Outriders

The AMD Ryzen 5 7600 and Intel Arc B570 pairing delivers a playable but resolution-sensitive experience in Outriders, with performance that scales predictably from excellent 1080p throughput to a marginal 4K showing. The data indicates this combo is best suited for 1440p gaming, where it balances visual quality and frame rates effectively, while 4K requires significant settings compromises to remain fluid.

Resolution Scaling

The measured FPS data reveals a steep performance cliff as resolution increases, a pattern that clearly identifies the Intel Arc B570 as the primary limiting factor at higher pixel counts. At 1080p with High settings, the combo produces an average of 96 FPS, which drops to 61 FPS at 1440p—a 36% reduction. Moving to 4K, the average falls further to 32 FPS, representing a 67% decline from the 1080p baseline. This scaling curve suggests the CPU is more than capable of feeding the GPU at lower resolutions, but the graphics card’s raw throughput becomes the bottleneck as pixel count grows.

The gap between Low and Ultra settings widens dramatically at higher resolutions, confirming the GPU-bound nature of 4K performance. At 1080p, Low settings yield 176 FPS versus 70 FPS on Ultra—a 2.5x spread. At 1440p, the range spans from 111 FPS (Low) to 44 FPS (Ultra). However, at 4K, Low settings produce 58 FPS while Ultra drops to just 23 FPS, a 2.5x difference that underscores how the B570’s compute resources are overwhelmed by the sheer pixel workload. The 4K Medium preset, with an average of 42 FPS and a minimum of 36 FPS, represents the only 4K configuration that approaches smooth gameplay, though it remains below the 60 FPS threshold.

The scaling pattern indicates that the Ryzen 5 7600’s six Zen 4 cores are not the constraint. At 1080p Low, the system achieves 176 FPS, a figure that would likely expose CPU limitations in less optimized titles, but in Outriders the data shows no such ceiling. The 7600’s 3DMark single-thread score of 999 and multi-thread score of 6503 suggest ample headroom for this title’s demands. Instead, the B570’s 11.52 TFLOPS of FP32 compute and 380.0 GB/s memory bandwidth become the decisive factors, with the 160-bit memory bus proving insufficient for 4K Ultra workloads. Users targeting 4K should expect to use Low or Medium settings exclusively, while 1440p and 1080p offer far more flexibility.

GPU Role

The Intel Arc B570’s specifications directly explain its performance profile in Outriders. With 10 GB of GDDR6 memory on a 160-bit bus delivering 380.0 GB/s, the card has sufficient capacity for 1080p and 1440p textures but struggles with the higher memory pressure of 4K. The base and boost clocks are both locked at 2500 MHz, which is modest by current standards but consistent across the tested scenarios. The 2304 shading units and 144 TMUs provide solid geometry throughput, yet the 80 ROPs limit pixel fill at high resolutions, a likely contributor to the sharp 4K drop-off.

The B570’s benchmark scores place it in the 65th percentile of all GPUs, with an average benchmark score of 20556. Its nearest rival, the Intel Arc A750, scores 20582, a delta of just -0.1%, indicating near-identical performance. The NVIDIA GeForce RTX 3070 Mobile, scoring 20534, is 0.1% behind, while the AMD Radeon R9 M390X trails by 0.5%. These comparisons suggest the B570 sits in a competitive mid-range tier, which aligns with its measured results: strong at 1080p, capable at 1440p, but out of its depth at 4K.

The 19 Gbps effective memory speed translates to 380.0 GB/s of bandwidth, which is adequate for 1080p High (96 FPS) and 1440p Medium (81 FPS) but insufficient for 4K Ultra (23 FPS). The card’s 150 W TDP and PCIe 4.0 x8 interface are consistent with its mid-range positioning. Interestingly, the B570’s DirectX 12 benchmark score of 72 is lower than its DirectX 11 score of 118, yet Outriders runs well on DX12, suggesting the game’s engine is well-optimized for this architecture. The 18 ray tracing cores are present but likely contribute little in this title, as no RT-specific benchmarks are available in the data.

FAQ

*Q: Can this combo run Outriders at 4K with acceptable performance?*

A: Only with significant settings reductions. The 4K Low preset averages 58 FPS, while Medium drops to 42 FPS with a 36 FPS minimum. High and Ultra averages of 32 FPS and 23 FPS, respectively, fall below playable thresholds for most users.

Q: What is the best resolution for this pairing?

A: 1440p offers the best balance of visual quality and performance. High settings average 61 FPS, Medium produces 81 FPS, and even Ultra maintains 44 FPS, making it the most versatile resolution for this hardware.

Q: How does the Arc B570 compare to its closest GPU rivals?

A: The B570’s average benchmark score of 20556 is effectively tied with the Intel Arc A750 (20582, -0.1% delta) and the NVIDIA GeForce RTX 3070 Mobile (20534, 0.1% delta). The AMD Radeon R9 M390X trails by 0.5%, while the Quadro M4000M is 0.4% behind.

Q: Is the Ryzen 5 7600 sufficient for this game?

A: Yes. The CPU’s 3DMark single-thread score of 999 and multi-thread score of 6503 provide ample headroom, as evidenced by the 176 FPS result at 1080p Low, which shows no CPU bottleneck.

Q: What settings should be avoided at 4K?

