Microsoft Flight Simulator
This combination may struggle with this title, averaging 23 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 14 | 18 | 23 |
| 1440p QHD | 17 | 18 | 24 | 31 |
| 1080p Full HD | 22 | 23 | 30 | 39 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Microsoft Flight Simulator with AMD Ryzen 5 7400F + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
Microsoft Flight Simulator is a notoriously demanding title, and the measured results for the AMD Ryzen 5 7400F paired with the NVIDIA GeForce GTX 1050 Ti place this combination in a very specific, challenging position. The data reveals a system that is fundamentally constrained by its graphics card, with the CPU showing it is capable of far more than the GPU can deliver. This analysis breaks down the benchmark results, exploring how the components interact across resolutions and settings, and what this means for the overall experience.
Resolution Scaling
The performance drop from 1080p to 4K is stark and definitive in identifying the bottleneck. At 1920x1080 with Low settings, the combo achieves an average of 39 FPS. Moving to 2560x1440 at the same settings, the average falls to 31 FPS, a reduction of 8 FPS. The most dramatic collapse occurs when pushing to 3840x2160, where the average plummets to just 23 FPS. This represents a 41% decrease in performance from 1080p to 4K, a scaling pattern that heavily implicates the GPU as the limiting factor. A system that is CPU-bound would typically show a much smaller performance gap between these resolutions, as the workload on the processor remains relatively constant while the pixel count increases.
The trend continues across all settings presets. With High settings, the frame rate drops from 23 FPS at 1080p to 18 FPS at 1440p, and finally to 14 FPS at 4K. The Ultra preset shows a similar trajectory, starting at 22 FPS at 1080p, dipping to 17 FPS at 1440p, and bottoming out at 13 FPS at 4K. These figures suggest that the GTX 1050 Ti is being overwhelmed by the sheer pixel throughput required at higher resolutions. The data implies that the rendering pipeline is saturated, and the GPU's limited processing power is the primary reason for the inability to maintain playable frame rates as resolution increases. The Ryzen 5 7400F, with its high single-core performance, is essentially waiting for the GPU to finish its work, making the graphics card the sole arbiter of performance in this configuration.
GPU Role
The NVIDIA GeForce GTX 1050 Ti is an older, entry-level graphics card, and its specifications clearly explain the performance ceiling observed. Its 4 GB of GDDR5 memory on a 128-bit bus provides a bandwidth of 112.1 GB/s, which is a significant limitation for a game like Microsoft Flight Simulator that streams vast amounts of terrain and scenery data. The GPU's 768 shading units and 32 ROPs are tasked with all the rasterization work, and its 2.138 TFLOPS of FP32 compute power is modest by modern standards. The core clock speeds are listed as a base of 1291 MHz and a boost of 1392 MHz, which are relatively low, further limiting its throughput. The data shows that the GPU's 25th percentile ranking among all GPUs places it far below the average, confirming its position as a low-performance part.
The benchmark results reflect these hardware constraints. The 3DMark Steel Nomad DX12 score of 305 and a Passmark G3D score of 6340 are indicative of a GPU that struggles with modern, demanding titles. In this game, the GPU's role is the primary bottleneck. The measured FPS data shows that even at 1080p with Low settings, the system only manages 39 FPS, which is not a smooth experience for a flight simulator that requires precise control. The GPU's limitations are most apparent at 4K, where the average FPS falls into the low teens, making the game essentially unplayable. The VRAM capacity is also a concern; 4 GB is insufficient for high-resolution textures, likely causing the system to rely on slower system memory, which can lead to stuttering and frame drops, although this is not directly measurable from the provided average FPS data.
How This Combo Ranks
The combination of the Ryzen 5 7400F and GTX 1050 Ti ranks at 2968 out of 2996 tested combos for this game, placing it in the bottom 1% of all configurations. This is a remarkably low ranking that underscores the severe imbalance of this pairing for Microsoft Flight Simulator. The data shows that this system is near the very bottom of the performance pile, with only 28 other combinations performing worse. This ranking is not a reflection of the CPU, which is a modern and capable processor, but a direct consequence of the GPU's inability to keep pace with the game's demands. The combination is so heavily GPU-limited that the powerful CPU is rendered nearly irrelevant in this specific context.
In contrast, the CPU itself is a strong performer. Its average benchmark score of 32750 places it in the 83rd percentile of all CPUs, and it sits just 0.1% ahead of the Intel Core i5-14600T in average score. This indicates that the Ryzen 5 7400F is more than capable of handling the complex simulation and physics calculations in the game. The problem is that the GPU cannot translate that CPU capability into high frame rates. The combo's rank confirms how a weak GPU can drag down an otherwise strong system. The data suggests that if this CPU were paired with a more powerful graphics card, its ranking would be dramatically higher. The current rank is a clear indication that the GTX 1050 Ti is the single greatest limiting factor in this build.
Measured FPS Breakdown
The measured FPS data provides a comprehensive look at the system's performance across the board. At 1920x1080, the results are as follows: Low settings yield an average of 39 FPS, Medium settings produce 30 FPS (with a minimum of 26 and a maximum of 35), High settings drop to 23 FPS, and Ultra settings bring the average down to 22 FPS. These numbers show a clear and expected progression, where higher graphical fidelity demands more from the GPU, resulting in lower frame rates. The difference between High and Ultra is minimal (a single FPS), suggesting that the Ultra preset may introduce settings that the GPU cannot efficiently process, resulting in a negligible visual gain for a small performance cost.
