Lockdown Protocol

Resolution Scaling

Lockdown Protocol's frame rate behavior across resolutions reveals a system that transitions from CPU-bound at 1080p to firmly GPU-bound at 4K. The AMD Ryzen 7 5800X3D and NVIDIA GeForce RTX 5060 combo demonstrates this shift clearly through the measured low-settings data, which provides the cleanest view of scaling without graphics preset confounds.

At 1080p Low, the combo produces 201 FPS average. Moving to 1440p Low drops that to 148 FPS, a reduction of approximately 26%. The scaling continues to 4K Low, where the average falls to 95 FPS, another 36% reduction from the 1440p figure. These percentages matter: the 1080p-to-1440p drop is smaller than the 1440p-to-4K drop, which suggests the CPU still has headroom at 1440p but the GPU becomes progressively more dominant as pixel count rises.

The Ultra preset tells an even more dramatic story. At 1080p Ultra, the combo manages 94 FPS average. At 1440p Ultra, that number falls to 69 FPS, a 27% decline. At 4K Ultra, the average collapses to 44 FPS, a 36% drop from the 1440p result. The consistency of these percentage declines across Low and Ultra presets indicates that resolution scaling in Lockdown Protocol follows a predictable pattern regardless of graphical load.

The 1080p Low result of 201 FPS is particularly telling. That figure approaches the practical ceiling for many high-refresh displays, and the fact that the 5800X3D can feed the RTX 5060 enough frames to exceed 200 FPS at this resolution suggests the CPU is doing its job efficiently. Conversely, the 4K Ultra result of 44 FPS shows a system that has clearly run out of GPU headroom. The measured minimum of 57 FPS at 4K Medium, with an average of 68 FPS, reinforces that 4K gaming at higher presets will produce stutter-prone experiences on this hardware.

The data indicates that the limiting component shifts decisively between 1080p and 4K. At 1080p, the CPU's 8 cores and 16 threads with 96 MB of shared L3 cache are sufficient to push frame rates well beyond what most displays can show. At 4K, the RTX 5060's 8 GB of GDDR7 memory and 128-bit bus become the primary constraint. The resolution scaling curve here is steep, and users targeting 4K should expect to compromise heavily on settings.

GPU Role

The NVIDIA GeForce RTX 5060 brings a 5 nm Blackwell 2.0 architecture with 3840 shading units and 30 RT cores. Its 8 GB of GDDR7 memory operates across a 128-bit bus, delivering 448.0 GB/s of bandwidth. The base clock sits at 2280 MHz with a boost of 2497 MHz, and memory runs at 1750 MHz with 28 Gbps effective speed. The GPU's pixel rate is 119.9 GPixel/s, with a texture rate of 299.6 GTexel/s.

In Lockdown Protocol, the GPU's memory configuration appears to be a meaningful factor at higher resolutions. The 8 GB capacity is sufficient for 1080p and 1440p across all presets, as evidenced by the playable frame rates at those resolutions. However, at 4K Ultra, the 44 FPS average suggests the memory bandwidth and capacity are being taxed heavily. The 448.0 GB/s bandwidth is a notable figure for a card in this class, but Lockdown Protocol's 4K Ultra demands appear to exceed what this configuration can comfortably deliver.

The GPU's benchmark profile shows a passmark G3D score of 20891 and a passmark GPU compute score of 10899. Its percentile ranking versus all GPUs is 72, placing it above the median but not in the upper echelon. The nearest rivals in the GPU benchmark data are the AMD Radeon 860M with a deltaPct of -0.3, the NVIDIA GeForce MX550 at -0.3, the AMD Radeon RX 5700 XT 50th Anniversary at -0.8, and the AMD Radeon RX 6750 XT at 1.2. These tight deltas indicate the RTX 5060 sits in a competitive mid-range segment.

The measured FPS data shows the GPU scaling predictably with settings. At 1080p, the spread from Low to Ultra is 201 FPS down to 94 FPS, a range of 107 FPS. At 1440p, the spread narrows to 148 FPS down to 69 FPS, a range of 79 FPS. At 4K, the spread is 95 FPS down to 44 FPS, a range of 51 FPS. This narrowing range as resolution increases is classic GPU-bound behavior, where the graphics processor becomes the sole arbiter of performance.

