Lockdown Protocol

Lockdown Protocol presents a demanding workload for mobile hardware, and the combination of the Intel Core Ultra 5 135H and the AMD Radeon 8060S produces a distinctive performance profile. This analysis breaks down the measured FPS data to understand how this pairing behaves across resolutions and settings, offering a methodical look at what the numbers indicate about the system's capabilities and limitations in this FPS title.

Resolution Scaling

The performance drop from 1080p to 4K reveals a system heavily influenced by the GPU, particularly at lower settings. At Low settings, the average frame rate degrades from 175 FPS at 1920x1080 to 128 FPS at 2560x1440, a 27% reduction. The subsequent drop from 1440p to 4K (3840x2160) is steeper, with the average falling to 83 FPS, a further 35% decrease. This scaling pattern is typical of a GPU-bound scenario where pixel count becomes the primary limiting factor.

The Medium settings preset tells a similar story, but with a slightly compressed range. The average FPS starts at 124 at 1080p, falls to 91 at 1440p, and then to 59 at 4K. The percentage drop from 1080p to 4K is roughly 52%, demonstrating that as the preset demands more from the rendering pipeline, the overall throughput decreases, but the relative cost of each resolution step remains significant.

High settings show a more pronounced sensitivity to resolution. The average FPS at 1080p is 109, which drops to 80 at 1440p and then to 51 at 4K. The gap between 1440p and 4K is a 36% reduction, indicating that the higher fidelity textures and effects at this preset place a substantial load on the GPU's memory subsystem and compute units when scaling up to 4K.

Ultra settings produce the lowest frame rates and the most dramatic scaling. At 1080p, the average is 81 FPS; at 1440p, it falls to 60 FPS; and at 4K, it drops to 39 FPS. The difference between 1080p and 4K at Ultra is a 52% reduction in average FPS. This suggests that while the CPU is capable of feeding the GPU at lower resolutions, the Ultra preset quickly saturates the GPU's capabilities, making it the clear bottleneck in this configuration.

GPU Role

The AMD Radeon 8060S is an integrated graphics processor based on the RDNA 3.5 architecture, built on a 4 nm process node. It features 2560 shading units, 160 texture mapping units, and 64 render output units. The GPU's role in these results is central, as its performance ceiling is reached at higher settings and resolutions.

A key characteristic of this GPU is its memory configuration, which is "System Shared." This means the GPU relies on the system's main memory rather than dedicated VRAM. The memory clock is listed as "System Shared," and bandwidth is noted as "System Dependent." This architecture can impact performance, particularly in scenarios requiring high memory bandwidth, such as 4K gaming with high-definition textures. The benchmark results suggest that at 4K Ultra, the shared memory system may struggle, as indicated by the 39 FPS average.

The GPU's clock speeds are notable, with a base clock of 1295 MHz and a boost clock of 2900 MHz. This high boost clock helps the integrated GPU deliver competitive results at lower resolutions. The pixel rate is 185.6 GPixel/s and the texture rate is 464.0 GTexel/s, which are respectable figures for an integrated solution. The FP32 performance is rated at 14.85 TFLOPS. These specifications align with the observed performance, where the GPU can handle 1080p High at 109 FPS but begins to show strain as resolution and settings increase.

The GPU's benchmark percentiles reinforce this analysis. It holds an 87th percentile rank among all GPUs, and its average benchmark score of 55757 places it near the AMD Radeon RX 6750 GRE 12 GB, which has a deltaPct of 0.1. This indicates that while it is a powerful integrated GPU, it is not without its limits, especially when considering the memory bandwidth constraints of a shared memory architecture.

How This Combo Ranks

In the database for Lockdown Protocol, this specific combination of Intel Core Ultra 5 135H and AMD Radeon 8060S holds a rank of 1647 out of 2828 tested combos. This places it in the 42nd percentile of all tested system configurations for this game. This rank suggests that while the combo is capable of playable frame rates at many settings, a significant portion of other hardware pairs are able to achieve higher performance.

The ranking is a holistic measure that considers all tested resolutions and settings. Given that the combo achieves over 60 FPS at 1440p Medium and High, its middle-of-the-pack ranking might seem somewhat low. However, the data indicates that the system struggles to maintain high frame rates at 4K, especially on higher presets, which likely drags down its overall standing. Combos that can handle 4K gaming more effectively would naturally rank higher.

This rank of 1647 can be interpreted as a sign of balance. The CPU is not holding back the GPU at lower resolutions, but the GPU's shared memory and integrated nature limit the system's ability to compete with discrete GPU solutions in the most demanding scenarios. The combo is a strong performer for its class, but it is not in the top tier for this game.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the user's priority for visual fidelity versus frame rate smoothness. For a 60 FPS target at 1080p, several presets are viable. High settings deliver an average of 109 FPS, while Medium provides 124 FPS, and even Ultra manages 81 FPS. There is ample headroom at this resolution.

At 1440p, the choice becomes more critical. Medium settings are a strong candidate, delivering an average of 91 FPS with a minimum of 77 FPS. High settings also remain playable, with an average of 80 FPS. For users with a 144Hz display, neither Medium nor High will consistently hit that refresh rate, but both provide a smooth experience. Ultra settings at 1440p produce an average of 60 FPS, which is the minimum threshold for acceptable smoothness in a fast-paced FPS.

The 4K resolution presents a challenge. High settings average 51 FPS, which is below the ideal 60 FPS target. Medium settings fare slightly better with an average of 59 FPS and a minimum of 50 FPS, making it the only preset at this resolution to approach a playable standard. Low settings at 4K average 83 FPS, but the visual compromise is significant.

