Microsoft Flight Simulator
This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 16 | 16 | 22 |
| 1440p QHD | 19 | 20 | 22 | 30 |
| 1080p Full HD | 23 | 22 | 29 | 37 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Microsoft Flight Simulator with Intel Core i7-14700K + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
Microsoft Flight Simulator presents one of the most demanding workloads in PC gaming, and the pairing of the Intel Core i7-14700K with the NVIDIA GeForce GTX 1050 Ti creates a stark contrast in capabilities. The benchmark data reveals a system where the processor is not the limiting factor; instead, the legacy GPU constrains performance to levels that are often below playable thresholds. The following analysis details how these components interact based strictly on the measured results.
CPU Role — cores, clocks, and how they relate to this game's results
The Intel Core i7-14700K is a 20-core, 28-thread processor based on the Raptor Lake architecture, with a base clock of 3.40 GHz and a boost clock of 5.60 GHz. This is a high-end desktop part with a 125 W TDP, and its benchmark scores place it in the 96th percentile against all CPUs. In multi-core workloads like Cinebench R23, it scores 44534, while its single-core score of 6287 indicates strong per-thread performance. These figures suggest the CPU has ample headroom for simulation tasks, which often rely on single-threaded physics and complex scenery calculations.
However, the measured FPS in Microsoft Flight Simulator shows a different story. At 1080p with Low settings, the combo achieves 36.7 FPS, but this is not due to CPU limitations. The i7-14700K’s nearest rivals in synthetic benchmarks include the Intel Core i7-14700KF with a deltaPct of 0, and the AMD Ryzen 9 9950X which is 0.5% slower. This places the CPU in a performance tier far above what the GPU can utilize. The data indicates that the CPU is essentially idle relative to the GPU bottleneck, as even at the lowest resolution and settings, the FPS remains low compared to what this CPU could deliver in a balanced system. The processor’s role here is to provide a stable foundation, but its potential is unrealized because the graphics card cannot translate that compute power into frame rate.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce GTX 1050 Ti is the constraining factor in this pairing. It features 4 GB of GDDR5 memory on a 128-bit bus, with a bandwidth of 112.1 GB/s. Its base clock is 1291 MHz, boosting to 1392 MHz, and it is built on the 14 nm Pascal architecture. The GPU’s benchmark performance is modest, with a passmark G3D score of 6340 and a percentile rank of only 30 against all GPUs. Its nearest rivals in synthetic tests are the NVIDIA GeForce 930A (deltaPct 0) and the AMD Radeon R7 240 (deltaPct 0.7), which are entry-level parts from previous generations.
In the context of Microsoft Flight Simulator, the GPU’s 4 GB VRAM is a critical limitation. The game’s high-resolution textures and detailed terrain require substantial memory, and the data shows that at 4K Ultra settings, the combo only averages 15 FPS. The GTX 1050 Ti’s 2.138 TFLOPS of FP32 performance is insufficient for the game’s rendering demands. Even at 1080p Low, the GPU produces 36.7 FPS, which is below the 60 FPS target for smooth flight simulation. The GPU’s end-of-life production status and its performance percentile indicate it is a legacy part struggling with a modern, demanding title.
How This Combo Ranks — use comboRankInGame vs other tested combos
The measured performance of this specific CPU-GPU combination is exceptionally poor relative to other tested systems. The combo ranks 1791 out of 1795 tested combinations, placing it in the bottom 0.2% of all configurations. This rank is driven almost entirely by the GPU, as the CPU’s high synthetic scores do not translate to in-game performance when paired with such a weak graphics card. The data shows that this is one of the most underperforming combos in the database, with only four other combinations scoring lower.
This ranking highlights a severe imbalance. While the i7-14700K is in the 96th percentile for CPU performance, the GTX 1050 Ti sits in the 30th percentile for GPUs. The combo’s rank of 1791 out of 1795 reflects the GPU’s dominance in dictating the final FPS. In practical terms, this system would be outclassed by nearly any modern mid-range GPU paired with a weaker CPU, as the bottleneck is so pronounced. The data suggests that users of this combo would see virtually no benefit from the powerful processor in this game, as the graphics card cannot keep up.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a detailed view of performance across resolutions and settings. At 1920x1080, the best result is 36.7 FPS on Low settings, which drops to 28.7 FPS on Medium, 22.4 FPS on High, and 22.7 FPS on Ultra. Notably, the Ultra preset performs slightly better than High, which is unusual and may indicate variability in the test. Moving to 2560x1440, the Low setting yields 30.3 FPS, Medium drops to 21.9 FPS, High to 20.1 FPS, and Ultra to 19.3 FPS. At 4K (3840x2160), performance falls further: Low achieves 21.9 FPS, High 15.8 FPS, Medium 15.5 FPS, and Ultra 15 FPS.