The RTX 5060's 145 W TDP and PCIe 5.0 x8 interface are worth noting in the context of Lockdown Protocol's demands. The card's dual-slot design and single 8-pin power connector suggest it is not a power-hungry part, yet it delivers consistent frame rates across most tested configurations. The 3DMark Steel Nomad DX12 score of 3628 provides a synthetic reference point that aligns with the card's real-world Lockdown Protocol performance. The Geekbench OpenCL score of 112787 and Vulkan score of 113321 show balanced compute capability across APIs.

How This Combo Ranks

The Ryzen 7 5800X3D paired with the RTX 5060 achieves a combo rank of 1649 out of 3714 tested combinations in Lockdown Protocol. That places this pairing in the 55th percentile of all tested combos, meaning roughly 45% of configurations perform better while 55% perform worse. This is a solid mid-pack result for a system that pairs a 2022-era CPU with a 2025-era GPU.

The CPU's individual ranking provides context. The 5800X3D holds a percentile of 80 versus all CPUs, with an average benchmark score of 27896. Its nearest rivals in the CPU benchmark data are the AMD Ryzen 7 6800U with a deltaPct of 0, the Intel Core i9-10900K at 0.1, the AMD Ryzen AI 5 PRO 340 at -0.1, and the Intel Core i5-12600KF at 0.3. These are remarkably tight margins, with the 5800X3D essentially trading blows with a mobile chip, a previous-generation flagship, and a newer mid-range part.

The GPU's ranking is lower but still respectable. The RTX 5060 holds a percentile of 72 versus all GPUs, with an average benchmark score of 26331. Its nearest rivals show similarly tight deltas: the AMD Radeon 860M at -0.3, the NVIDIA GeForce MX550 at -0.3, the AMD Radeon RX 5700 XT 50th Anniversary at -0.8, and the AMD Radeon RX 6750 XT at 1.2. The narrow deltas suggest that in synthetic benchmarks, the RTX 5060 is extremely close to several competing parts, but in Lockdown Protocol specifically, the combo rank of 1649 reflects how the CPU and GPU interact in this particular game.

The discrepancy between the CPU's strong 80th percentile and the GPU's 72nd percentile, combined with the combo's 55th percentile, suggests that Lockdown Protocol is sensitive to both components but perhaps more so to the GPU. The 5800X3D's 96 MB of L3 cache is a differentiator in many games, but the measured FPS data shows the GPU becoming the bottleneck at higher resolutions. The combo rank of 1649 out of 3714 indicates that while this pairing is competent, there are many configurations that deliver better Lockdown Protocol performance.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets, providing a comprehensive view of this combo's capabilities in Lockdown Protocol.

At 1080p, the Low preset delivers 201 FPS average. The Medium preset drops to 143 FPS average, with a measured minimum of 121 FPS and maximum of 164 FPS. High settings produce 125 FPS average. The Ultra preset yields 94 FPS average. The progression from Low to Ultra shows a 53% reduction in frame rate, from 201 FPS to 94 FPS. The Medium preset's minimum of 121 FPS indicates that even at mid-range settings, frame times remain consistent enough to avoid major stutters.

At 1440p, performance scales down but remains playable across all presets. Low settings produce 148 FPS average. Medium delivers 105 FPS average, with a minimum of 89 FPS and maximum of 120 FPS. High settings yield 91 FPS average. Ultra drops to 69 FPS average. The spread from Low to Ultra is 79 FPS, and the Medium preset's minimum of 89 FPS suggests that 60 Hz displays will be easily satisfied at 1440p Medium and above.

At 4K, the picture changes substantially. Low settings produce 95 FPS average, which is still respectable. Medium delivers 68 FPS average, with a minimum of 57 FPS and maximum of 78 FPS. High settings drop to 59 FPS average. Ultra falls to 44 FPS average. The Medium preset's minimum of 57 FPS is concerning for users with 60 Hz displays, as it leaves little headroom for frame time spikes. The Ultra result of 44 FPS is below the threshold for smooth gameplay on most displays.

Comparing the Medium preset across resolutions provides the most complete picture, as it has full min/max data. At 1080p Medium, the average is 143 FPS with a range of 121 to 164. At 1440p Medium, the average drops to 105 FPS with a range of 89 to 120. At 4K Medium, the average falls to 68 FPS with a range of 57 to 78. The percentage drops from 1080p to 1440p is 27%, and from 1440p to 4K is 35%. The minimum FPS values show a similar pattern: 121 at 1080p, 89 at 1440p, and 57 at 4K. These numbers indicate that the Medium preset is the most balanced option across all resolutions.

