Outriders

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 5070 presents a mixed picture in Outriders, where the CPU’s Zen 3 architecture and the GPU’s Blackwell 2.0 design interact in ways that become clear only when isolating resolution and settings. The data shows a system that can deliver high refresh rates at mainstream resolutions but begins to show its limits as pixel count and graphical load rise, making it a combo that rewards users who understand its specific strengths.

Resolution Scaling

The measured FPS data reveals a classic pattern of GPU-bound scaling as resolution increases, but the magnitude of the drop is unusually steep. At 1080p with High settings, the combo produces 157.3 FPS, which drops to 123.8 FPS at 1440p and further to 65.5 FPS at 4K. That represents a 58.4% reduction in performance from 1080p to 4K, a significant decline that indicates the RTX 5070’s 12 GB GDDR7 memory and 192-bit bus are being pushed hard by the game’s visual effects at higher resolutions.

The scaling behavior is consistent across all settings presets. With Low settings, the system goes from 197 FPS at 1080p to 167.9 FPS at 1440p and finally 118.2 FPS at 4K. The drop from 1440p to 4K is 29.6% on Low, while on Ultra it is 49.1% (from 89.7 FPS to 45.7 FPS). This widening gap at higher settings suggests that the GPU’s shading units, 6144 in total, are the limiting factor rather than the CPU. The Ryzen 5 5600G’s 6 cores and 12 threads, which score 16758 in Cinebench R23 multicore, are unlikely to bottleneck at any resolution given that the frame rates never approach the CPU’s theoretical ceiling.

The most telling data point is the 4K Ultra result of 45.7 FPS, which is below the 60 FPS target most gamers consider playable. Even at 4K High, the 65.5 FPS average is borderline. The combo’s performance at 4K is clearly constrained by the GPU, as evidenced by the fact that dropping from Ultra to Low at 4K yields a 2.6x improvement (45.7 to 118.2 FPS). This is not a system designed for 4K gaming; it is a 1080p and 1440p machine that can occasionally dip into 4K territory with settings compromises.

GPU Role

The NVIDIA GeForce RTX 5070 is the dominant component in this pairing, and its specifications explain the observed frame rates. The GPU operates with a base clock of 2325 MHz and a boost clock of 2512 MHz, which are relatively modest figures for a high-end card, but it compensates with 48 ray tracing cores and 192 tensor cores. The 12 GB of GDDR7 memory on a 192-bit bus provides 672.0 GB/s of bandwidth, which is substantial but not exceptional for the resolution demands of Outriders.

The GPU’s 30.87 TFLOPS of FP32 performance places it in a strong position for rasterized games. In the Passmark G3D benchmark, the RTX 5070 scores 29137, which places it in the 83rd percentile of all GPUs. Its nearest rival in the data is the NVIDIA GeForce RTX 3090, which scores 41441 in the average benchmark score, with a deltaPct of 0.6%. This means the RTX 5070 is effectively on par with the RTX 3090 in raw compute, but the newer card’s 5 nm process node and Blackwell 2.0 architecture offer efficiency gains that the older card cannot match.

The GPU’s role becomes clearer when comparing the 1080p Low result of 197 FPS to the 4K Low result of 118.2 FPS. The 40% drop from 1080p to 4K at Low settings is entirely attributable to the GPU’s pixel fill rate and memory bandwidth. The RTX 5070’s pixel rate of 201.0 GPixel/s and texture rate of 482.3 GTexel/s are being saturated at 4K, whereas at 1080p these resources are more than sufficient. The data indicates that the GPU is the limiting component across all measured settings, with the CPU contributing little to the performance ceiling.

Settings Recommendations

The measured data provides clear guidance on which settings preset delivers the best experience for this combo. At 1080p, the High preset produces 157.3 FPS, which is a 14.2% improvement over Ultra’s 137.7 FPS while maintaining visual fidelity that most players would find acceptable. The jump from High to Ultra at 1080p costs 12.5% performance, which is a poor trade for the marginal visual gains in a looter shooter where fast action matters more than pixel-perfect shadows.

