Lockdown Protocol

The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 3080 delivers a compelling 1080p and 1440p experience in Lockdown Protocol, though 4K Ultra demands compromise. This analysis examines the measured frame rates to understand the balance between CPU and GPU load, the role of the RTX 3080's specifications, and how this specific combination stacks up against the broader database.

Resolution Scaling

Lockdown Protocol shows a classic resolution scaling curve with this hardware. At 1080p Low, the combo produces 249 FPS, but this drops sharply to 183 FPS at 1440p Low, and further to 118 FPS at 4K Low. This represents a 26.5% reduction from 1080p to 1440p, and a 52.6% reduction from 1080p to 4K, indicating the GPU becomes the primary bottleneck as pixel count increases.

The scaling pattern across presets is consistent. At High settings, the average frame rate falls from 155 FPS at 1080p, to 113 FPS at 1440p, and finally to 73 FPS at 4K. The gap between 1080p and 1440p High is 42 FPS, while the gap between 1440p and 4K High is 40 FPS. This near-linear decline suggests the RTX 3080 is being pushed progressively harder, with the CPU's 8 cores and 16 threads able to keep up even at lower resolutions.

Examining the Medium preset data, which includes minimum and maximum frame rates, provides additional insight. At 1080p Medium, the average is 177 FPS with a minimum of 151 FPS and a maximum of 204 FPS. At 1440p Medium, the average drops to 130 FPS with a range of 110 to 149 FPS. At 4K Medium, the average falls to 84 FPS with a spread of 71 to 96 FPS. The narrowing of the frame time variance at higher resolutions, as seen in the smaller delta between min and max at 4K, suggests the workload becomes more consistent when the GPU is the limiting factor.

The Ultra preset shows the steepest scaling. At 1080p Ultra, the combo manages 116 FPS, which drops to 85 FPS at 1440p Ultra, and finally to 55 FPS at 4K Ultra. The 4K Ultra result is the only measured configuration below 60 FPS, indicating that this settings level at this resolution exceeds what the RTX 3080 can comfortably sustain. The data suggests that Lockdown Protocol at 4K is GPU-bound across all presets, while at 1080p, the relatively small frame rate differences between some settings levels point to a more balanced CPU/GPU utilization.

GPU Role

The NVIDIA GeForce RTX 3080 is the dominant component in this pairing, and its specifications directly explain the resolution scaling behavior. The GPU features 10 GB of GDDR6X memory on a 320-bit bus, providing a bandwidth of 760.3 GB/s. This memory configuration is sufficient for the textures and data loads typical of an FPS title like Lockdown Protocol, even at 4K resolution with High settings, where the 73 FPS average indicates no obvious memory capacity bottleneck.

The GPU's clock behavior supports its performance tier. The base clock runs at 1440 MHz with a boost clock of 1710 MHz. The 8 nm Ampere architecture, built on Samsung's process, contains 28,300 million transistors on a 628 mm² die. The shading units number 8704, with 272 texture mapping units and 96 raster output units. These specifications produce a pixel rate of 164.2 GPixel/s and a texture rate of 465.1 GTexel/s, which are directly relevant to how quickly the card can fill frames at higher resolutions.

A key observation from the measured FPS data is the GPU's behavior at 1080p Low, where it achieves 249 FPS. This is the highest recorded frame rate in the dataset, and the fact that the RTX 3080 can reach this level indicates the GPU is not fully utilized at lower resolutions and settings. The data suggests the CPU becomes a more significant factor at 1080p Low, with the GPU waiting on the Ryzen 7 5800XT to deliver draw calls and game logic updates.

The RTX 3080's FP32 performance is listed at 29.77 TFLOPS, with FP16 also at 29.77 TFLOPS (1:1). While these raw compute figures help contextualize the card's theoretical capability, the measured results in Lockdown Protocol show a more practical picture. The card's 68 RT cores and 272 tensor cores are present for ray tracing and DLSS workloads, but the measured FPS data here does not include any ray tracing or upscaling scenarios. The GPU's percentile ranking against all GPUs is 68, and its average benchmark score is 23172, placing it in the upper-middle tier of the tested database.

