Outriders
This combination delivers exceptional performance with an average of 130 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 55 | 75 | 103 |
| 1440p QHD | 80 | 109 | 146 | 200 |
| 1080p Full HD | 124 | 172 | 213 | 243 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Outriders with AMD Ryzen 5 7600 + AMD Radeon RX 9070, In-Depth Analysis
The AMD Ryzen 5 7600 paired with the AMD Radeon RX 9070 delivers a solid, high-refresh-rate experience in Outriders, though the game’s demanding Ultra preset will test the GPU’s limits at higher resolutions. The data shows a clear progression of performance scaling that shifts the bottleneck between the CPU and GPU depending on the resolution and settings selected.
Resolution Scaling
The measured frame rates reveal a predictable and steep drop in performance as resolution increases. At 1080p with Low settings, the combo achieves an average of 243.4 FPS. Moving to 1440p Low drops this to 200.1 FPS, a 17.8% reduction, while 4K Low sees a more significant decline to 103.4 FPS, which is roughly 57.5% slower than the 1080p result. This pattern indicates that at lower resolutions, the CPU has ample headroom, and the GPU becomes the primary limiting factor as pixel count rises.
The gap between resolutions widens considerably at higher quality presets. At High settings, the average FPS goes from 171.6 at 1080p, down to 108.7 at 1440p, and finally to 54.8 at 4K. The performance hit from 1080p to 4K at High is a severe 68.1% reduction, showing that the RX 9070’s rendering workload scales dramatically with resolution. The 4K High result of 54.8 FPS is barely playable for a smooth experience, while 4K Ultra falls to 42.7 FPS, indicating the GPU is fully saturated.
The scaling from Medium to Ultra at each resolution also highlights the cost of the preset. At 1080p, the jump from Medium (212.6 FPS) to Ultra (124 FPS) represents a 41.7% performance loss. This suggests that while the CPU can push very high frame rates at lower settings, the Ultra preset’s additional effects place a heavy load on the GPU, causing a disproportionate drop compared to the step from Low to Medium. The data confirms that this pairing is best suited for 1080p and 1440p gaming, where high refresh rates are achievable, while 4K should be reserved for lower presets.
How This Combo Ranks
In the database of tested combinations for Outriders, this specific CPU-GPU pairing ranks 418th out of 1693 combos, placing it in the top 25% of all tested systems. This percentile position indicates that the Ryzen 5 7600 and RX 9070 together provide a robust foundation for this looter shooter, outperforming the majority of other configurations. The rank is a holistic measure of the combo’s capability across the tested settings, and its placement suggests a balanced pairing that avoids severe bottlenecks at most resolutions.
The ranking reflects a system that excels at 1080p and 1440p, where the frame rates are consistently high. The 4K results, while lower, still remain playable at Medium settings (74.5 FPS), which is a respectable outcome for a game with demanding visuals. The combo’s position relative to all other tested pairs indicates that users can expect a smooth experience without needing to overclock or tinker with settings for the majority of play scenarios. It is not an extreme top-tier configuration, but it sits comfortably in the upper quartile, making it a reliable choice for Outriders.
GPU Role
The AMD Radeon RX 9070 features 16 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 644.6 GB/s. This substantial VRAM allocation is more than sufficient for Outriders at any resolution tested, ensuring that texture streaming and asset loading do not become a bottleneck. The 4K High result of 54.8 FPS is not due to memory capacity limits but rather the raw compute power required by the game’s rendering engine.
The GPU’s clock speeds are significant for understanding its performance. The boost clock is listed at 2520 MHz, while the game clock is 2070 MHz. The difference between these two figures suggests that under sustained gaming loads, the card will typically operate closer to the game clock, which still delivers strong results. The pixel rate of 322.6 GPixel/s and texture rate of 564.5 GTexel/s are the key metrics driving fill-rate heavy scenes, and the data shows that these are sufficient for 1440p High at 108.7 FPS but struggle to maintain 60 FPS at 4K High.
The GPU’s overall benchmark percentile of 79 versus all GPUs indicates it is a strong performer, but its nearest rivals in the database include the NVIDIA Quadro GV100 and AMD Radeon HD 7970, with delta percentages of 0.3% and 0.7% respectively. These comparisons suggest that while the RX 9070 is a modern card, its raw average score is closely matched by older or workstation-oriented parts in synthetic tests. However, the measured Outriders results show that real-world gaming performance is heavily dependent on the driver optimizations and game-specific workloads, where the RX 9070’s RDNA 4.0 architecture excels.
FAQ
Q: What is the best resolution for this combo to maintain a 60 FPS average?
A: At 1440p, the High preset delivers 108.7 FPS, which is well above 60. For a 4K experience, the Medium preset achieves 74.5 FPS, making it the highest quality setting that comfortably exceeds the 60 FPS target. The 4K High preset falls to 54.8 FPS, just below the threshold.
Q: How much performance is lost when moving from 1080p to 4K at the same settings?
A: At Low settings, the drop is from 243.4 FPS to 103.4 FPS, a loss of 140 FPS. At High settings, the drop is from 171.6 FPS to 54.8 FPS, a loss of 116.8 FPS. The percentage loss is more severe at higher presets, with 4K High being 68.1% slower than 1080p High.
