Outriders

The AMD Ryzen 5 3600 paired with the Intel Arc B570 delivers a playable but not spectacular experience in Outriders, with performance scaling that clearly exposes the GPU as the primary bottleneck at higher resolutions. The data shows a system that can push high refresh rates at 1080p but struggles to maintain playable frame rates at 4K, making it a solid choice for 1080p and entry-level 1440p gaming rather than a high-resolution powerhouse.

Resolution Scaling

The measured frame rates show a steep and consistent drop as resolution increases, which is the classic signature of a GPU-bound scenario. At 1080p with High settings, the combo averages 96 FPS, which is smooth for a looter shooter. Moving to 1440p High drops that to 61 FPS, a 36% reduction, and then 4K High plummets to 32 FPS, a further 48% cut from the 1440p result. This pattern indicates that the Arc B570’s rendering throughput is the limiting factor; the CPU has enough headroom to feed the GPU at lower resolutions, but the GPU’s pixel fill rate and memory bandwidth become overwhelmed as pixel count increases.

The scaling from Low to Ultra settings at each resolution reinforces this. At 1080p, the difference between Low (158 FPS) and Ultra (70 FPS) is massive, a 56% performance hit, showing that the GPU is heavily taxed by the higher graphical load. At 1440p, the same settings span from 111 FPS (Low) down to 44 FPS (Ultra), a 60% drop. At 4K, the range narrows to 58 FPS (Low) and 23 FPS (Ultra), a 60% drop as well, but the absolute numbers are so low that even the Low preset barely hits 60 FPS.

This data suggests that for a 60 FPS target, you are essentially limited to 1080p at any preset, or 1440p only if you drop to Low settings. The 4K results are uniformly poor, with even the best case (Low) averaging 58 FPS, which is borderline, and the Ultra preset at 23 FPS being unplayable for a fast-paced action game. The consistent ~60% performance penalty from Low to Ultra across all resolutions indicates that the GPU’s compute and memory subsystems are saturated, and the CPU is not the primary constraint in these tests.

CPU Role

The Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, running at a base clock of 3.60 GHz and a boost clock of 4.20 GHz. Its benchmark scores place it in the 71st percentile of all CPUs, with an average benchmark score of 17035. This is a mid-range performer by modern standards, but for Outriders, the data suggests it is sufficient to avoid being the main bottleneck at the tested settings.

Looking at the CPU’s synthetic benchmarks, its multi-threaded performance is respectable: Cinebench R23 multi-core scores 15045, and Geekbench multi-core scores 7372. Single-thread performance is more modest, with Cinebench R23 single-core at 2124 and Geekbench single-core at 1536. Outriders is a game that benefits from multiple cores, but the fact that frame rates drop so dramatically with resolution and settings indicates that the GPU is the limiting factor, not the CPU.

The nearest rivals for the Ryzen 5 3600, based on average benchmark scores, include the Intel Core i5-11400 (deltaPct -0.2%) and the Intel Core i7-1260P (deltaPct 0.2%). This means the 3600 is essentially on par with those processors in overall compute performance. In practice, this level of CPU performance is adequate to drive the Arc B570 at 1080p, as evidenced by the 158 FPS result at Low settings, which suggests the CPU can feed the GPU well beyond the GPU’s limits at that resolution. At 4K, the CPU is even less relevant, as the GPU is clearly the constraint.

The CPU’s 32 MB of shared L3 cache and dual-channel DDR4 memory support at 51.2 GB/s are adequate for gaming, but the data does not indicate any specific Outriders-related CPU bottleneck. The fact that the 1080p Low preset achieves 158 FPS while the 4K Low preset drops to 58 FPS is a clear indication that the GPU’s workload scales with resolution, while the CPU’s workload remains relatively constant, further confirming that the Ryzen 5 3600 is not the limiting component in this configuration.

GPU Role

The Intel Arc B570 is the clear performance driver in this combo, and its specifications explain the scaling behavior observed. It features 10 GB of GDDR6 memory on a 160-bit bus, providing a bandwidth of 380.0 GB/s. Its base and boost clocks are both 2500 MHz, and it has 2304 shading units, 144 TMUs, and 80 ROPs. The GPU’s synthetic benchmarks place it in the 65th percentile of all GPUs, with an average benchmark score of 20556, putting it in the company of the Intel Arc A750 (deltaPct -0.1%) and the NVIDIA GeForce RTX 3070 Mobile (deltaPct 0.1%).

The GPU’s memory configuration is likely a contributing factor to its performance drop at 4K. With 10 GB of VRAM, Outriders at 4K Ultra may approach or exceed that capacity, forcing the GPU to rely on slower system memory, which would explain the 23 FPS result at that setting. Even at 4K High, the 32 FPS average suggests the GPU is struggling with the pixel count and memory bandwidth requirements. The 380.0 GB/s bandwidth is sufficient for 1080p and 1440p, where the data shows respectable performance, but it becomes a limiting factor at 4K.

The GPU’s compute capabilities, rated at 11.52 TFLOPS FP32, are moderate for a modern card. The data shows that at 1080p High, the combo achieves 96 FPS, which is a good result, but at 4K High, it drops to 32 FPS, indicating that the GPU’s raw throughput is insufficient for 4K rendering with high-quality settings. The fact that the 4K Low preset (58 FPS) is nearly double the 4K High preset (32 FPS) suggests that reducing the graphical load significantly improves performance, but even then, it barely reaches 60 FPS.

