Overpower

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 5070 presents a classic generational mix in Overpower. The data shows a 2018-era CPU driving a 2025-era GPU, and the benchmark results reveal how this pairing behaves across resolutions and settings. This analysis breaks down the measured performance, the role of each component, and practical settings guidance based solely on the recorded figures.

Resolution Scaling

The measured FPS data for this combo shows a clear and consistent pattern as resolution increases from 1920x1080 to 3840x2160. At 1080p with Low settings, the system achieves 148 FPS average. Moving to 1440p Low drops that to 142 FPS, and at 4K Low it falls further to 135 FPS. The scaling from 1080p to 4K at Low settings represents a drop of 13 FPS, or approximately 8.8%. This relatively modest decline suggests that at lower settings, the CPU is a significant limiting factor; the GPU has enough headroom that even a 4K resolution increase does not dramatically alter the frame rate.

The High settings curve tells a similar story. At 1080p High, the average is 120 FPS. At 1440p High, it decreases to 116 FPS, and at 4K High, it lands at 99 FPS. The gap from 1080p to 4K here is 21 FPS, or 17.5%. This larger percentage drop compared to Low settings indicates that the GPU is starting to take on more work, but the CPU still holds the system back from fully utilizing the RTX 5070's potential at higher resolutions.

The Ultra settings preset provides the clearest evidence of the limiting component. At 1080p Ultra, the average is 109 FPS. At 1440p Ultra, it is 97 FPS, and at 4K Ultra, it drops to 82 FPS. The scaling from 1080p to 4K at Ultra is a 27 FPS reduction, or 24.8%. This is the steepest relative decline across all settings, which is expected, but the absolute numbers remain surprisingly high for a six-core CPU from 2018.

What is notable is the difference between the Low and Ultra presets at the same resolution. At 1080p, the gap between Low (148 FPS) and Ultra (109 FPS) is 39 FPS. At 4K, the same gap is 53 FPS (135 vs 82). This widening delta indicates that as graphical load increases, the GPU becomes more of a factor, yet the CPU still appears to cap the maximum achievable frame rate. The data shows that the Ryzen 5 2600 with its 6 cores and 12 threads, running at a base clock of 3.40 GHz and boost of 3.90 GHz, is likely the bottleneck in this configuration, especially at 1080p where the RTX 5070 could otherwise push much higher frame rates.

GPU Role

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture with a 5 nm process node. It carries 12 GB of GDDR7 memory on a 192-bit bus, yielding a memory bandwidth of 672.0 GB/s. The GPU's base clock is 2325 MHz, with a boost clock of 2512 MHz. These specifications are relevant when interpreting the measured FPS, as the memory capacity and bandwidth are ample for Overpower at all tested resolutions.

The fact that the GPU does not appear to be the primary limiter at 1080p is supported by the benchmark results. The RTX 5070's high memory bandwidth and 12 GB VRAM are more than sufficient for even 4K Ultra settings, where the average FPS still sits at 82. The data indicates that the GPU is not running out of resources; instead, the CPU's Zen architecture from the 2000 series is likely preventing the GPU from reaching its full potential.

The GPU's benchmark scores place it in the 82nd percentile versus all GPUs, with an average benchmark score of 40377. Its nearest rivals in the database include the AMD Radeon Pro 580 (deltaPct 0.1) and the NVIDIA RTX A500 Mobile (deltaPct 2), which are professional-orientated parts, indicating the RTX 5070's consumer performance is strong. However, in this specific combo, the CPU's performance percentile of 75 versus all CPUs, with an average benchmark score of 21484, suggests a mismatch. The CPU's nearest rivals include the Intel Core Ultra 5 228V (deltaPct 0.2) and the Intel Core i9-11900H (deltaPct 0.5), which are more modern mobile or low-power parts, but the 2600's age shows in its lower single-thread capabilities.

The measured FPS at 4K Medium (107 FPS average, with a min of 91 and max of 123) versus 4K High (99 FPS) shows a relatively small 8 FPS difference. This small gap between Medium and High at 4K suggests that the GPU can handle the increased settings without a major penalty, reinforcing that the CPU is the primary constraint in this pairing.

FAQ

Q: What is the average FPS at 4K with Ultra settings?

A: The measured average FPS at 3840x2160 with Ultra settings is 82 FPS.

Q: How does the 1080p Low performance compare to the 4K Low performance?

A: At 1920x1080 with Low settings, the average FPS is 148. At 3840x2160 with Low settings, the average FPS is 135, a drop of 13 FPS.

Q: Is the CPU or GPU the bottleneck in this configuration?

A: The data suggests the AMD Ryzen 5 2600 is the primary limiting factor. At 1080p, the average FPS across all settings is between 109 and 148, which is high but not exceptional for an RTX 5070, indicating the CPU is capping performance.

Q: What is the minimum FPS recorded for this combo?

A: The only recorded minimum FPS values are for the Medium settings preset: 105 FPS at 1080p, 101 FPS at 1440p, and 91 FPS at 4K.