The data suggests that the "best experience" is a trade-off. For most users, 1440p with Medium or High settings offers the best balance of visual quality and performance. The measured rows show that 1440p Medium (91 FPS) provides a smoother experience than 4K Medium (59 FPS) and is likely the sweet spot for this hardware combination. If 4K is a requirement, Medium settings are the only reasonable choice, as Ultra and High dip below 55 FPS.

FAQ

Q: Can this system run Lockdown Protocol at 4K?

A: Yes, but only at lower settings. The measured data shows an average of 59 FPS at 4K Medium, which is the only preset at that resolution to reach near-60 FPS. High and Ultra settings at 4K produce averages of 51 and 39 FPS, respectively.

Q: What is the best resolution for this combo?

A: 2560x1440 offers the best balance. At Medium settings, the average FPS is 91, and at High, it is 80. Both are well above the 60 FPS threshold, providing a smooth experience while maintaining a higher pixel density than 1080p.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the primary limiting factor at higher resolutions and settings. The frame rate drops significantly from 1080p to 4K, especially on Ultra presets, which is characteristic of a GPU bottleneck. The CPU is sufficient to drive high frame rates at 1080p.

Q: How does this combo compare to similar systems?

A: It ranks 1647th out of 2828 tested combos for this game, placing it in the 42nd percentile. This indicates it is a mid-tier performer, capable of good results at 1080p and 1440p but not competitive with top-tier discrete GPU setups at 4K.

Q: What is the highest settings preset I can use for 60+ FPS?

A: At 1080p, all tested presets, including Ultra, achieve an average of over 60 FPS. At 1440p, you can use High settings for an average of 80 FPS. At 4K, no preset achieves an average of 60 FPS; Medium comes closest at 59 FPS.

Q: Is the frame rate stable, or does it fluctuate?

A: The data includes minimum FPS for Medium settings at each resolution. At 1080p, the minimum is 106 FPS; at 1440p, it is 77 FPS; at 4K, it is 50 FPS. This suggests that frame pacing is generally consistent, with the lowest dips occurring at 4K.

CPU Role

The Intel Core Ultra 5 135H is a 14-core, 18-thread processor based on the Meteor Lake architecture, built on a 7 nm process. It has a base clock of 3.60 GHz and a boost clock of 4.60 GHz. The CPU's role in these benchmark results is to provide enough processing power to avoid becoming a bottleneck for the GPU.

The benchmark scores for the CPU indicate it is a capable performer. It holds an 81st percentile rank among all CPUs, with an average benchmark score of 29093. Its nearest rival is the AMD Ryzen 7 5800X, with a deltaPct of -0.1, indicating virtually identical average scores. This level of performance is more than sufficient to handle game logic and physics in Lockdown Protocol.

The data from the measured FPS suggests that the CPU is not the limiting factor in this game. At 1080p Low, the system achieves 175 FPS, which is a high frame rate that demands strong single-threaded performance. The CPU's single-thread benchmark score is 3521 in PassMark, and its Cinebench R23 single-core score is 1700. These scores indicate that the CPU can handle high-refresh-rate gaming.

The CPU's cache hierarchy includes 112 KB of L1 cache per core, 2 MB of L2 cache per core, and 18 MB of shared L3 cache. This configuration helps with data access speeds. The TDP is 28 W, which is typical for a mobile processor. The fact that frame rates scale so heavily with resolution and settings points to the GPU being the performance ceiling, while the CPU consistently provides a solid foundation for the frame generation process.

Measured FPS Breakdown

The following table summarizes the measured average FPS for each resolution and settings preset. The data shows a clear trend of decreasing performance as both resolution and settings complexity increase.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|---|---|---|---|---|

| 3840x2160 | High | 51 | N/A | N/A |

| 3840x2160 | Low | 83 | N/A | N/A |

| 3840x2160 | Medium | 59 | 50 | 68 |

| 3840x2160 | Ultra | 39 | N/A | N/A |

| 2560x1440 | High | 80 | N/A | N/A |

| 2560x1440 | Low | 128 | N/A | N/A |

| 2560x1440 | Medium | 91 | 77 | 105 |

| 2560x1440 | Ultra | 60 | N/A | N/A |

| 1920x1080 | High | 109 | N/A | N/A |

| 1920x1080 | Low | 175 | N/A | N/A |

| 1920x1080 | Medium | 124 | 106 | 143 |

| 1920x1080 | Ultra | 81 | N/A | N/A |

At 1920x1080, the system demonstrates its peak performance. Low settings yield an average of 175 FPS, while High and Ultra produce 109 and 81 FPS, respectively. The Medium preset shows a solid average of 124 FPS with a minimum of 106 FPS, ensuring a consistent experience.

Moving to 2560x1440, the impact of resolution becomes clear. Low settings drop to 128 FPS, High to 80 FPS, and Ultra to exactly 60 FPS. The Medium preset provides an average of 91 FPS, with a minimum of 77 FPS and a maximum of 105 FPS, indicating good stability.

At 3840x2160, the system is pushed to its limits. Low settings are the only preset to exceed 60 FPS, with an average of 83 FPS. Medium settings manage an average of 59 FPS, with a minimum of 50 FPS. High settings fall to 51 FPS, and Ultra settings drop to 39 FPS. This breakdown confirms that 4K gaming is only viable at the lowest settings for a consistently smooth frame rate, with Medium being a borderline option.