Settings Recommendations

The measured FPS data points to the Medium preset as the best overall experience for this combo in Lockdown Protocol. At 1080p Medium, the 143 FPS average with a 121 FPS minimum provides ample headroom for high-refresh displays. At 1440p Medium, the 105 FPS average with an 89 FPS minimum still clears the 60 FPS threshold comfortably, making this the recommended setting for users with 1440p monitors. At 4K Medium, the 68 FPS average with a 57 FPS minimum is borderline; users with standard 60 Hz displays will find it acceptable, but those sensitive to frame drops may want to consider Low settings.

The High preset is a middle-ground option that delivers 125 FPS at 1080p, 91 FPS at 1440p, and 59 FPS at 4K. The 4K High result of 59 FPS is just below the 60 FPS target, making it a marginal choice for that resolution. The Low preset offers the highest frame rates at every resolution, with 201 FPS at 1080p, 148 FPS at 1440p, and 95 FPS at 4K, but sacrifices visual fidelity.

The Ultra preset is difficult to recommend for this combo. At 1080p Ultra, the 94 FPS average is playable but represents a significant drop from High's 125 FPS for what may be marginal visual gains. At 1440p Ultra, the 69 FPS average is playable but leaves no headroom for demanding scenes. At 4K Ultra, the 44 FPS average is below the threshold for smooth gameplay, and this setting should be avoided at 4K.

For users prioritizing frame rate, the Low preset at 1440p delivers 148 FPS, which exceeds what most 144 Hz displays can show. For users prioritizing visual quality while maintaining smooth gameplay, the Medium preset at 1440p with its 105 FPS average and 89 FPS minimum is the sweet spot. At 1080p, the High preset's 125 FPS average provides an excellent balance of quality and performance. The data suggests that Medium is the most versatile preset across all resolutions, as it is the only one that maintains a minimum FPS above 57 across all tested resolutions.

CPU Role

The AMD Ryzen 7 5800X3D is a Zen 3 architecture processor built on TSMC's 7 nm process, featuring 8 cores and 16 threads. Its base clock is 3.40 GHz with a boost clock of 4.50 GHz, and it draws 105 W TDP. The CPU's defining feature is its 96 MB of shared L3 cache, which is substantial for a desktop processor of this generation. The 5800X3D supports DDR4 memory in a dual-channel configuration with 51.2 GB/s bandwidth, and it uses the AMD Socket AM4 platform with PCIe Gen 4 connectivity.

In Lockdown Protocol, the CPU's performance is evidenced by the 1080p Low result of 201 FPS. This high frame rate at the lowest graphical settings indicates that the CPU is capable of feeding the GPU with sufficient draw calls and game logic updates. The 5800X3D's 3D V-Cache technology, which provides the 96 MB L3 cache, is designed to improve gaming performance by reducing memory latency, and the measured results suggest this translates to strong frame rates in CPU-bound scenarios.

The CPU's benchmark scores provide context for its gaming performance. The Cinebench R23 multicore score of 14317 and single-core score of 1452 show balanced performance. The Geekbench multicore score of 11765 and single-core score of 2017 reinforce this picture. The 3DMark threaded tests show scaling from 1746 at 2 threads to 7299 at 16 threads, with the max threads score of 7285 closely matching the 16-thread result. This indicates the CPU scales well with additional threads, which is beneficial for games that utilize multiple cores.

The 5800X3D's percentile of 80 versus all CPUs places it in the top quintile of processors. Its nearest rivals in the benchmark data are all within a 0.3 deltaPct, showing that it performs comparably to the AMD Ryzen 7 6800U, Intel Core i9-10900K, AMD Ryzen AI 5 PRO 340, and Intel Core i5-12600KF. The 6800U being a mobile part with a 0 deltaPct is notable, as it suggests the 5800X3D's desktop-oriented design does not provide a significant advantage in synthetic benchmarks, though its gaming-specific cache configuration may help in real-world scenarios like Lockdown Protocol.

The CPU's role in the measured FPS data becomes less prominent as resolution increases. At 1080p, the CPU's ability to maintain 201 FPS at Low settings shows it is not the limiting factor. At 4K, the GPU's constraints dominate, and the CPU's performance becomes secondary. The fact that the combo ranks 1649 out of 3714 in Lockdown Protocol, despite the CPU's strong 80th percentile, suggests that the game's performance is more heavily influenced by the GPU component in this pairing. The 5800X3D provides a solid foundation for the RTX 5060, but the GPU's 8 GB memory and 128-bit bus ultimately cap the system's performance at higher resolutions and settings.