These numbers show a clear pattern: even at the lowest settings, the system cannot maintain 40 FPS at any resolution. The 1080p Low result of 36.7 FPS is the only figure above 30 FPS, and it is still below the standard for a smooth experience. The gap between Low and Ultra at 1080p is 14 FPS, but at 4K the gap shrinks to just 6.9 FPS, indicating that resolution scaling has a more significant impact than settings at higher pixel counts. The data confirms that the GPU is the primary constraint, as raising resolution reduces FPS consistently.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The impact of resolution scaling is evident when comparing the same settings across different resolutions. For Low settings, the FPS drops from 36.7 at 1080p to 30.3 at 1440p and then to 21.9 at 4K. This represents a 40.3% reduction from 1080p to 4K. For Ultra settings, the drop is from 22.7 at 1080p to 19.3 at 1440p and 15.0 at 4K, a 33.9% reduction. These percentages show that the GPU is heavily strained by higher resolutions, as the number of pixels increases fourfold from 1080p to 4K, but the FPS does not drop proportionally.
This pattern is characteristic of a GPU bottleneck. If the CPU were the limiting factor, the FPS would remain relatively constant across resolutions, as the processor’s workload does not scale with pixel count. Instead, the FPS decreases significantly, indicating that the GTX 1050 Ti’s rendering pipeline is saturated. The 4K Low result of 21.9 FPS is nearly identical to the 1440p Medium result of 21.9 FPS, suggesting that the GPU is reaching a performance ceiling where additional pixels or settings have diminishing returns. This analysis confirms that the GPU is the sole limiting component, and the CPU’s capabilities are not being exercised.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured data, the optimal settings for this combo are at 1080p with the Low preset, which yields 36.7 FPS. This is the only configuration that approaches playability, though it is still below the 40 FPS threshold for a comfortable experience. The Medium preset at 1080p offers 28.7 FPS, which is a noticeable drop and may cause stuttering in a flight simulator where smooth visuals are critical. The High and Ultra presets at 1080p provide 22.4 and 22.7 FPS, respectively, which are too low for consistent gameplay.
At higher resolutions, the data shows that even Low settings are not viable. The 1440p Low result of 30.3 FPS is marginal, but the 4K Low result of 21.9 FPS is not playable. Therefore, the recommendation is to run the game at 1080p with Low settings, as this provides the highest average FPS. If the user prioritizes visual quality over frame rate, the Medium preset at 1080p is the second-best option, but the performance penalty is substantial. The data does not support using any settings above Low at 1080p, as the frame rate drops below 30 FPS, which is generally considered the minimum for a playable flight simulator. For users with this hardware, the measured results indicate that compromising on resolution and settings is necessary to achieve a playable experience, and even then, the performance is marginal.
Hardware Specifications
Intel Core i7-14700K
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700K + NVIDIA GeForce GTX 1050 Ti in Microsoft Flight Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 21.9 |
| 3840x2160 | High | 15.8 |
| 3840x2160 | Medium | 15.5 |
| 3840x2160 | Ultra | 15.0 |
| 2560x1440 | Low | 30.3 |
| 2560x1440 | Medium | 21.9 |
| 2560x1440 | High | 20.1 |
| 2560x1440 | Ultra | 19.3 |
| 1920x1080 | Low | 36.7 |
| 1920x1080 | Medium | 28.7 |
| 1920x1080 | Ultra | 22.7 |
| 1920x1080 | High | 22.4 |
Microsoft Flight Simulator with ii7-14700K + Other GPUs
See how Microsoft Flight Simulator performs with the same CPU but different graphics cards.
Microsoft Flight Simulator with GTX 1050 Ti + Other CPUs
See how Microsoft Flight Simulator performs with the same GPU but different processors.
Other Games with ii7-14700K + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.