A: Ultra settings should be avoided entirely at 4K, as the 23 FPS average is far below playable. High settings at 32 FPS are also marginal, leaving Low (58 FPS) and Medium (42 FPS) as the only viable 4K options.

Q: How does the combo’s rank reflect its overall performance?

A: It ranks 2329 out of 2913 tested combos, placing it in the bottom 20% of all configurations. This low rank is primarily due to the GPU’s mid-range capabilities, despite the CPU’s strong showing.

How This Combo Ranks

The AMD Ryzen 5 7600 + Intel Arc B570 combination ranks 2329 out of 2913 tested combos in Outriders, placing it in the 20th percentile overall. This modest ranking is somewhat surprising given the individual component scores—the CPU ranks in the 78th percentile of all processors with an average benchmark score of 26324, while the GPU sits in the 65th percentile. The discrepancy suggests that while each part is competent in isolation, their combination in this title produces results that lag behind many other pairings.

The CPU’s nearest rivals provide context for its performance. The AMD Ryzen 9 6900HX scores 26274 (0.2% higher), the Ryzen 7 7435HS scores 26402 (0.3% lower), and the Intel Core i9-11900KF scores 26212 (0.4% higher). These tight margins indicate the 7600 is well-matched against both mobile and desktop alternatives. However, the GPU’s rivals tell a similar story, with the Arc A750 and RTX 3070 Mobile within 0.1% of the B570’s score. This suggests the combo’s low rank stems not from any single weak component, but from the overall performance tier of the pairing.

The rank of 2329 places this system in the lower-middle range of all tested configurations, which aligns with its measured FPS results. At 1080p, the combo outperforms many lower-tier systems, but at 4K it falls behind configurations with more powerful GPUs. The data indicates that users with this pairing should prioritize 1080p or 1440p gaming to maximize their experience, as high-refresh-rate 1080p is well within reach while 4K remains a stretch goal best left to higher-end hardware.

Settings Recommendations

Based on the measured FPS data, the optimal settings vary significantly by resolution, and users should adjust their expectations accordingly. At 1080p, the High preset delivers 96 FPS, which is excellent for most gaming scenarios. However, the Medium preset at 128 FPS offers a substantial boost with likely minimal visual impact in a fast-paced looter shooter. For competitive play, Low settings at 176 FPS provide the highest frame rates, though the visual trade-offs may be noticeable. The Ultra preset at 70 FPS remains playable but does not justify the performance cost over High.

At 1440p, the High preset’s 61 FPS is the recommended starting point, as it balances visual fidelity with smoothness. The Medium preset at 81 FPS is the best choice for users prioritizing frame rate, offering a 33% improvement over High with only modest visual reductions. The Low preset at 111 FPS is ideal for high-refresh-rate monitors, while Ultra at 44 FPS falls below the 60 FPS threshold and should be avoided unless visual quality is paramount.

For 4K, the recommendations are more constrained. The Low preset at 58 FPS is the only option that approaches playable frame rates, and even then, it hovers near the edge of smoothness. The Medium preset at 42 FPS with a 36 FPS minimum is borderline, potentially causing noticeable stutter during intense combat. High and Ultra settings are not recommended for 4K gameplay, as their sub-35 FPS averages will detract from the experience. Users with 4K displays should consider enabling upscaling technologies, though the data does not include such measurements.

Measured FPS Breakdown

1080p (1920x1080):

• Low: 176 FPS average — the highest frame rate achieved across all tested configurations, indicating minimal CPU or GPU bottleneck at this resolution.
• Medium: 128 FPS average, with a minimum of 109 FPS and maximum of 148 FPS — the frame time variance is acceptable for smooth gameplay.
• High: 96 FPS average — a solid 60+ FPS experience suitable for most users.
• Ultra: 70 FPS average — playable, but the performance cost over High is significant for marginal visual gains.

1440p (2560x1440):

• Low: 111 FPS average — retains high-refresh-rate capability even at the increased pixel count.
• Medium: 81 FPS average, with a minimum of 69 FPS and maximum of 93 FPS — the consistency is noteworthy, with the 24 FPS spread indicating stable performance.
• High: 61 FPS average — just above the 60 FPS threshold, making it a viable choice for quality-focused players.
• Ultra: 44 FPS average — falls below the smoothness threshold, making it a poor trade-off for visual enhancements.

4K (3840x2160):

• Low: 58 FPS average — the only 4K setting that approaches playable frame rates, though it remains below 60 FPS.
• Medium: 42 FPS average, with a minimum of 36 FPS and maximum of 49 FPS — the 13 FPS spread suggests inconsistent frame pacing during demanding scenes.
• High: 32 FPS average — a significant drop that makes gameplay feel sluggish and unresponsive.
• Ultra: 23 FPS average — effectively unplayable, with performance resembling a slideshow rather than a game.

The data across all resolutions shows a clear trend: the Arc B570 excels at 1080p, remains capable at 1440p, and struggles at 4K. The Ryzen 5 7600’s consistent performance ensures that frame rates are GPU-limited in all scenarios, meaning users cannot expect CPU overclocking or upgrades to resolve 4K deficiencies. The 1440p Medium preset stands out as the sweet spot, delivering 81 FPS with a minimum of 69 FPS, which is smooth enough for most gaming experiences while maintaining visual quality. For users with 1080p displays, the Medium preset at 128 FPS offers the best combination of performance and fidelity, with Low available for competitive play.