Overpower

Overpower presents a clear performance hierarchy for the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 2070 SUPER combination. The data indicates that the RTX 2070 SUPER is the decisive component at higher resolutions, while the Ryzen 5 4600G provides sufficient headroom to keep frame rates playable across the board. The measured results show a consistent pattern where the GPU’s capabilities become the primary constraint as resolution increases, but the CPU never becomes a bottleneck that would make the experience unplayable at any tested setting.

Resolution Scaling

The transition from 1080p to 4K reveals a predictable and significant drop in average frame rates across all settings, but the magnitude of that drop varies depending on the preset. At Low settings, the average FPS falls from 143 at 1920x1080 to 127 at 2560x1440, and then to 108 at 3840x2160. This represents a 24.5% reduction from 1080p to 4K, which is substantial but still leaves the game highly playable at over 100 FPS on a 4K display. The scaling suggests that at Low settings, the GPU is still managing the workload efficiently, though the 4K resolution demands roughly 33% more pixel throughput than 1440p.

Moving to Medium settings, the average FPS drops from 89 at 1080p to 79 at 1440p, and then to 68 at 4K. The percentage decrease from 1080p to 4K here is 23.6%, which is very close to the Low setting drop. This consistency indicates that the RTX 2070 SUPER’s 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are handling the increased resolution demands without a sudden cliff in performance. The minimum FPS at Medium also shows a similar pattern, with 76 at 1080p, 67 at 1440p, and 57 at 4K, maintaining a playable floor even at the highest resolution.

High settings tell a similar story, with average FPS of 83 at 1080p, 74 at 1440p, and 63 at 4K. The drop from 1080p to 4K is 24.1%, again in line with the other presets. This uniform scaling across Low, Medium, and High suggests that the limiting factor is primarily the GPU’s raw rendering throughput rather than any specific memory or bandwidth constraint. The RTX 2070 SUPER’s boost clock of 1770 MHz and its 2560 shading units are being pushed progressively harder as resolution climbs.

Ultra settings exhibit the steepest relative decline. At 1080p, the average FPS is 69, which drops to 61 at 1440p, and then to 52 at 4K. The 1080p to 4K reduction is 24.6%, which is slightly higher than the other presets. This indicates that at Ultra, the combination of higher resolution and more demanding effects begins to strain the GPU more noticeably. The 52 FPS average at 4K Ultra is the lowest recorded figure in the entire dataset, yet it remains above the generally accepted threshold for playability, suggesting that the RTX 2070 SUPER can still deliver a smooth experience even under maximum load at 4K.

The data overall points to a GPU-bound scenario. The consistent percentage drops across all settings indicate that the CPU is not becoming a limiting factor as resolution increases. If the Ryzen 5 4600G were the bottleneck, we would expect the FPS to remain relatively flat across resolutions, but instead the scores scale downward in a predictable manner. This suggests that the 6-core, 12-thread processor with a boost clock of 4.20 GHz has enough headroom to feed the GPU adequately at all tested resolutions.

Settings Recommendations

The measured rows provide clear guidance on which preset offers the best experience, and the answer depends on the target resolution. At 1920x1080, High settings deliver an average of 83 FPS, which is a smooth experience for most players. However, Low settings offer 143 FPS, which is a 72% improvement over High and could be preferable for competitive play where high refresh rates matter more than visual fidelity. Medium settings at 89 FPS represent a middle ground, but the jump from Medium to High only costs 6 FPS on average, making High the better choice for visual quality without a significant performance penalty.

At 2560x1440, the picture shifts slightly. High settings produce 74 FPS, which is still smooth, but Low settings at 127 FPS provide a strong margin for high-refresh-rate monitors. Medium at 79 FPS is only 5 FPS above High, so the additional visual detail of High is essentially free. Ultra at 61 FPS is playable but begins to approach the lower bound of what is comfortable for fast-paced action games. For most users at 1440p, High settings represent the optimal balance, as they provide a 74 FPS average with the visual benefits of the preset.

At 3840x2160, the recommendations change dramatically. High settings yield 63 FPS, which is playable but not ideal for demanding scenes. Medium settings at 68 FPS offer a slight improvement, but the difference is minimal. Low settings at 108 FPS are the clear winner for 4K gaming, providing a 71% improvement over High while maintaining a frame rate that exceeds most 60 Hz displays. Ultra at 52 FPS is the only preset that dips below the 60 FPS mark, making it the least desirable choice for 4K.

