Outriders
This combination delivers exceptional performance with an average of 128 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 48 | 66 | 86 | 119 |
| 1440p QHD | 89 | 126 | 153 | 172 |
| 1080p Full HD | 140 | 162 | 177 | 200 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Outriders with AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 5070, In-Depth Analysis
The AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce RTX 5070 delivers a performance profile in Outriders that is heavily dictated by graphics settings and resolution. This combo ranks 452nd out of 1693 tested combinations, placing it comfortably in the top third of all systems tested for this looter shooter. The data reveals a system that scales predictably with resolution but shows interesting behavior when settings are adjusted, particularly at 4K where the GPU workload becomes the dominant factor.
Resolution Scaling
The measured FPS data shows a clear pattern of diminishing returns as resolution increases, but the magnitude of the drop varies significantly by quality preset. At High settings, the average frame rate falls from 161.5 FPS at 1920x1080 to 126.3 FPS at 2560x1440, a reduction of roughly 22%. Moving from 1440p to 3840x2160 High brings the average down to 66.4 FPS, which represents a 47% decrease from the 1440p result. This steep decline at 4K indicates that the RTX 5070’s rendering load is scaling aggressively with pixel count, and the GPU becomes the primary limiting component at this resolution.
The Low preset tells a different story. At 1080p Low, the combo achieves 199.9 FPS, and at 1440p Low it still manages 172.4 FPS. Even at 4K Low, the system holds onto 119.2 FPS. The gap between 1080p Low and 4K Low is about 40%, which is smaller than the 59% drop seen between 1080p High and 4K High. This suggests that at Low settings, the CPU has more headroom to feed the GPU, and the frame rate ceiling is less constrained by pixel throughput. The 5800X3D’s 8 cores and 16 threads with a 4.50 GHz boost clock are sufficient to keep up with the RTX 5070 even when the graphical load is light.
Ultra settings amplify the resolution sensitivity. At 1080p Ultra, the average is 140 FPS, which drops to 89.3 FPS at 1440p and collapses to 48.2 FPS at 4K. The 4K Ultra result is less than a quarter of the 1080p Low figure, showing that the combination of maximum quality and high resolution pushes the GPU to its absolute limit. The data indicates that for smooth 4K play, users would need to stay at Medium or High settings, as the 48.2 FPS average at Ultra falls below the 60 FPS threshold commonly targeted for fluid gameplay.
How This Combo Ranks
With a combo rank of 452 out of 1693 tested systems, this pairing sits in the 73rd percentile of all combinations evaluated. That places it ahead of roughly three-quarters of the field, which is a strong result for a looter shooter that benefits from both CPU cache and GPU rasterization power. The ranking reflects the balanced nature of the hardware: the 5800X3D’s 96 MB of shared L3 cache is well-suited for the data-heavy loot systems in Outriders, while the RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth handle the game’s texture streaming demands.
The CPU alone holds an 83rd percentile ranking among all processors tested, and the GPU matches that with its own 83rd percentile placement. This symmetry suggests the two components are well-matched in overall capability, avoiding a scenario where one significantly bottlenecks the other. The nearest rivals for the CPU include the AMD EPYC 8024P (0.1% higher average score) and the Intel Core i9-11900K (0.1% higher), while the GPU’s closest competitors are the AMD Radeon Pro 5300 (0.2% higher) and the NVIDIA GeForce RTX 3090 (0.6% higher). These margins are negligible, indicating that the 5800X3D and RTX 5070 are both performing at the expected level for their respective classes.
The ranking data shows that this combo is not an outlier in either direction. It delivers consistent frame rates across all tested configurations, with the 4K Ultra result being the only configuration that dips below 60 FPS. For a game like Outriders, where combat encounters can involve numerous enemies and particle effects, the 140 FPS at 1080p Ultra and 126.3 FPS at 1440p High provide ample headroom for competitive play, while the 66.4 FPS at 4K High remains playable on standard displays.
FAQ
Q: What is the best resolution for this combo in Outriders at High settings?
A: At 2560x1440 High, the combo delivers 126.3 FPS, which is well above the 60 FPS threshold. At 3840x2160 High, the average drops to 66.4 FPS, which is still playable but leaves less margin for demanding scenes.
Q: How does the CPU’s cache size impact Outriders performance?
A: The Ryzen 7 5800X3D features 96 MB of shared L3 cache, which is significantly larger than typical desktop processors. This large cache helps reduce memory latency, which can benefit games with frequent data access patterns like looter shooters.
Q: Can this system handle 4K Ultra settings in Outriders?
A: The 4K Ultra preset averages 48.2 FPS, which is below the 60 FPS target. For a smoother experience, dropping to 4K High (66.4 FPS) or 4K Medium (86 FPS) is recommended.
