Overpower
This combination delivers exceptional performance with an average of 121 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 100 | 108 | 115 | 135 |
| 1440p QHD | 106 | 113 | 121 | 145 |
| 1080p Full HD | 113 | 121 | 126 | 149 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Overpower with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4080 SUPER, In-Depth Analysis
The AMD Ryzen 5 2600 and NVIDIA GeForce RTX 4080 SUPER combination in Overpower demonstrates a clear pattern: the pairing is overwhelmingly GPU-bound at higher resolutions, but the processor’s age becomes a noticeable constraint at 1080p. The data shows a maximum average of 148.5 FPS at 1080p Low settings, which scales down to 100.1 FPS at 4K Ultra. This represents a 32.6% performance drop from the lowest settings at 1080p to the highest at 4K, indicating that while the RTX 4080 SUPER provides substantial headroom, the Ryzen 5 2600 limits the absolute peak frame rates.
Resolution Scaling
The measured FPS data reveals a non-linear scaling pattern across resolutions. At 1080p Low settings, the combo achieves 148.5 FPS, but moving to 1440p Low only drops this to 145.2 FPS—a mere 2.2% reduction. This tight gap suggests that at these settings, the system is not yet fully GPU-bound, and the CPU is likely the limiting factor. However, the scaling steepens dramatically at higher settings: 1080p Ultra runs at 113.2 FPS, while 1440p Ultra drops to 105.6 FPS (a 6.7% decline), and 4K Ultra falls to 100.1 FPS (an 11.6% decline from 1440p Ultra).
The most revealing comparison is between 1080p and 4K at the same settings. At Low, the drop is from 148.5 to 135 FPS (9.1%), but at Ultra, the drop is from 113.2 to 100.1 FPS (11.6%). This indicates that as settings increase, the GPU becomes more dominant, and the CPU’s influence on frame rates diminishes. The 4K High result of 108 FPS versus 4K Medium at 114.5 FPS shows that even at 4K, the GPU has enough headroom to handle a settings jump without collapsing performance, but the CPU prevents the system from ever exceeding 148.5 FPS regardless of resolution.
FAQ
*Q: What is the highest average FPS this combo achieves in Overpower?*
A: The maximum measured average is 148.5 FPS, achieved at 1920x1080 with Low settings.
Q: How does the combo perform at 4K Ultra settings?
A: At 3840x2160 with Ultra settings, the average FPS drops to 100.1, which is the lowest score across all tested configurations.
Q: Is the Ryzen 5 2600 bottlenecking the RTX 4080 SUPER in this game?
A: Yes, the evidence points to CPU limitation at lower resolutions: the difference between 1080p Low (148.5 FPS) and 1440p Low (145.2 FPS) is only 3.3 FPS, suggesting the CPU caps performance before the GPU is fully stressed.
Q: What is the performance gap between Medium and Ultra settings at 1440p?
A: At 2560x1440, Medium produces 121.2 FPS while Ultra produces 105.6 FPS, a difference of 15.6 FPS (13.7% slower).
Q: Does the RTX 4080 SUPER's 16 GB VRAM help at 4K in this game?
A: The data shows the combo maintains playable frame rates at 4K across all settings, with a minimum of 100.1 FPS at Ultra, indicating the 16 GB frame buffer is sufficient for this title.
*Q: How does the combo rank among all tested combinations in Overpower?*
A: It ranks 498th out of 1,744 tested combos, placing it in the top 28.6% of all pairings.
GPU Role
The NVIDIA GeForce RTX 4080 SUPER is the dominant component in this pairing, and its specifications explain why the 4K results remain competitive. The GPU operates with a base clock of 2295 MHz and a boost clock of 2550 MHz, paired with 16 GB of GDDR6X memory on a 256-bit bus. The memory bandwidth of 736.3 GB/s is substantial, and the 23 Gbps effective memory speed provides ample data throughput for Overpower's action sequences.
Benchmark scores reinforce the GPU’s strength. The RTX 4080 SUPER achieves a Passmark G3D score of 34,245 and a Geekbench OpenCL score of 246,994, placing it in the 88th percentile of all GPUs. Its nearest rival, the AMD Radeon RX 6900 XT, scores 53,489 on the average benchmark, a delta of only 0.2%, meaning the 4080 SUPER is statistically tied with that card. The 3DMark Steel Nomad DX12 score of 6,600 further confirms its high-end positioning. In Overpower, this translates to 4K Ultra performance of 100.1 FPS, which is only 8.4% slower than the 1080p Low result, showing that the GPU has enough raw power to handle the resolution jump with minimal penalty.
Measured FPS Breakdown
At 1920x1080, the combo delivers its best results. Low settings produce 148.5 FPS, Medium drops to 125.6 FPS, High yields 121.3 FPS, and Ultra maintains 113.2 FPS. The spread from Low to Ultra is 35.3 FPS (23.8%), which is the largest relative gap across all resolutions, indicating that the CPU is the limiting factor here—the GPU could likely push higher frame rates if the processor allowed.
Moving to 2560x1440, the scores compress slightly. Low settings reach 145.2 FPS, Medium falls to 121.2 FPS, High delivers 113.4 FPS, and Ultra bottoms out at 105.6 FPS. The difference between 1080p Low and 1440p Low is only 3.3 FPS (2.2%), but the gap between 1080p Ultra and 1440p Ultra is 7.6 FPS (6.7%). This pattern suggests that at lower settings, the CPU bottleneck persists, but at higher settings, the GPU begins to take over.