Considering the full dataset, the best experience across all resolutions is achieved with High settings at 1080p and 1440p, and Low settings at 4K. The High preset at 1080p and 1440p offers a strong balance of visual quality and performance, with average FPS of 83 and 74 respectively. At 4K, the Low preset is the only option that guarantees a consistently high frame rate, with an average of 108 FPS that leaves ample headroom for any in-game action. Medium settings are a viable fallback at 4K with 68 FPS, but the visual difference between Low and Medium is less impactful than the 40 FPS performance gap.

GPU Role

The NVIDIA GeForce RTX 2070 SUPER plays the dominant role in this combination’s gaming performance, as evidenced by the resolution scaling patterns. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 448.0 GB/s. This memory configuration is sufficient for the demands of Overpower at all tested settings and resolutions, as evidenced by the lack of any sudden performance collapse when moving from 1440p to 4K. The smooth scaling from 1080p to 4K across all presets indicates that the memory subsystem is not a bottleneck.

The GPU’s clock speeds are another important factor. With a base clock of 1605 MHz and a boost clock of 1770 MHz, the RTX 2070 SUPER maintains a high operating frequency that contributes to its 9.062 TFLOPS of FP32 performance. This raw compute power is what drives the frame rates at higher resolutions, and the data shows that it is adequate for playable performance even at 4K Ultra, where the average FPS is 52. The boost clock of 1770 MHz is particularly relevant because it indicates the sustained performance under load, and the measured results confirm that the GPU can maintain playable frame rates across all tested scenarios.

The RTX 2070 SUPER’s position in the broader GPU landscape is solid. Its average benchmark score of 20282 places it in the 65th percentile of all GPUs, and its nearest rivals include the NVIDIA Quadro M4000M with a score of 20480 and a deltaPct of -1.0%, as well as the NVIDIA GeForce RTX 3070 Mobile at 20534 with a deltaPct of -1.2%. This means the RTX 2070 SUPER is within 1.5% of these competitors, indicating that its performance in Overpower is representative of its overall standing. The GPU’s 40 RT cores and 320 tensor cores are also present, though the impact of ray tracing in Overpower cannot be directly assessed from the measured data.

The GPU’s VRAM usage is not explicitly measured, but the 8 GB capacity is a key specification. In a game like Overpower, which appears to be an action title, 8 GB is generally considered adequate for 1080p and 1440p gaming at high settings. The fact that the GPU maintains consistent performance scaling up to 4K suggests that it is not exceeding its memory capacity, as a VRAM overflow would typically cause stuttering or severe frame rate drops. The measured minimum FPS values, such as 57 at 4K Medium, indicate that the GPU is handling the workload without memory-related issues.

FAQ

Q: What is the average frame rate for this combination at 1080p Ultra settings?

A: The average FPS at 1920x1080 with Ultra settings is 69, which is the highest resolution-settings combination that still maintains a smooth experience.

Q: How does the RTX 2070 SUPER compare to its nearest rival, the Intel Arc A750?

A: The RTX 2070 SUPER has an average benchmark score of 20282, while the Intel Arc A750 has a score of 20582, representing a deltaPct of -1.5%, meaning the Arc A750 is slightly faster overall.

Q: Is the Ryzen 5 4600G a bottleneck for the RTX 2070 SUPER in Overpower?

A: The data suggests no. The consistent FPS scaling from 1080p to 4K across all settings indicates that the GPU is the limiting factor, as a CPU bottleneck would show flat frame rates regardless of resolution.

Q: What is the best preset for 4K gaming with this hardware?

A: Low settings at 3840x2160 provide an average of 108 FPS, which is the only 4K preset that exceeds 100 FPS. Medium settings at 68 FPS are a viable alternative if visual quality is preferred.

Q: What is the minimum FPS recorded for this combination?

A: The lowest minimum FPS in the dataset is 57, which occurs at 3840x2160 with Medium settings. This is a playable frame rate for most action games.

Q: How does the CPU’s benchmark score compare to its nearest rival, the AMD Ryzen 3 PRO 5355GE?

A: The Ryzen 5 4600G has an average benchmark score of 17507, while the Ryzen 3 PRO 5355GE scores 17482, giving a deltaPct of 0.1%, meaning the Ryzen 5 is marginally faster.