The GPU’s nearest rivals in the benchmark database include the Arc A750, which is a slightly higher-tier card, and the RTX 3070 Mobile, a laptop GPU. The Arc B570’s average score is within 0.1% of both, indicating that it performs similarly to those products in synthetic tests. In Outriders, the measured results are consistent with a mid-range GPU that can handle 1080p and 1440p gaming but is not suited for 4K.

How This Combo Ranks

In the database of tested combinations, this pairing of the Ryzen 5 3600 and the Intel Arc B570 ranks 2389 out of 2913 combos for Outriders. This places it in the bottom 18% of all tested systems, which is a poor showing relative to the broader database. However, it is important to note that this ranking includes combos with much more powerful CPUs and GPUs, so the absolute position is expected to be low for a mid-range configuration.

The combo’s rank suggests that while the individual components are not top-tier, the pairing is not particularly synergistic for this game either. The CPU is capable, as evidenced by its 71st percentile ranking, but the GPU’s 65th percentile ranking is the weaker link. The measured FPS data confirms this: at 1080p, the system performs well, but at 4K, it falls below the 60 FPS threshold that is generally considered necessary for a smooth experience in a looter shooter.

Compared to other combos in the database, this system is likely to be outpaced by configurations with higher-tier GPUs, such as those with the Arc A750 or RTX 3070 Mobile, which have similar CPU performance but better GPU headroom. The deltaPct values for the GPU’s nearest rivals show that the Arc B570 is within 0.5% of those products in synthetic tests, but in real-world gaming, the 10 GB VRAM and 160-bit bus may cause it to fall further behind at higher resolutions. The combo’s low rank is a reflection of this GPU limitation rather than a CPU deficiency.

Settings Recommendations

Based on the measured frame rates, the optimal settings for this combo depend heavily on the target resolution and desired frame rate. For 1080p gaming, the data shows that High settings (96 FPS) provide a smooth experience, but Medium (128 FPS) is even better if you want to push refresh rates higher on a 144Hz monitor. The Low preset (158 FPS) is excessive for most displays and offers no practical benefit unless you are using a very high refresh rate panel. Ultra (70 FPS) is playable but not ideal, as the drop from High is significant.

For 1440p, the situation is more constrained. High settings (61 FPS) are just above the 60 FPS threshold, making it a viable option for a 60Hz monitor, but you will see occasional dips. Medium (81 FPS) is the sweet spot, providing a comfortable margin above 60 FPS while maintaining good visual quality. Low (111 FPS) is the best choice for competitive play or high refresh rate monitors, but it sacrifices visual fidelity. Ultra (44 FPS) is not recommended, as it falls below the playable threshold for a fast-paced game.

At 4K, none of the presets deliver a consistently smooth experience. Low (58 FPS) is the only option that approaches 60 FPS, but it will likely have noticeable frame pacing issues. Medium (42 FPS) and High (32 FPS) are both too slow for comfortable play, and Ultra (23 FPS) is unplayable. Given this data, the best recommendation is to avoid 4K with this combo entirely, or if you must, use the Low preset and accept the compromises. For the best overall experience, 1080p Medium or 1440p Medium are the recommended settings, as they balance frame rate and visual quality without overtaxing the GPU.

FAQ

Q: What is the best resolution to play Outriders with this CPU and GPU combo?

A: The data shows that 1080p and 1440p are the viable options. At 1080p Medium, the combo averages 128 FPS, and at 1440p Medium, it averages 81 FPS. Both provide smooth gameplay, but 4K results are poor, with even the Low preset only reaching 58 FPS.

Q: How does the Arc B570 perform at 4K in Outriders?

A: The 4K results are consistently low. The best case is the Low preset at 58 FPS, but Medium drops to 42 FPS, High to 32 FPS, and Ultra to 23 FPS. This indicates the GPU is not suitable for 4K gaming in this title.

Q: Is the Ryzen 5 3600 a bottleneck for the Arc B570 in this game?

A: No, the data suggests the CPU is not the limiting factor. The frame rates drop significantly with resolution and settings, which is a GPU-bound pattern. The CPU’s performance is sufficient to drive the GPU at 1080p, as evidenced by the 158 FPS result at Low settings.

Q: What is the best settings preset for a 60 FPS target?

A: For a 60 FPS target, the data recommends 1080p Ultra (70 FPS) or 1440p High (61 FPS). At 1080p, even Ultra is playable, but at 1440p, High is the highest preset that stays above 60 FPS. For a more comfortable margin, 1080p High (96 FPS) or 1440p Medium (81 FPS) are better choices.

Q: How does this combo rank compared to other tested systems?

A: This combo ranks 2389 out of 2913 tested combinations for Outriders, placing it in the bottom 18% of the database. This is primarily due to the GPU’s limitations at higher resolutions, despite the CPU being a capable mid-range performer.

Q: Should I use the Low preset to improve performance?

A: The Low preset significantly boosts frame rates, especially at 1080p (158 FPS) and 1440p (111 FPS). However, it sacrifices visual quality. The data shows that Medium provides a better balance, with 128 FPS at 1080p and 81 FPS at 1440p, making it a more sensible choice for most users.