How This Combo Ranks

In the database of tested combinations for Lockdown Protocol, this specific pairing of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3080 ranks 1031 out of 3714 total combinations. This places it in the 72nd percentile of all tested combos, meaning roughly 72% of configurations perform worse in this game and 28% perform better. This is a strong result, though not elite, indicating that while the hardware is capable, there are faster combinations in the database.

The rank of 1031 out of 3714 becomes more meaningful when broken down by resolution. At 1080p, the combo's frame rates are high enough to suggest it is competitive with many other mid-to-high-end pairings. The 249 FPS at 1080p Low is particularly strong, putting this combo ahead of configurations that might be CPU-limited at that resolution. However, the 4K Ultra result of 55 FPS is below the 60 FPS threshold many users consider the minimum for smooth gameplay, which likely drags the overall rank down.

Contextualizing the rank against the component individual performance is useful. The CPU's percentile versus all CPUs is 81, which is notably higher than the GPU's percentile of 68. This suggests the Ryzen 7 5800XT is a comparatively stronger component in this pairing relative to its peers. The GPU's average benchmark score of 23172 is close to its nearest rivals, including the NVIDIA P106-100 (23249, deltaPct -0.3) and AMD Radeon RX 6600M (23273, deltaPct -0.4), indicating the RTX 3080 is performing near the expected level for its class.

Measured FPS Breakdown

The dataset provides average frame rates for 12 distinct configurations, spanning three resolutions and four settings levels. Each resolution shows a consistent ordering of settings from highest FPS to lowest: Low, High, Medium, and Ultra. This ordering holds across all resolutions, confirming that the settings presets scale as intended.

At 1080p, the Low preset achieves 249 FPS, Medium achieves 177 FPS (with min 151 and max 204), High achieves 155 FPS, and Ultra achieves 116 FPS. The difference between Low and Ultra at 1080p is 133 FPS, representing a 53.4% drop. The Medium preset's frame time variance is notable, with a 53 FPS gap between minimum and maximum, suggesting some scenes are significantly more demanding than others at this resolution.

At 1440p, the measured averages are 183 FPS for Low, 130 FPS for Medium (min 110, max 149), 113 FPS for High, and 85 FPS for Ultra. The drop from Low to Ultra is 98 FPS, a 53.6% reduction, which is nearly identical to the percentage drop seen at 1080p. This consistency indicates that the settings presets have a similar relative impact on performance regardless of resolution.

At 4K, the averages are 118 FPS for Low, 84 FPS for Medium (min 71, max 96), 73 FPS for High, and 55 FPS for Ultra. The Low to Ultra drop is 63 FPS, a 53.4% reduction, again matching the pattern seen at lower resolutions. The 4K Medium result shows a 25 FPS gap between minimum and maximum, which is the smallest absolute variance in the dataset, indicating that at this resolution, the GPU is more consistently saturated.

Examining the progression across resolutions for each settings level reveals the scaling factors. For Low settings, 1080p to 1440p is a 26.5% drop, and 1440p to 4K is a 35.5% drop. For High settings, the drops are 27.1% and 35.4% respectively. This consistent pattern across settings levels suggests that resolution scaling is independent of the preset chosen, with the GPU's pixel throughput being the primary limiter.

Settings Recommendations

The measured FPS data allows for clear settings recommendations based on the target frame rate and resolution. The most critical finding is that 4K Ultra is the only configuration that fails to reach 60 FPS, averaging just 55 FPS. For 4K users, the High preset at 73 FPS is the highest quality option that maintains a comfortable margin above 60 FPS, while Medium at 84 FPS offers additional headroom with a modest visual compromise.

For 1440p, all four presets exceed 60 FPS, with Ultra achieving 85 FPS. This makes 1440p Ultra the recommended configuration for users prioritizing visual quality, as it still provides a smooth experience. Those with 1440p high refresh rate monitors may prefer High at 113 FPS or Medium at 130 FPS to better utilize displays in the 120-144 Hz range. The Low preset at 1440p produces 183 FPS, which is sufficient for 165 Hz displays, though the visual trade-off is substantial.

At 1080p, the situation is ideal for high refresh rate gaming. The Ultra preset achieves 116 FPS, which is excellent for most 120 Hz displays. The High preset at 155 FPS easily drives 144 Hz monitors, while Medium at 177 FPS and Low at 249 FPS are suited for 165 Hz and 240 Hz displays respectively. For competitive play where frame rate is paramount, the Low preset's 249 FPS is the clear choice, but for most players, High at 155 FPS offers the best balance of visual fidelity and performance.