Q: How does the RTX 5070's memory bandwidth affect the results?

A: The GPU has a memory bandwidth of 672.0 GB/s, which is more than sufficient for Overpower's demands at all tested resolutions and settings, as the FPS drops are more attributable to CPU limits than memory constraints.

Q: What is the combo's rank among all tested combinations in this game?

A: This specific combo ranks 1186 out of 3713 tested combinations in Overpower.

Measured FPS Breakdown

The benchmark data provides a complete matrix of average FPS across three resolutions and four settings presetsasi. At 1920x1080, the performance ranges from a low of 109 FPS on Ultra to a high of 148 FPS on Low. The Medium preset sits at 123 FPS, with a recorded minimum of 105 FPS and a maximum of 142 FPS. High settings at 1080p yield 120 FPS.

Moving to 2560x1440, the averages are predictably lower. Low settings produce 142 FPS, High settings 116 FPS, and Ultra settings 97 FPS. The Medium preset at 1440p records an average of 119 FPS, with a minimum of 101 FPS and a maximum of 136 FPS. The scaling from 1080p to 1440p is linear, with an average drop of approximately 8 FPS across all settings.

At 3840x2160, the performance remains playable across the board. Low settings average 135 FPS, High settings average 99 FPS, and Ultra settings average 82 FPS. The Medium preset at 4K averages 107 FPS, with a minimum of 91 FPS and a maximum of 123 FPS. The most significant absolute drop occurs between 1080p and 4K on the Ultra preset, where the average falls from 109 to 82 FPS.

The data shows that the Medium preset offers the most consistent frame pacing, as it is the only setting level with recorded min/max values. At 4K Medium, the fluctuation between min (91) and max (123) is 32 FPS, which is a wide spread. At 1080p Medium, the spread is 37 FPS (105 to 142), and at 1440p Medium, it is 35 FPS (101 to 136). This variance suggests that while average FPS is high, there are moments of significant frame rate fluctuation, likely due to CPU processing spikes.

How This Combo Ranks

In the database of tested combinations for Overpower, this pairing of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5070 ranks 1186 out of 3713 total combos. This places it in the upper third of all tested systems, which is respectable given the age of the CPU. The rank reflects that the GPU is a high performer (82nd percentile vs all GPUs), but the CPU's lower relative standing (75th percentile vs all CPUs) drags down the overall combo ranking.

The CPU's average benchmark score is 21484, which is nearly identical to its nearest rivals. The Intel Core Ultra 5 228V scores 21440 (deltaPct 0.2), and the Intel Core i9-11900H scores 21367 (deltaPct 0.5). The AMD EPYC 9454 scores 21223 (deltaPct 1.2), meaning the Ryzen 5 2600 is roughly 1.2% faster than that server chip. This clustering shows that the 2600's multi-threaded performance is still competitive with modern parts, but its single-thread performance (PassMark score of 2239) is what holds it back in gaming scenarios.

The GPU's average benchmark score is 40377, with its nearest rival being the AMD Radeon Pro 580 at 40318 (deltaPct 0.1). The NVIDIA RTX A500 Mobile is 2% slower (score 39568). This data confirms that the RTX 5070 is a top-tier consumer GPU, and the combo's rank of 1186 is primarily limited by the CPU's age rather than the GPU's capability.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution and desired frame rate consistency. For 1080p gaming, the Ultra preset at 109 FPS average is the best choice if visual fidelity is paramount, as it remains above the 60 FPS threshold and offers the highest quality. However, for competitive play where higher frame rates are beneficial, the Low preset at 148 FPS is the highest average available, though it sacrifices visual quality.

At 1440p, the Medium preset offers 119 FPS average, which is the second-highest average at that resolution, just behind Low at 142 FPS. The Medium preset's recorded minimum of 101 FPS ensures that the frame rate rarely drops below the 100 FPS mark, providing a smoother experience than High (116 FPS average) or Ultra (97 FPS average). The Ultra preset at 1440p dips to 97 FPS average, which is still playable but approaches the lower threshold for high-refresh-rate monitors.

For 4K gaming, the Medium preset is the recommended choice. At 107 FPS average, it outperforms High (99 FPS) and Ultra (82 FPS) while maintaining a minimum of 91 FPS. The Low preset at 4K offers 135 FPS, but the visual downgrade is substantial. The data indicates that Medium at 4K is the sweet spot, providing a balance of visual quality and performance that keeps the average FPS above 100.

The Ultra preset at 4K drops to 82 FPS, which is still smooth on a standard 60 Hz display, but the 25 FPS gap between Medium and Ultra at 4K suggests diminishing returns in visual quality versus performance. Given that the CPU is the limiting factor, raising settings from Medium to Ultra does not cost as much as expected, but the Medium preset's measured min/max data (91 to 123) indicates it has the most stable frame delivery of the 4K options. For the best overall experience, especially at 1440p or 4K, the Medium preset provides the highest average FPS with the most consistent frame times.