Minimum

The AMD Ryzen 7 5700 and NVIDIA GeForce RTX 5060 combination delivers a mid-pack result in Minimum, ranking 866th out of 1,733 tested combos. Measured frame rates range from 215.6 FPS at 1080p Low to 37.5 FPS at 4K Ultra, showing a clear GPU-bound scaling pattern as resolution increases. The CPU’s strong multi-threaded scores and the GPU’s 8 GB GDDR7 memory position this combo as a capable 1080p and 1440p performer, while 4K requires reduced settings to stay playable.

CPU Role

The AMD Ryzen 7 5700 is an 8-core, 16-thread processor based on the Zen 3 architecture (Cezanne) on a 7 nm process. It runs at a base clock of 3.70 GHz and boosts to 4.60 GHz, with a 65 W TDP. Its benchmark results are strong for a desktop chip: Cinebench R23 multi-core scores 20,655, single-core 2,916, and PassMark multi-thread reaches 24,303. The CPU sits in the 84th percentile of all tested processors, with an average benchmark score of 27,220. Its nearest rivals are the Intel Core i9-9900K (0.7% higher), Intel Core i7-12700H (0.8% higher), Intel Core i7-1370P (0.8% higher), and AMD Ryzen AI 5 340 (1.2% higher) — all within a narrow margin, indicating the 5700 is competitive with those parts in general compute.

In Minimum, the CPU’s role is most evident at low resolutions and low settings. At 1080p Low, the combo reaches 215.6 FPS, a figure that suggests the CPU can feed the GPU well beyond typical display refresh rates. At 1080p Ultra, the frame rate drops to 104.6 FPS, still high, but the drop from Low to Ultra (215.6 to 104.6) is a 48% reduction, which points to the GPU becoming more involved as settings increase. The CPU’s 16 threads and high boost clock are sufficient to avoid bottlenecking the RTX 5060 at 1080p, as evidenced by the fact that the frame rate scales almost linearly with resolution (see Resolution Scaling). The launch MSRP for the CPU is $179.

How This Combo Ranks

The combo ranks 866th out of 1,733 tested combinations in Minimum, placing it at roughly the 50th percentile of all tested systems. This is a mid-pack result, but it is important to note that the CPU and GPU individually rank higher: the CPU is in the 84th percentile of all CPUs, and the GPU is in the 73rd percentile of all GPUs. The gap between component percentiles and the combo rank suggests that Minimum is not purely CPU- or GPU-bound; rather, the game’s engine and the specific combination of this CPU and GPU produce a result that is lower than either component’s standalone standing would imply. The GPU’s nearest rivals — the AMD Radeon RX 7700 XT (0% delta), AMD Radeon RX 570 (-0.2%), NVIDIA Tesla M60 (0.5%), and NVIDIA GeForce RTX 5070 Mobile (0.6%) — are all within 0.6% of the RTX 5060’s average benchmark score of 30,109, so the GPU is not an outlier. The CPU’s nearest rivals are also within 1.2%. The mid-pack rank is therefore a game-specific outcome, not a reflection of weak components.

Resolution Scaling

The measured FPS data shows a consistent pattern across all four settings: as resolution increases from 1080p to 1440p to 4K, frame rates drop by roughly 35% and then another 46% (relative to the previous step). For example, at High settings, the combo delivers 136.3 FPS at 1080p, 88.2 FPS at 1440p (a 35.3% drop), and 47.4 FPS at 4K (a 46.3% drop from 1440p). At Low settings, the numbers are 215.6, 137.6, and 71.6 FPS, with drops of 36.2% and 48.0%. At Medium, 163.8, 107, and 56.7 FPS (34.7% and 47.0% drops). At Ultra, 104.6, 66.3, and 37.5 FPS (36.6% and 43.4% drops). This near-linear scaling with pixel count indicates that the GPU is the limiting component at all resolutions; the CPU is not holding back performance. The fact that the percentage drops are similar across settings reinforces that the bottleneck is the GPU’s rendering throughput, not the CPU’s ability to feed it. At 4K, even Low settings only reach 71.6 FPS, while Ultra drops to 37.5 FPS, showing that the RTX 5060’s 8 GB VRAM and 128-bit memory bus are adequate for 1080p and 1440p but struggle at 4K with high detail.

FAQ

Q: What is the best settings preset for 60 FPS at 4K?

A: At 3840x2160, only Low settings achieve an average above 60 FPS (71.6 FPS). Medium yields 56.7 FPS, High 47.4, and Ultra 37.5. To maintain 60 FPS at 4K, Low is the only viable preset.

Q: Can this combo handle 1440p at Ultra settings?

A: Yes. At 2560x1440, Ultra settings produce an average of 66.3 FPS, which is above 60. High settings reach 88.2 FPS, Medium 107, and Low 137.6, so all presets are playable at 1440p.

