Overpower
This combination offers playable performance with an average of 37 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 27 | 29 | 47 |
| 1440p QHD | 27 | 32 | 35 | 55 |
| 1080p Full HD | 30 | 36 | 39 | 62 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 5500X3D + AMD Radeon RX 570, In-Depth Analysis
The AMD Ryzen 5 5500X3D paired with the AMD Radeon RX 570 is a combination defined by a stark contrast in generational capability. The CPU is a modern 7 nm Zen 3 part with a large 96 MB shared L3 cache, while the GPU is a 14 nm Polaris 20 chip from 2017. In the action title Overpower, this pairing produces a predictable bottleneck: the graphics card is the primary constraint across all tested resolutions, though the CPU’s headroom ensures frame rates are stable and consistent with the GPU’s output limits.
Resolution Scaling
The measured FPS data reveals a clear and expected pattern of performance degradation as resolution increases. At 1080p with Low settings, the combo achieves an average of 62 FPS. Moving to 1440p Low drops the average to 55 FPS, a reduction of 7 frames. At 4K Low, the average falls further to 47 FPS. This scaling indicates that even at the lowest settings, the GPU is the limiting factor; the 11.3% performance hit from 1080p to 1440p and the 24.2% hit from 1080p to 4K are substantial, but they are not catastrophic collapses, suggesting the RX 570’s 4 GB frame buffer and 224.0 GB/s memory bandwidth are being taxed heavily rather than overwhelmed instantly.
The scaling becomes more punishing at higher visual presets. With High settings, the averages are 36 FPS at 1080p, 32 FPS at 1440p, and 27 FPS at 4K. The delta between 1080p and 1440p is 4 FPS, but the drop from 1080p to 4K is 9 FPS, or 25%. This steeper curve at higher settings points to the GPU’s compute resources—specifically its 5.095 TFLOPS of FP32 performance—being saturated. The RX 570’s 32 ROPs are also likely a limiting factor for pixel throughput at 4K, where the pixel rate of 39.81 GPixel/s is insufficient to maintain fluid motion.
At Medium settings, the measured lows and highs provide additional insight into the scaling behavior. At 1080p Medium, the average is 39 FPS with a minimum of 33 and a maximum of 45. At 1440p Medium, the average drops to 35 FPS with a minimum of 29 and a maximum of 40. At 4K Medium, the average is 29 FPS with a minimum of 25 and a maximum of 34. The variance between the minimum and maximum frames remains relatively tight across resolutions, which indicates that the GPU is delivering consistent frame pacing rather than stuttering. However, the absolute values show that 4K Medium is barely playable, while 1080p Medium is borderline acceptable.
The 4K Ultra setting yields an average of 23 FPS, which is the lowest recorded score in the entire dataset. This represents a 23% drop from 4K High and a 63% drop from 1080p Low. The data strongly suggests that 4K is not a viable target for this combo, regardless of settings, as the GPU lacks the raw fill rate and memory bandwidth to handle the pixel count. The limiting component is definitively the GPU, as the CPU’s performance metrics—a Passmark multithread score of 20363 and a single-thread score of 2941—are far above what is needed to drive a GPU that caps out around 62 FPS at its best case scenario.
How This Combo Ranks
In the broader context of all tested system combinations for Overpower, this pairing sits near the bottom. The comboRankInGame data places this specific configuration at rank 2866 out of 2980 total combos. This percentile placement, roughly in the bottom 4% of all tested systems, underscores that while the components are functional, their combined output is far below the median performance level. The rank is primarily dragged down by the GPU’s age and capabilities, as the CPU is a much stronger performer relative to its peers.
The CPU’s individual standing is far more respectable. The AMD Ryzen 5 5500X3D has an average benchmark score of 37018, which places it in the 85th percentile of all CPUs tested. Its nearest rivals include the AMD Ryzen 5 5600F, which scores 36945 (a delta of 0.2% faster), and the Intel Core Ultra 5 225, which scores 36938 (a delta of 0.2% faster). The Ryzen AI 7 PRO 450 scores 37093 (-0.2% delta), and the Intel Core i9-12900T scores 37112 (-0.3% delta). These deltas are minuscule, indicating that the 5500X3D is statistically tied with a cluster of mid-range and older high-end processors. The CPU is not the bottleneck; it is performing at a level consistent with modern desktop parts.
Conversely, the GPU’s individual rank is also low, but not as catastrophic as the combo rank might suggest. The AMD Radeon RX 570 has an average benchmark score of 28766, placing it in the 74th percentile of all GPUs. Its nearest rivals are the AMD Radeon RX 6800M (28874, -0.4% delta), the AMD Radeon R9 M295X (28580, 0.7% delta), the AMD Radeon RX 470 (28996, -0.8% delta), and the NVIDIA Quadro RTX 8000 (28421, 1.2% delta). The RX 570 is essentially on par with its direct predecessor, the RX 470, and a mobile flagship from the same era. The fact that it trades blows with a Quadro RTX 8000, a professional card, highlights its mid-range positioning. The combination of a 85th percentile CPU with a 74th percentile GPU produces a system that is severely imbalanced for a demanding action game, resulting in the low overall combo rank.