How This Combo Ranks

The combination of the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 2070 SUPER ranks 2146 out of 3713 tested combos in Overpower, placing it in the upper-middle portion of the database. This ranking reflects the balance between the CPU and GPU, where neither component is exceptionally high-end but both are capable of delivering a solid gaming experience. The 71st percentile ranking of the CPU and 65th percentile ranking of the GPU suggest that this combo is well-matched, as neither component is significantly underpowered relative to the other.

The combo’s rank of 2146 out of 3713 means that approximately 42% of tested combinations perform better, while 58% perform worse. This positions the combo in a competitive spot for mainstream gaming, where it can handle most titles at high settings without issue. The ranking also reflects the fact that the RTX 2070 SUPER is an older GPU, having been released in 2019, but its performance remains relevant thanks to its 2560 shading units and 9.062 TFLOPS of compute power.

The CPU’s contribution to this ranking is notable because the Ryzen 5 4600G is a 4000-series processor with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. Its 6 cores and 12 threads are sufficient for modern gaming workloads, and its single-thread performance, as indicated by a 3DMark single-thread score of 726, is adequate for Overpower’s action gameplay. The combo’s rank also benefits from the GPU’s strong memory bandwidth of 448.0 GB/s, which helps maintain high frame rates at higher resolutions.

Compared to other combos in the database, this pairing does not excel in any single metric but offers consistent performance across the board. The measured FPS data shows that it can achieve 143 FPS at 1080p Low and 52 FPS at 4K Ultra, which is a broad range of playability. This versatility is a key factor in its ranking, as it provides a good experience for both competitive and casual players.

CPU Role

The AMD Ryzen 5 4600G plays a supporting but essential role in this combination’s performance. With 6 cores and 12 threads, the processor provides enough parallel processing power to keep the RTX 2070 SUPER fed with data, as evidenced by the GPU-bound scaling pattern observed in the resolution tests. The CPU’s base clock of 3.70 GHz and boost clock of 4.20 GHz ensure that single-threaded tasks, which are common in game logic and physics, are handled efficiently. The Zen 2 architecture, built on a 7 nm process, delivers a strong balance of performance and power efficiency, with a TDP of 65 W.

The CPU’s cache hierarchy is also relevant to gaming performance. With 64 KB of L1 cache per core, 512 KB of L2 cache per core, and 8 MB of shared L3 cache, the Ryzen 5 4600G has enough cache to reduce memory latency for frequently accessed data. This is particularly important in an action game like Overpower, where fast and responsive gameplay depends on quick data access. The CPU’s dual-channel DDR4 memory support with a memory bandwidth of 51.2 GB/s ensures that the CPU can communicate with system memory without creating a bottleneck.

Benchmark results for the Ryzen 5 4600G show its capabilities. In Cinebench R23, it scores 13593 in multi-core and 1919 in single-core, which are respectable figures for a mid-range processor. The 3DMark scores are also informative: 4863 with 16 threads, 4138 with 8 threads, and 2732 with 4 threads. These scores demonstrate that the CPU scales well with thread count, which is beneficial for games that can utilize multiple cores. The single-thread score of 726 in 3DMark indicates that the CPU’s per-core performance is adequate for gaming, as most games still rely heavily on single-threaded performance.

The CPU’s percentile ranking of 71 among all CPUs places it above average, and its nearest rivals include the AMD Ryzen 3 PRO 5355GE with a deltaPct of 0.1% and the Intel Core 7 150U with a deltaPct of 0.6%. This indicates that the Ryzen 5 4600G is competitive with other processors in its class, and its performance in Overpower is consistent with its overall benchmark standing. The 12 threads are particularly beneficial for games that support multi-threading, as they allow the CPU to handle background tasks without impacting game performance.

In the context of Overpower, the CPU’s role is to maintain a steady frame delivery to the GPU. The measured FPS data shows that even at 4K Low, where the GPU is heavily loaded, the average FPS of 108 is not limited by the CPU. If the CPU were struggling, we would expect to see frame rate inconsistencies or lower minimum FPS values, but the data shows stable performance across all settings. The Ryzen 5 4600G, with its 6 cores and 12 threads, provides a solid foundation for the RTX 2070 SUPER, ensuring that the GPU can operate at its full potential without being starved of data.