Overpower
This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 47 | 57 | 60 | 100 |
| 1440p QHD | 56 | 68 | 74 | 116 |
| 1080p Full HD | 60 | 77 | 83 | 129 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
The AMD Ryzen 5 4600G and NVIDIA GeForce RTX 3060 Ti combo ranks 1202 out of 1744 tested combinations in Overpower. That places it in the lower third of all pairings, which is a significant gap from the top of the charts. The data indicates this is a pairing where the CPU is the primary constraint, holding back a capable GPU from achieving higher framerates in this specific title. For context, the RTX 3060 Ti sits at the 69th percentile among all GPUs, while the Ryzen 5 4600G is at the 75th percentile among CPUs, so both components are mid-pack performers on their own, but their combined results in Overpower are less than the sum of their parts.
How This Combo Ranks
The combo rank of 1202 out of 1744 puts this pairing in the 31st percentile of all tested configurations. This is a modest result, suggesting that while the system is functional, it does not excel in Overpower. The CPU’s average benchmark score of 17489 is nearly identical to its nearest rivals, with the AMD Ryzen 3 PRO 5355GE at 17482 (0% delta) and the Intel Core i5-12450H at 17475 (0.1% delta). The Intel Core i3-14100T and i3-13100F are slightly ahead with scores of 17636 and 17665, respectively, representing deltas of -0.8% and -1% from the 4600G. This shows the 4600G is squarely in the middle of its performance class, with no significant advantage over similarly priced alternatives. The GPU’s average benchmark score of 25120 places it just behind the AMD Radeon RX 6700M (25180, -0.2% delta) and the AMD Radeon RX 6600 (25235, -0.5% delta). The data suggests that neither component is a standout performer, and their combined ranking reflects a balanced but unremarkable system.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with the GA104 chip, fabricated on Samsung’s 8 nm process. It features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. The memory clock runs at 1750 MHz, with an effective data rate of 14 Gbps. The GPU’s base clock is 1410 MHz, boosting to 1665 MHz. With 4864 shading units, 152 TMUs, and 80 ROPs, the card delivers 16.20 TFLOPS of FP32 performance. It also includes 38 RT cores and 152 tensor cores, supporting DirectX 12 Ultimate, Vulkan 1.4, and OpenGL 4.6. In Overpower, the GPU’s role is clear when examining the measured FPS across resolutions. At 4K Ultra, the card manages 47.3 FPS, which drops to 57.4 FPS at High settings. The jump to Medium yields 59.7 FPS, and Low settings dramatically improve performance to 99.9 FPS. This pattern shows the GPU is capable of high framerates at lower settings, but struggles to maintain playable performance at maximum quality in 4K. The 8 GB VRAM is sufficient for this game at 1080p and 1440p, but the data suggests it may be a limiting factor at 4K Ultra where the framerate dips below 50 FPS.
Settings Recommendations
Based on the measured FPS rows, the optimal experience balances smoothness with visual fidelity. At 1080p, the High preset delivers 77.4 FPS, which is playable, but the Medium preset at 83.1 FPS offers a slight improvement without a meaningful visual sacrifice. The Low preset at 129.1 FPS is exceptionally smooth, but it likely degrades the visual experience too much for a game of this genre. For 1440p, the High preset at 68 FPS is the best choice, as it stays above the 60 FPS threshold while maintaining decent quality. The Ultra preset at 56.1 FPS is borderline, and the Medium preset at 74.1 FPS is a safer bet if you prefer higher framerates. At 4K, the data shows that High settings at 57.4 FPS is the only preset that approaches playability, but it is still below 60 FPS. The Medium preset at 59.7 FPS is nearly identical, while Low at 99.9 FPS is the only way to get a truly smooth experience at this resolution. The Ultra preset at 47.3 FPS is not recommended. The sweet spot for this combo is 1440p High, offering a solid 68 FPS with good image quality. If you prioritize framerate, 1080p Medium at 83.1 FPS is the best balance.