Q: What is the maximum frame rate achievable with this combo?
A: The highest recorded average is 199.9 FPS at 1920x1080 with Low settings. At 1080p Ultra, the average is 140 FPS, and at 1440p Low it reaches 172.4 FPS.
Q: How does the RTX 5070’s memory bandwidth affect 4K performance?
A: The GPU has 672.0 GB/s of bandwidth across a 192-bit bus with 12 GB of GDDR7 memory. This bandwidth is sufficient to maintain 66.4 FPS at 4K High, but the 48.2 FPS at 4K Ultra suggests that raw compute limits are reached before memory bandwidth becomes a constraint.
Q: What settings provide the best balance between quality and frame rate at 1440p?
A: At 2560x1440, Medium settings yield 152.5 FPS, High yields 126.3 FPS, and Ultra yields 89.3 FPS. All three are above 60 FPS, so the choice depends on preference for visual fidelity versus higher refresh rates.
Measured FPS Breakdown
The measured data provides a complete picture across three resolutions and four quality presets. At 1920x1080, the combo starts at 199.9 FPS on Low and scales down through 176.8 FPS on Medium, 161.5 FPS on High, and finally 140 FPS on Ultra. This represents a 30% reduction from Low to Ultra at 1080p, showing that even at the lowest resolution, the Ultra preset imposes a measurable cost on the GPU.
At 2560x1440, the spread is wider. Low settings produce 172.4 FPS, Medium drops to 152.5 FPS, High falls to 126.3 FPS, and Ultra bottoms out at 89.3 FPS. The difference between Low and Ultra at 1440p is 48%, which is a larger relative gap than at 1080p. This indicates that the RTX 5070’s shading units (6144) and texture units (192) are being pushed harder as pixel count increases.
The 3840x2160 results show the most dramatic scaling. Low settings still deliver 119.2 FPS, but Medium drops to 86 FPS, High falls to 66.4 FPS, and Ultra plummets to 48.2 FPS. The gap between Low and Ultra at 4K is 60%, the largest of any resolution tested. This pattern confirms that 4K Ultra is the most demanding configuration, and the 48.2 FPS result is the only measurement below the 60 FPS mark across the entire dataset.
CPU Role
The AMD Ryzen 7 5800X3D is a Zen 3 architecture processor built on a 7 nm process with 8 cores and 16 threads. Its base clock of 3.40 GHz boosts up to 4.50 GHz, and the CPU’s 96 MB of shared L3 cache is its defining feature for gaming workloads. In synthetic benchmarks, it scores 24063 in Cinebench R23 multicore and 3397 in single-core, with a 3DMark 16-thread score of 7299. These numbers place it in the 83rd percentile of all CPUs, with an average benchmark score of 26574.
Outriders is a game that benefits from both high single-thread performance and substantial cache. The 5800X3D’s single-core score of 3397 in Cinebench R23 ensures that the game’s main thread runs efficiently, while the large L3 cache helps with the frequent data lookups associated with loot generation and enemy AI. The CPU’s nearest rivals include the Intel Core i9-11900K (0.1% higher average score) and the AMD Ryzen 5 7600 (0.2% lower), showing that the 5800X3D remains competitive despite being from an older generation.
The data shows that the CPU is not the limiting factor in most tested configurations. At 1080p Low, the combo reaches 199.9 FPS, which is close to the practical ceiling for many displays. Even at 4K Low, the system maintains 119.2 FPS, indicating that the GPU has ample support from the processor. The CPU’s 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth provide a solid foundation, though the memory bandwidth is modest compared to the GPU’s 672.0 GB/s. This imbalance is expected, as the CPU and GPU handle different types of data, and the benchmark results confirm that the pairing works effectively for Outriders.
Hardware Specifications
AMD Ryzen 7 5800X3D
NVIDIA GeForce RTX 5070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5800X3D + NVIDIA GeForce RTX 5070 in Outriders
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 119.2 |
| 3840x2160 | Medium | 86.0 |
| 3840x2160 | High | 66.4 |
| 3840x2160 | Ultra | 48.2 |
| 2560x1440 | Low | 172.4 |
| 2560x1440 | Medium | 152.5 |
| 2560x1440 | High | 126.3 |
| 2560x1440 | Ultra | 89.3 |
| 1920x1080 | Low | 199.9 |
| 1920x1080 | Medium | 176.8 |
| 1920x1080 | High | 161.5 |
| 1920x1080 | Ultra | 140.0 |
Outriders with Ryzen 7 5800X3D + Other GPUs
See how Outriders performs with the same CPU but different graphics cards.
Outriders with RTX 5070 + Other CPUs
See how Outriders performs with the same GPU but different processors.
Other Games with Ryzen 7 5800X3D + RTX 5070
Explore FPS benchmarks for other games using this same hardware combination.