GPU Role
The AMD Radeon RX 570 is the decisive factor in this duo’s performance. Its specifications are modest by modern standards: 4 GB of GDDR5 memory on a 256-bit bus, a base clock of 1168 MHz, and a boost clock of 1244 MHz. The memory operates at 1750 MHz, yielding 7 Gbps effective and a bandwidth of 224.0 GB/s. This memory configuration is the primary suspect for the performance ceiling at 4K, as the 4 GB capacity is likely exceeded by the texture and geometry data required at that resolution, forcing the system to rely on slower fallback paths.
The GPU’s compute capabilities are equally constrained. With 2048 shading units, 128 TMUs, and 32 ROPs, the RX 570 is built for 1080p gaming from its 2017 release. Its FP32 performance of 5.095 TFLOPS is adequate for older titles but insufficient for the demands of Overpower, which was released in 2023. The texture rate of 159.2 GTexel/s and pixel rate of 39.81 GPixel/s are the theoretical limits that dictate the measured frame rates. The data confirms this: at 1080p Low, the combo hits 62 FPS, which is likely near the GPU’s maximum output. At 4K Ultra, the 23 FPS average is a direct result of the ROPs being unable to process the 8.3 million pixels per frame in real time.
The GPU’s API support includes DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3, which means it can technically run modern rendering paths. However, the GCN 4.0 architecture lacks the dedicated hardware features found in newer cards, such as ray tracing cores, which are null in the specifications. The measured FPS data does not include ray tracing scenarios, so the impact is unquantified, but the absence of such hardware places the GPU at a disadvantage for any future content that leverages those features. The 150 W TDP and 450 W suggested PSU indicate that power delivery is not a limiting factor for this card, but the PCIe 3.0 x16 interface could theoretically reduce bandwidth compared to newer PCIe 4.0 slots, though the CPU supports Gen 4, the GPU does not.
The GPU’s benchmark scores in synthetic tests—3DMark Steel Nomad DX12 at 880, Geekbench Metal at 39349, OpenCL at 32084, and Vulkan at 42752—are consistent with its 74th percentile rank. These scores reflect a GPU that is capable of running esports and older AAA titles smoothly but struggles with modern, graphically intensive games like Overpower. The 4 GB frame buffer is the single most critical weakness, as it caps texture quality and resolution scaling, which the measured FPS data corroborates.
Measured FPS Breakdown
The dataset provides twelve distinct data points, covering three resolutions and four settings presets. The results are presented below in a structured format to highlight the exact performance deltas.
At 1920x1080, the combo delivers its best performance. Low settings yield an average of 62 FPS, which is the highest average in the entire dataset. Medium settings drop to 39 FPS, with a minimum of 33 and a maximum of 45. High settings yield 36 FPS. Ultra settings produce the lowest 1080p result at 30 FPS. The spread from Low to Ultra is 32 FPS, indicating that the GPU has headroom at lower presets but becomes saturated as shader complexity increases.
At 2560x1440, the averages shift downward. Low settings produce 55 FPS, a 7 FPS drop from 1080p. Medium settings yield 35 FPS (min 29, max 40), which is only 4 FPS lower than 1080p Medium. High settings produce 32 FPS. Ultra settings yield 27 FPS. The relative consistency between Medium and High at this resolution suggests that the pixel fill rate is becoming the bottleneck, as the additional shader work from High settings does not significantly impact the frame rate.
At 3840x2160, the performance collapses to sub-30 FPS territory across most presets. Low settings yield 47 FPS, which is still playable but represents a 24% drop from 1080p Low. Medium settings produce 29 FPS (min 25, max 34). High settings yield 27 FPS. Ultra settings produce 23 FPS. The 4K data shows a compression of the settings scaling: the difference between Low and Ultra is only 24 FPS, compared to 32 FPS at 1080p. This indicates that at 4K, the GPU is entirely bound by its memory bandwidth and ROP throughput, and the shader settings have diminishing returns because the card cannot process the pixels fast enough.
The measured FPS data also reveals that the minimum frame rates, where recorded, are not drastically lower than the averages. At 1080p Medium, the minimum is 33 FPS against a 39 FPS average (a 15% deviation). At 4K Medium, the minimum is 25 FPS against a 29 FPS average (a 14% deviation). This tight grouping suggests that the GPU does not suffer from severe stuttering or frame-time spikes in the tested scenarios, which is a positive indicator for gameplay fluidity despite the low absolute numbers.