The data indicates that the Medium preset across all resolutions provides the most consistent frame time behavior, as it is the only preset with recorded minimum and maximum values. At 1080p Medium, the 151 FPS minimum still clears 60 FPS by a wide margin, and even at 4K Medium, the 71 FPS minimum remains above 60 FPS. This consistency makes Medium a safe recommendation for users who are sensitive to frame time spikes.

CPU Role

The AMD Ryzen 7 5800XT brings 8 cores and 16 threads to this pairing, based on the Zen 3 architecture codenamed Vermeer. The CPU operates at a base clock of 3.80 GHz with a boost clock of 4.80 GHz, and its 32 MB of shared L3 cache provides ample capacity for game code and data. The CPU's benchmark results show strong multi-threaded performance, with a Cinebench R23 multicore score of 23794 and a single-core score of 3359, positioning it in the 81st percentile of all CPUs.

In Lockdown Protocol, the CPU's role is most apparent at 1080p Low, where the GPU is less stressed and the frame rate reaches 249 FPS. At this point, the CPU's ability to feed the GPU becomes the limiting factor. The CPU's PassMark single-thread score of 3535 and 3DMark single-thread score of 959 indicate solid per-core performance, which is essential for an FPS game that relies heavily on a single main thread for game logic.

The CPU's memory bandwidth of 51.2 GB/s over a dual-channel DDR4 interface is sufficient for this workload, and its PCIe Gen 4 support with 20 lanes ensures the RTX 3080 can communicate at full speed. The 3DMark 16-thread score of 7683 and 8-thread score of 6141 show that the CPU scales well with thread count, though the 4-thread score of 3603 suggests diminishing returns beyond 8 threads for this title.

The nearest CPU rivals in the database include the AMD Ryzen 7 7840H (avgScore 29868, deltaPct 0) and AMD Ryzen 7 8845HS (avgScore 29955, deltaPct -0.3), indicating the 5800XT is essentially on par with these newer mobile parts. The Ryzen 5 9600X (avgScore 29713, deltaPct 0.6) is slightly behind. This parity suggests that the 5800XT's core architecture remains competitive, and the 105W TDP allows for sustained boost clocks in desktop systems.

At higher resolutions, the CPU's influence diminishes. The consistent percentage drops across settings levels at each resolution indicate that the GPU is the bottleneck at 4K and even at 1440p Ultra. The CPU's headroom at 1080p Low is evidenced by the 249 FPS result, which is likely near the game engine's physics and logic limit rather than a hard hardware cap. Overall, the Ryzen 7 5800XT provides more than enough computational power to avoid being the primary bottleneck in this combination, except in the most GPU-light scenarios.

FAQ

Q: What is the highest average frame rate achieved by this combo in Lockdown Protocol?

A: The highest average frame rate is 249 FPS, achieved at 1920x1080 resolution with the Low settings preset.

Q: Is 4K Ultra playable with this hardware?

A: No. At 3840x2160 with Ultra settings, the combo averages 55 FPS, which is below the 60 FPS threshold commonly considered the minimum for smooth gameplay. The 4K High preset at 73 FPS is the recommended 4K option.

Q: How does this combo rank compared to other tested combinations in this game?

A: The combination of AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 3080 ranks 1031 out of 3714 tested combos, placing it in the 72nd percentile of all configurations.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset averages 183 FPS while the Ultra preset averages 85 FPS, a difference of 98 FPS or approximately 53.6% lower performance for Ultra settings.

Q: Does the CPU or GPU limit performance at 1080p Low?

A: The data suggests the CPU becomes a more significant factor at 1080p Low, where the 249 FPS result likely approaches the limit of what the Ryzen 7 5800XT can feed to the GPU. At higher resolutions, the GPU is clearly the bottleneck.

Q: What is the frame time consistency like at 1080p Medium?

A: At 1080p Medium, the average FPS is 177 with a minimum of 151 and a maximum of 204, showing a range of 53 FPS between the lowest and highest recorded frames. This indicates some scene-to-scene variance but remains well above 60 FPS at all times.