Measured FPS Breakdown
The measured FPS data shows a clear hierarchy across resolutions and settings. At 1080p, the Low preset achieves 129.1 FPS, which is the highest framerate recorded for this combo. Medium drops to 83.1 FPS, High to 77.4 FPS, and Ultra to 60.3 FPS. The gap between Low and Medium is 46 FPS, indicating a significant performance cost for the first step up in quality. The difference between Medium and High is only 5.7 FPS, while High to Ultra is a 17.1 FPS drop. Moving to 1440p, the Low preset hits 116.2 FPS, which is still very playable. Medium delivers 74.1 FPS, High 68 FPS, and Ultra 56.1 FPS. The scaling from 1080p to 1440p is consistent, with an average drop of about 10-15% across all settings. At 4K, the Low preset manages 99.9 FPS, which is surprisingly high, but Medium drops to 59.7 FPS, High to 57.4 FPS, and Ultra to 47.3 FPS. The 4K Ultra result is the lowest in the entire dataset, and it represents a 21.6% drop from the 1080p Ultra score of 60.3 FPS. The data indicates that this combo is best suited for 1080p and 1440p gaming, with 4K only viable at Low settings.
Resolution Scaling
The FPS drop from 1080p to 4K reveals the bottleneck in this system. At Low settings, the framerate goes from 129.1 FPS at 1080p to 116.2 FPS at 1440p and 99.9 FPS at 4K. This is a 22.6% reduction from 1080p to 4K, which is relatively modest and suggests the GPU is not fully saturated at lower settings. However, at Ultra settings, the framerate drops from 60.3 FPS at 1080p to 56.1 FPS at 1440p and 47.3 FPS at 4K, a 21.6% drop from 1080p to 4K. The scaling is more pronounced at higher settings, indicating that the GPU is being pushed harder. The data shows that the CPU is the limiting factor at 1080p, as the framerate does not scale as expected with resolution. At 1080p Low, the 129.1 FPS is likely CPU-bound, as the GPU has headroom to render more frames. When resolution increases, the GPU becomes more utilized, but the CPU still holds back the system from reaching its full potential. This is evidenced by the relatively small FPS drops at Low settings, which would be much larger if the GPU were the primary bottleneck. The 4600G’s 6 cores and 12 threads, with a base clock of 3.70 GHz and boost clock of 4.20 GHz, are sufficient for this game, but the Zen 2 architecture and 8 MB of shared L3 cache limit its ability to feed the RTX 3060 Ti at higher framerates.
CPU Role
The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture, codenamed Renoir, on the 7 nm TSMC process. It has a base clock of 3.70 GHz and a boost clock of 4.20 GHz, with a TDP of 65 W. The cache configuration includes 64 KB of L1 per core, 512 KB of L2 per core, and 8 MB of shared L3 cache. In synthetic benchmarks, the CPU scores 13593 in Cinebench R23 multi-core and 1919 in single-core. Its Geekbench scores are 6093 multi-core and 1575 single-core. In PassMark, it achieves 15992 in multi-thread and 2653 in single-thread. These scores place it at the 75th percentile among all CPUs, with an average benchmark score of 17489. In Overpower, the CPU’s role is evident from the framerate data. At 1080p Low, the 129.1 FPS is likely near the CPU’s limit, and the GPU is not the bottleneck. The fact that 1440p Low only drops to 116.2 FPS, a 10% reduction, confirms that the CPU is still keeping up, but the GPU is starting to become more relevant. The 4600G’s single-thread performance, with a 3DMark single-thread score of 726, is adequate for this game, but the overall system is held back by the CPU’s lack of raw processing power compared to newer architectures. The data shows that pairing this CPU with a more powerful GPU would not yield significant gains in Overpower, as the 4600G is the limiting factor in most scenarios. The 8 MB of L3 cache is modest, and the PCIe Gen 3 interface, while functional, reduces bandwidth compared to newer platforms. This combo is a viable budget option, but the data clearly shows that the CPU is the weak link in Overpower, and upgrading it would provide a more substantial performance boost than upgrading the GPU.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3060 Ti in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 99.9 |
| 3840x2160 | Medium | 59.7 |
| 3840x2160 | High | 57.4 |
| 3840x2160 | Ultra | 47.3 |
| 2560x1440 | Low | 116.2 |
| 2560x1440 | Medium | 74.1 |
| 2560x1440 | High | 68.0 |
| 2560x1440 | Ultra | 56.1 |
| 1920x1080 | Low | 129.1 |
| 1920x1080 | Medium | 83.1 |
| 1920x1080 | High | 77.4 |
| 1920x1080 | Ultra | 60.3 |
Overpower with Ryzen 5 4600G + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RTX 3060 Ti + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.