at higher resolutions, but it does cap the frame rate at 1080p. The measured 4K results, which are lower, are more influenced by the GPU. For this combo, the CPU provides adequate support for the RTX 4090, but a more powerful processor could potentially push the 1080p frame rates even higher. The Ryzen 5 5600G’s 65 W TDP and AM4 socket make it a practical choice, but its role is to supply the game’s logic, not to drive the rendering.