At 3840x2160, the GPU becomes the clear bottleneck. Low settings yield 135 FPS, Medium produces 114.5 FPS, High achieves 108 FPS, and Ultra settles at 100.1 FPS. The drop from 1440p Low to 4K Low is 10.2 FPS (7.0%), while the drop from 1440p Ultra to 4K Ultra is only 5.5 FPS (5.2%). This inverted scaling—where higher settings see smaller relative drops—is a hallmark of a GPU-bound scenario, where the RTX 4080 SUPER’s 52.22 TFLOPS FP32 performance is being fully utilized.
CPU Role
The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the Zen architecture, clocked at 3.40 GHz base and 3.90 GHz boost. Its 16 MB of shared L3 cache and dual-channel DDR4 memory support with 46.9 GB/s bandwidth are modest by modern standards, and the benchmark data confirms its mid-range positioning. The CPU scores 11,186 in Cinebench R23 multi-core and 1,579 in single-core, placing it in the 77th percentile of all CPUs. Its average benchmark score of 19,616 is nearly identical to the Intel Core i5-1345U (19,691, a -0.4% delta) and the AMD Ryzen 5 7530U (19,508, a 0.6% delta), showing that while it is not a top-tier chip, it remains competitive with newer mobile parts.
In Overpower, the CPU’s limitation is most visible at 1080p Low, where the frame rate of 148.5 FPS is only 2.2% higher than at 1440p Low (145.2 FPS). This near-parity indicates that the Ryzen 5 2600 cannot feed the RTX 4080 SUPER enough data to saturate its rendering pipeline at lower resolutions. The Passmark single-thread score of 2,239 and the Cinebench R23 single-core score of 1,579 are the key metrics here—both are below what a modern high-end CPU would achieve, and this shows up as a hard ceiling on frame rates. However, at 4K, the CPU’s role diminishes, and the GPU’s 16 GB VRAM and 736.3 GB/s bandwidth take over, allowing the combo to still deliver 100.1 FPS at Ultra.
Settings Recommendations
The data suggests that Ultra settings are the best choice for most users, as the performance penalty is modest relative to lower presets. At 1080p, Ultra produces 113.2 FPS, which is only 8.6% slower than Medium (125.6 FPS) but offers the full visual experience. The same logic applies at 1440p, where Ultra at 105.6 FPS is still well above the 60 FPS threshold, and the 15.6 FPS gap to Medium (121.2 FPS) is acceptable given the graphical uplift.
For 4K users, High settings (108 FPS) are the sweet spot. The difference between High and Ultra at 4K is only 7.9 FPS (7.3%), but High provides a 14.5% improvement over Medium (114.5 FPS). Low settings are not recommended at any resolution, as they only provide marginal gains over Medium—at 1080p, the jump from Low (148.5 FPS) to Medium (125.6 FPS) is 18.2%, but at 4K, the jump from Low (135 FPS) to Medium (114.5 FPS) is 17.9%, yet the visual quality loss is significant. The best experience is Ultra at 1080p or 1440p, or High at 4K, depending on the display resolution.
How This Combo Ranks
Among 1,744 tested combinations in Overpower, this pairing of the Ryzen 5 2600 and RTX 4080 SUPER ranks 498th. This places it in the top 28.6% of all combos, which is a strong result given the CPU’s age. The ranking is driven almost entirely by the GPU’s performance—the RTX 4080 SUPER sits in the 88th percentile of all GPUs, while the CPU is only in the 77th percentile. The delta between the two components is evident in the frame rates: the combo never exceeds 148.5 FPS, which is a CPU-imposed limit, but it also never drops below 100.1 FPS at 4K Ultra, which is a GPU-driven floor.
The combo’s rank of 498 out of 1,744 suggests that while it is not a top-tier pairing, it outperforms the majority of tested systems. The bottleneck is clear—a newer CPU with higher single-thread performance would likely push this combo into the top 400, as the GPU has ample headroom. However, for a system built around a 2018-era processor, the RTX 4080 SUPER boosts the overall experience to a level that most combinations cannot match, particularly at 4K where the GPU’s 16 GB VRAM and 52.22 TFLOPS of compute power shine.
Hardware Specifications
AMD Ryzen 5 2600
NVIDIA GeForce RTX 4080 SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4080 SUPER in Overpower
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 135.0 |
| 3840x2160 | Medium | 114.5 |
| 3840x2160 | High | 108.0 |
| 3840x2160 | Ultra | 100.1 |
| 2560x1440 | Low | 145.2 |
| 2560x1440 | Medium | 121.2 |
| 2560x1440 | High | 113.4 |
| 2560x1440 | Ultra | 105.6 |
| 1920x1080 | Low | 148.5 |
| 1920x1080 | Medium | 125.6 |
| 1920x1080 | High | 121.3 |
| 1920x1080 | Ultra | 113.2 |
Overpower with Ryzen 5 2600 + Other GPUs
See how Overpower performs with the same CPU but different graphics cards.
Overpower with RTX 4080 SUPER + Other CPUs
See how Overpower performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RTX 4080 SUPER
Explore FPS benchmarks for other games using this same hardware combination.