Settings Recommendations
Based strictly on the measured FPS rows, the optimal experience for this combo is at 1920x1080 with Low settings. This configuration achieves an average of 62 FPS, which is the only preset in the dataset that reaches the 60 FPS threshold typically considered smooth for action games. While Medium settings at 1080p provide a higher visual fidelity with a 39 FPS average, the drop below 40 FPS introduces perceptible judder in fast-paced action sequences. The data suggests that the 33 FPS minimum at 1080p Medium could result in noticeable hitches during intense combat.
For users who prioritize visual quality over frame rate, 1080p High offers a 36 FPS average, which is a marginal 3 FPS improvement over Medium. The jump from Medium to High provides diminishing returns, as the GPU is already saturated. Ultra settings at 1080p yield only 30 FPS, which is not recommended due to the sub-30 FPS minimum likely occurring during heavy scenes.
At 1440p, the only viable option is Low settings, which produces a 55 FPS average. This is a compromise, as the resolution increase does not offset the visual quality loss from Low presets. Medium settings at 1440p drop to 35 FPS, which is below the playability threshold for a fast action game. High and Ultra at 1440p are not recommended, as they fall into the 27-32 FPS range, which is borderline unplayable.
At 4K, the data clearly indicates that this combo should not be used. The best 4K result is 47 FPS at Low settings, which is playable but visually poor. However, the 4K Medium result of 29 FPS and the 4K High result of 27 FPS are below acceptable standards. The 4K Ultra result of 23 FPS is a slideshow. The recommendation is to avoid 4K entirely with this GPU, as the frame rates do not provide a consistent experience. The optimal balance of visual fidelity and performance is achieved at 1080p Low, with 1080p Medium as a secondary option for users who can tolerate frame rates in the high 30s.
CPU Role
The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture (Vermeer). It operates at a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 105 W TDP. The CPU’s defining feature is its 96 MB shared L3 cache, which is significantly larger than typical desktop processors. This cache configuration is designed to reduce memory latency and improve gaming performance, particularly in titles that are sensitive to cache hits.
In the context of Overpower, the CPU’s role is secondary to the GPU. The measured FPS data shows that the GPU is the bottleneck at all resolutions, as the frame rates are consistently low even with a powerful CPU. The CPU’s Passmark single-thread score of 2941 and multithread score of 20363 are strong, placing it in the 85th percentile of all CPUs. Its nearest rivals, such as the Intel Core i9-12900T and AMD Ryzen 5 5600F, have nearly identical average scores (37112 and 36945, respectively), with deltas of less than 0.3%. This indicates that the 5500X3D is not holding back the system in any measurable way.
The CPU’s memory support includes DDR4 with a dual-channel bus and a bandwidth of 51.2 GB/s. This is a potential limitation for the system as a whole, but it does not affect the game’s performance because the GPU is the limiting factor. The CPU also supports PCIe Gen 4 with 20 lanes, but the RX 570 is a PCIe 3.0 x16 card, so the interface bandwidth is capped at the older standard. This mismatch does not appear to cause a significant performance penalty, as the measured FPS at 1080p Low (62 FPS) is consistent with the GPU’s expected output.
The CPU’s benchmark scores in specific tests, such as Passmark data compression (230392), integer math (60033), and floating point math (34511), show a well-rounded processor that excels at both integer and floating-point workloads. The extended instructions score of 15925 and physics score of 2282 further confirm its capability for gaming physics calculations. However, in Overpower, the CPU’s workload is minimal because the GPU is unable to feed frames fast enough to stress the CPU. The data shows that even at 1080p Low, where the GPU is most efficient, the frame rate is only 62 FPS, which is well below the CPU’s capacity to generate frames.
In summary, the Ryzen 5 5500X3D is a high-performing CPU that is wasted in this configuration. Its 96 MB L3 cache and 6 cores provide ample headroom for more powerful GPUs. In this pairing, the CPU sits idle while the GPU struggles to maintain playable frame rates. The combination’s low combo rank of 2866 out of 2980 is almost entirely attributable to the GPU’s age and limitations, not the CPU. For users looking to upgrade, the data suggests that the RX 570 is the primary bottleneck and should be replaced first to unlock the CPU’s full potential.
Hardware Specifications
AMD Ryzen 5 5500X3D
AMD Radeon RX 570
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500X3D + AMD Radeon RX 570 in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 47.0 |
| 3840x2160 | Medium | 29.0 |
| 3840x2160 | High | 27.0 |
| 3840x2160 | Ultra | 23.0 |
| 2560x1440 | Low | 55.0 |
| 2560x1440 | Medium | 35.0 |
| 2560x1440 | High | 32.0 |
| 2560x1440 | Ultra | 27.0 |
| 1920x1080 | Low | 62.0 |
| 1920x1080 | Medium | 39.0 |
| 1920x1080 | High | 36.0 |
| 1920x1080 | Ultra | 30.0 |
Overpower with Ryzen 5 5500X3D + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RX 570 + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 5500X3D + RX 570
Explore FPS benchmarks for other games using this same hardware combination.