At 1440p, the High preset is the clear winner with 123.8 FPS. This is comfortably above the 60 FPS threshold and provides a smooth experience on high refresh rate monitors. The Medium preset offers 147.4 FPS, which is 19.1% faster than High, but the visual downgrade is noticeable in a game that relies on particle effects and environmental detail. Ultra at 1440p drops to 89.7 FPS, which is still playable but leaves no headroom for demanding combat scenarios.

For 4K, the data suggests that only Low settings are viable, with 118.2 FPS. The Medium preset at 4K produces 85.9 FPS, which is acceptable for casual play, but High and Ultra fall below 66 FPS. Players targeting 4K should stick to Low or Medium presets, as the 45.7 FPS Ultra result is not suitable for a game requiring quick reflexes. The optimal configuration for most users is 1440p High, which balances the GPU’s capabilities with the CPU’s headroom.

FAQ

*Q: Can this combo run Outriders at 4K 60 FPS?*

A: Only with significant settings compromises. The measured data shows 118.2 FPS at 4K Low and 85.9 FPS at 4K Medium, but High drops to 65.5 FPS and Ultra falls to 45.7 FPS, meaning 60 FPS is achievable only on Low or Medium.

Q: Is the Ryzen 5 5600G bottlenecking the RTX 5070 in this game?

A: No. The frame rates scale predictably with resolution and settings, indicating the GPU is the limiting factor. The CPU’s Cinebench R23 multicore score of 16758 is sufficient to feed the GPU at all measured settings.

Q: What is the best resolution for this combo?

A: 2560x1440 with High settings yields 123.8 FPS, which is the sweet spot. This resolution provides a 49.1% performance improvement over 4K High while maintaining high visual quality.

Q: How does the RTX 5070 compare to the RTX 3090 in this context?

A: The RTX 5070 has an average benchmark score of 41687 versus 41441 for the RTX 3090, a deltaPct of 0.6%, meaning the newer card is slightly faster overall despite having fewer resources.

*Q: Is the 12 GB VRAM sufficient for Outriders?*

A: Yes, the measured results do not indicate VRAM limitations. The 12 GB GDDR7 memory on a 192-bit bus provides 672.0 GB/s bandwidth, which is adequate for all tested resolutions and settings.

Q: What frame rate can I expect at 1080p with maximum settings?

A: The Ultra preset at 1080p produces 137.7 FPS, which is 12.5% lower than High but still well above the 100 FPS mark for competitive play.

How This Combo Ranks

The AMD Ryzen 5 5600G + NVIDIA GeForce RTX 5070 combination ranks 484th out of 1693 tested combos in Outriders, placing it in the 71.4th percentile of all systems tested. This is a strong result that puts the combo ahead of roughly 71% of all configurations, but it is not among the elite performers. The rank reflects the balance between the CPU’s 78th percentile ranking among all processors and the GPU’s 83rd percentile among all graphics cards.

The CPU’s nearest rivals in the benchmark database are the Intel Core i7-11600H and the AMD Ryzen Threadripper PRO 5995WX, with deltaPct values of 0.2% and 0.3% respectively. This means the Ryzen 5 5600G is statistically tied with these processors, despite the Threadripper being a workstation-class chip. The GPU’s nearest rival is the NVIDIA Tesla M40 with a deltaPct of -0.5%, indicating the RTX 5070 is 0.5% slower than that professional card, but 0.6% faster than the RTX 3090.

The combo’s rank of 484 suggests that while the individual components are well-matched, there are other combinations that extract more performance in Outriders. The data indicates that the RTX 5070 is the stronger component, and pairing it with a higher-end CPU could yield better results in CPU-bound scenarios, though the current pairing shows no such bottleneck. For a 1080p and 1440p gaming setup, this rank represents a capable system that delivers excellent frame rates in the most common gaming resolutions.