Moving to 2560x1440, the performance takes a significant hit across all presets. The Low preset averages 31 FPS, Medium averages 24 FPS (with a minimum of 21 and a maximum of 28), High averages 18 FPS, and Ultra averages just 17 FPS. The gap between Low and Medium is 7 FPS, and the gap between High and Ultra is only 1 FPS, again showing diminishing returns at the top end. At 3840x2160, the results are largely unplayable. Low settings only manage an average of 23 FPS, Medium drops to 18 FPS (with a minimum of 15 and a maximum of 21), High falls to 14 FPS, and Ultra bottoms out at 13 FPS. The data shows a consistent pattern of performance degradation with increasing resolution and settings, highlighting the GPU's inability to handle the workload at higher resolutions.
CPU Role
The AMD Ryzen 5 7400F is a modern 6-core, 12-thread processor based on the Zen 4 architecture. With a base clock of 3.70 GHz and a boost clock of 4.70 GHz, it possesses strong single-threaded performance, which is critical for flight simulators that rely heavily on a single main simulation thread. Its Cinebench R23 scores of 3072 for single-core and 21765 for multi-core are very respectable, placing it in the 83rd percentile of all CPUs. This processing power is more than sufficient to handle the complex flight models, weather systems, and AI traffic that Microsoft Flight Simulator simulates. The CPU's 32 MB of shared L3 cache also helps with data access patterns common in simulation workloads.
In this specific configuration, the CPU is not the limiting factor. The measured FPS data shows that the system is severely GPU-bound. For example, the fact that the system only achieves 39 FPS at 1080p Low suggests the CPU is not being fully utilized, as it could likely push well over 100 FPS in this scenario if the GPU were capable. The CPU's role is to prepare frames for the GPU, but it is spending most of its time idle, waiting for the GTX 1050 Ti to finish rendering. The data implies that the Ryzen 5 7400F has significant headroom for a more powerful GPU. If paired with a graphics card that is 2-3 times faster, the system's performance would scale accordingly, as the CPU would be able to feed it frames without becoming a bottleneck itself.
FAQ
Q: Is the AMD Ryzen 5 7400F a good CPU for Microsoft Flight Simulator?
A: Yes, the data indicates it is more than capable. Its Cinebench R23 single-core score of 3072 is strong, and its 83rd percentile ranking among all CPUs shows it has the processing power needed. The measured FPS is limited by the GPU, not the CPU.
Q: Why is the performance so low even at 1080p with Low settings?
A: The primary reason is the NVIDIA GeForce GTX 1050 Ti. Its 25th percentile ranking and low 3DMark Steel Nomad score of 305 show it is a weak GPU. It cannot render frames fast enough to take advantage of the CPU's power, creating a significant bottleneck.
Q: What is the best resolution to play this game with this combo?
A: According to the data, 1920x1080 is the only viable option. At this resolution, the system can achieve an average of 39 FPS on Low settings, which is the only playable frame rate. Higher resolutions result in average FPS in the teens or low twenties, which is not a smooth experience.
Q: How does this combo rank compared to other tested systems?
A: It ranks 2968 out of 2996 tested combos. This places it in the bottom 1% of all configurations tested for Microsoft Flight Simulator, highlighting how poorly this specific CPU-GPU pairing performs in this game.
Q: Would upgrading the graphics card improve performance?
A: Yes, the data strongly suggests so. The CPU is ranked in the 83rd percentile, while the GPU is in the 25th. The performance bottleneck is clearly the GPU, so upgrading to a faster graphics card would likely result in a massive increase in frame rates, as the Ryzen 5 7400F has the headroom to support it.
Q: Is the 4 GB of VRAM on the GTX 1050 Ti a problem?
A: It is a significant limitation. The game is known for using large textures, and 4 GB is likely insufficient for higher settings. This can lead to texture pop-in and stuttering, although the average FPS data alone cannot fully capture this issue.
Settings Recommendations
Based on the measured FPS data, the only setting that provides a consistently playable experience is the Low preset at 1920x1080, which yields an average of 39 FPS. This is the clear recommendation for this configuration. While 39 FPS is not ideal, it is the only average above 30 FPS in the entire dataset. The Medium preset at 1080p averages 30 FPS, which is borderline playable, but the minimum of 26 FPS suggests it can dip into unplayable territory during demanding scenes. For a flight simulator where smooth control is essential, the extra frames from the Low preset are more valuable than the visual improvements from Medium.
All other resolution and settings combinations result in average frame rates below 31 FPS, with most falling into the teens or low twenties. These are not recommended for a playable experience. For example, the Ultra preset at 1080p averages 22 FPS, and High at 1440p averages 18 FPS, both of which would feel sluggish and unresponsive. The data shows that the GTX 1050 Ti is simply not powerful enough to handle higher graphical fidelity in this game. Therefore, the optimal strategy for this system is to prioritize frame rate over visual quality by using the Low preset at 1080p. This will provide the most stable and responsive experience possible, minimizing the risk of stutters and ensuring the game remains controllable.
Hardware Specifications
AMD Ryzen 5 7400F
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce GTX 1050 Ti in Microsoft Flight Simulator
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 23.0 |
| 3840x2160 | Medium | 18.0 |
| 3840x2160 | High | 14.0 |
| 3840x2160 | Ultra | 13.0 |
| 2560x1440 | Low | 31.0 |
| 2560x1440 | Medium | 24.0 |
| 2560x1440 | High | 18.0 |
| 2560x1440 | Ultra | 17.0 |
| 1920x1080 | Low | 39.0 |
| 1920x1080 | Medium | 30.0 |
| 1920x1080 | High | 23.0 |
| 1920x1080 | Ultra | 22.0 |
Microsoft Flight Simulator with Ryzen 5 7400F + Other GPUs
See how Microsoft Flight Simulator performs with the same CPU but different graphics cards.
Microsoft Flight Simulator with GTX 1050 Ti + Other CPUs
See how Microsoft Flight Simulator performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.