Q: How does the CPU compare to its nearest rivals in general benchmarks?

A: The Ryzen 7 5700’s average benchmark score is 27,220, which is 0.7% lower than the Intel Core i9-9900K, 0.8% lower than the Intel Core i7-12700H and i7-1370P, and 1.2% lower than the AMD Ryzen AI 5 340. All four rivals are within 1.2% of the 5700, indicating near-identical general performance.

Q: What is the GPU’s memory configuration and how does it affect performance?

A: The RTX 5060 has 8 GB of GDDR7 memory on a 128-bit bus, with a bandwidth of 448.0 GB/s. This configuration is sufficient for 1080p and 1440p in Minimum, but at 4K Ultra the frame rate drops to 37.5 FPS, suggesting the memory capacity or bandwidth becomes a limiting factor at higher resolutions.

Q: Is the CPU or GPU the bottleneck in this game?

A: The resolution scaling data shows that frame rates drop proportionally with pixel count, which is characteristic of a GPU-bound scenario. The CPU’s high multi-threaded scores (e.g., Cinebench R23 multi-core 20,655) and the fact that 1080p Low reaches 215.6 FPS indicate the CPU is not the limiting component.

Q: How does this combo rank among all tested systems?

A: It ranks 866th out of 1,733 combos, placing it in the middle of the distribution. The CPU and GPU individually rank in the 84th and 73rd percentiles, respectively, so the game-specific rank is lower than either component’s standalone standing.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture (GB206 chip) using a 5 nm process. It has 3,840 shading units, 120 TMUs, and 48 ROPs, with base and boost clocks of 2280 MHz and 2497 MHz. The memory runs at 1750 MHz (28 Gbps effective) across a 128-bit bus, yielding 448.0 GB/s of bandwidth. The GPU’s benchmark scores include a PassMark G3D score of 20,891 and a Geekbench OpenCL score of 120,785. It sits in the 73rd percentile of all GPUs, with an average benchmark score of 30,109. Its nearest rivals are the AMD Radeon RX 7700 XT (0% delta), AMD Radeon RX 570 (-0.2%), NVIDIA Tesla M60 (0.5%), and NVIDIA GeForce RTX 5070 Mobile (0.6%) — all within 0.6% of the RTX 5060’s average score. The launch MSRP for the GPU is 299 USD.

In Minimum, the GPU’s role is dominant. The frame rate at 1080p Low (215.6 FPS) is high, but as settings and resolution increase, the GPU’s workload grows. At 4K Ultra, the combo manages only 37.5 FPS, which is below the 60 FPS threshold. The 8 GB VRAM is likely a factor at 4K with high textures, but the consistent scaling across settings suggests the GPU’s compute throughput is the primary constraint. The RTX 5060’s 48 ROPs and 128-bit memory bus are modest for a 4K card, and the data confirms that 1440p is the practical ceiling for high-detail play.

Settings Recommendations

Based on the measured FPS rows, the optimal preset depends on the target resolution and frame rate. For 1080p, all four presets exceed 100 FPS, with Ultra at 104.6 FPS, so players can use Ultra without sacrificing smoothness. At 1440p, Ultra delivers 66.3 FPS, which is above 60, making it the best choice for visual quality while maintaining playability; High (88.2 FPS) offers a higher margin for demanding scenes. At 4K, only Low reaches 60 FPS (71.6 FPS); Medium (56.7 FPS) is close but below 60, and High/Ultra are not recommended for a consistent experience. For a 60 FPS target, the best experience per resolution is: 1080p Ultra, 1440p Ultra, and 4K Low. If a higher frame rate is desired, dropping to High at 1440p or Medium at 1080p yields 88.2 and 163.8 FPS respectively.

Measured FPS Breakdown

The following table lists all measured average FPS values for the AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5060 combo in Minimum:

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 | High | 47.4 |

| 3840x2160 | Low | 71.6 |

| 3840x2160 | Medium | 56.7 |

| 3840x2160 | Ultra | 37.5 |

| 2560x1440 | High | 88.2 |

| 2560x1440 | Low | 137.6 |

| 2560x1440 | Medium | 107.0 |

| 2560x1440 | Ultra | 66.3 |

| 1920x1080 | High | 136.3 |

| 1920x1080 | Low | 215.6 |

| 1920x1080 | Medium | 163.8 |

| 1920x1080 | Ultra | 104.6 |

These numbers show a clear hierarchy: at each resolution, Low is the fastest, followed by Medium, High, and Ultra. The gap between Low and Ultra is substantial — at 1080p, the difference is 111 FPS (215.6 vs 104.6), and at 4K it is 34.1 FPS (71.6 vs 37.5). The data also confirms that the combo is capable of high refresh rates at 1080p and solid 60+ FPS at 1440p, but 4K requires the lowest preset to stay above 60 FPS.