Q: Is the 16 GB VRAM a limiting factor in this game?
A: No. The available 16 GB of GDDR6 memory is not a bottleneck in any of the measured scenarios. The performance drops are consistent with compute and fill-rate limitations rather than memory capacity, as the game does not appear to exceed the VRAM allocation even at 4K Ultra.
Q: How does the CPU’s single-thread performance affect the frame rates?
A: The Ryzen 5 7600 has a single-thread benchmark score of 3910 in Passmark and a 3DMark single-thread score of 999. These strong scores support the high frame rates seen at 1080p Low (243.4 FPS), ensuring that the CPU does not hold back the GPU in less demanding scenes.
Q: What is the ranking of this combo compared to others?
A: The combo ranks 418th out of 1693 total tested combinations for Outriders. This places it in the upper quartile, indicating it performs better than roughly 75% of other systems in the database.
Q: Is there a large gap between Medium and Ultra settings?
A: Yes. At 1440p, the gap from Medium (146.1 FPS) to Ultra (80 FPS) is a 45.3% reduction in performance. At 4K, the drop from Medium (74.5 FPS) to Ultra (42.7 FPS) is even more pronounced, at 42.7% slower, making Ultra impractical for smooth 4K play.
Settings Recommendations
For the best balance of visual fidelity and performance, the Medium preset is the strongest choice across all resolutions. At 1080p, Medium delivers 212.6 FPS, which is only 30.8 FPS lower than Low but provides a significantly better visual experience. At 1440p, Medium achieves 146.1 FPS, making it ideal for high-refresh-rate monitors, as it offers a 37.4 FPS improvement over High while still looking sharp. Even at 4K, Medium is the only preset that keeps the average above 60 FPS at 74.5 FPS, making it the optimal choice for users with 4K displays.
The High preset is a viable alternative for 1080p and 1440p users who prioritize visuals over raw frame rates. At 1080p, High still produces 171.6 FPS, which is smooth for most displays. At 1440p, High yields 108.7 FPS, which is perfect for a 100Hz or 120Hz panel. However, the High preset at 4K is not recommended, as the 54.8 FPS average introduces noticeable stutter and falls below the desired 60 FPS threshold.
The Ultra preset is only recommended for 1080p users with a standard 60Hz monitor. The 124 FPS at 1080p Ultra is still comfortably above 60, but the visual improvements over High are marginal compared to the 27.5% performance cost. At 1440p and 4K, Ultra should be avoided, as the 80 FPS and 42.7 FPS results respectively do not justify the significant drop in smoothness, especially in a fast-paced looter shooter where responsiveness matters.
CPU Role
The AMD Ryzen 5 7600 is a 6-core, 12-thread processor based on the Zen 4 architecture, with a base clock of 3.80 GHz and a boost clock of 5.10 GHz. Its 32 MB of shared L3 cache and DDR5 memory support provide a solid foundation for gaming. The benchmark data shows a multi-threaded Cinebench R23 score of 22992 and a single-core score of 3246, indicating strong all-around performance that scales well with the GPU.
In Outriders, the CPU’s role becomes most apparent at lower resolutions and settings. At 1080p Low, the system reaches 243.4 FPS, a figure that is likely near the CPU’s maximum frame delivery limit. The single-thread performance, evidenced by the 3DMark single-thread score of 999, ensures that the game’s main simulation thread is not a bottleneck. The data shows that even at 1440p High, the CPU maintains 108.7 FPS, proving it has enough headroom to feed the GPU efficiently at mainstream resolutions.
The CPU’s ranking against its nearest rivals shows it is a balanced performer. It has a 0.2% higher average score than the AMD Ryzen 7 5800X3D and a 0.2% lower score than the Intel Core i9-12900HK. This places it in a competitive tier, though the 7600’s lower core count compared to the 5800X3D is offset by its higher single-thread efficiency. For Outriders, the data confirms that the CPU is not the limiting factor in any of the measured scenarios; the GPU is the primary constraint, especially at 4K and with higher presets. The CPU’s 65W TDP also indicates an efficient part that does not require extreme cooling solutions to sustain its boost clocks during extended gaming sessions.
Hardware Specifications
AMD Ryzen 5 7600
AMD Radeon RX 9070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7600 + AMD Radeon RX 9070 in Outriders
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 103.4 |
| 3840x2160 | Medium | 74.5 |
| 3840x2160 | High | 54.8 |
| 3840x2160 | Ultra | 42.7 |
| 2560x1440 | Low | 200.1 |
| 2560x1440 | Medium | 146.1 |
| 2560x1440 | High | 108.7 |
| 2560x1440 | Ultra | 80.0 |
| 1920x1080 | Low | 243.4 |
| 1920x1080 | Medium | 212.6 |
| 1920x1080 | High | 171.6 |
| 1920x1080 | Ultra | 124.0 |
Outriders with Ryzen 5 7600 + Other GPUs
See how Outriders performs with the same CPU but different graphics cards.
Outriders with RX 9070 + Other CPUs
See how Outriders performs with the same GPU but different processors.
Other Games with Ryzen 5 7600 + RX 9070
Explore FPS benchmarks for other games using this same hardware combination.