Lockdown Protocol

How This Combo Ranks

The pairing of the AMD Ryzen 7 5800X with the NVIDIA GeForce GTX 1050 Ti lands at rank 1609 out of 1637 tested combinations for Lockdown Protocol. That places this system in the bottom 2% of all tested configs, a position that reflects a severe imbalance between the two components. The CPU is an 84th-percentile processor, while the GPU sits at the 30th percentile against all GPUs. This is a matchup where the graphics card is the clear bottleneck, and the benchmark data confirms that the processor's potential is largely untapped.

The ranking becomes more telling when examining the GPU's nearest rivals. The GTX 1050 Ti scores nearly identically to the NVIDIA GeForce 930A (0% delta), the NVIDIA GeForce 940M (0.4% ahead), and the AMD Radeon R7 240 (0.7% ahead). These are all mobile or entry-level desktop parts. In a fast-paced FPS like Lockdown Protocol, this level of graphics performance places the combo in the same performance tier as much older hardware, regardless of the strong CPU sitting behind it. The data implies that users of this combo are effectively GPU-limited before the Ryzen 7 5800X can demonstrate any meaningful advantage.

GPU Role

The GTX 1050 Ti's specifications explain why this combo ranks so low. With 4 GB of GDDR5 memory on a 128-bit bus, the card delivers 112.1 GB/s of bandwidth. Its base clock runs at 1291 MHz with a boost of 1392 MHz. The 768 shading units and 32 ROPs are modest figures for a modern FPS title. The card's FP32 performance is 2.138 TFLOPS, which is extremely low by contemporary standards.

The benchmark results for the GPU reveal its limitations. In 3DMark Steel Nomad (DX12), the card scores 305. Its PassMark G3D score is 6340, while the compute score is 2652. These numbers indicate that the GPU struggles with both rasterization and compute workloads. For Lockdown Protocol, this translates into an inability to maintain high frame rates at demanding settings. The data shows that even at 1080p, the card only reaches 64 FPS on Low settings, and this drops dramatically as settings increase. The 4 GB VRAM capacity is another constraint, though the measured FPS data does not explicitly show VRAM-related stutters, the card's overall bandwidth and compute limits are the dominant factors in the results.

Interestingly, the GPU's closest rivals in benchmark scores are the NVIDIA GeForce 930A (0% delta) and the NVIDIA GeForce 940M (0.4% delta), both of which are mobile-oriented parts. This suggests that the GTX 1050 Ti is performing at a level roughly equivalent to older laptop GPUs, which is a sobering context for a desktop configuration aiming to run a 2024 FPS title.

FAQ

Q: What is the best average FPS this combo achieves in Lockdown Protocol?

A: The highest measured average FPS is 64, achieved at 1920x1080 resolution with Low settings.

Q: How does this combo rank compared to all tested configurations?

A: The combo ranks 1609 out of 1637 total tested combinations, placing it in the bottom 2% of tested systems.

Q: What is the performance gap between the CPU and GPU in this setup?

A: The Ryzen 7 5800X scores at the 84th percentile among all CPUs, while the GTX 1050 Ti scores at the 30th percentile among all GPUs, indicating a significant bottleneck at the graphics card.

Q: Can this combo run Lockdown Protocol at 4K resolution?

A: Yes, but only marginally. At 3840x2160 with Low settings, it averages 30.3 FPS. At Ultra settings, it drops to 14.3 FPS.

Q: What is the FPS difference between 1080p Low and 1080p Ultra?

A: The combo delivers 64 FPS at 1080p Low, dropping to 30.7 FPS at 1080p Ultra, a reduction of 33.3 FPS.

Q: How does the GPU compare to its nearest rivals in benchmark scores?

A: The GTX 1050 Ti scores 5316 on average, nearly identical to the NVIDIA GeForce 930A (5317, 0% delta) and the NVIDIA GeForce 940M (5297, 0.4% delta).

Measured FPS Breakdown

The measured FPS data provides a clear picture of the combo's capabilities across resolutions and settings. At 1920x1080, the system delivers 64 FPS on Low, 42.2 FPS on Medium, 39.6 FPS on High, and 30.7 FPS on Ultra. This represents a spread of 33.3 FPS between the lowest and highest settings, showing that the GPU's performance scales significantly with graphical demands.

Moving to 2560x1440, the FPS figures drop noticeably. Low settings yield 45 FPS, Medium produces 31.7 FPS, High averages 29.9 FPS, and Ultra falls to 19.4 FPS. The gap between Low and Ultra at this resolution is 25.6 FPS. At 3840x2160, the results become marginal for playable frame rates. Low settings average 30.3 FPS, Medium drops to 21.8 FPS, High manages 18.1 FPS, and Ultra bottoms out at 14.3 FPS.

The data shows a consistent pattern: each increase in resolution or settings tier exacts a substantial toll on performance. The largest single drop occurs between 1080p Low (64 FPS) and 1440p Low (45 FPS), a 19 FPS reduction. The smallest difference between adjacent settings is at 1440p between Medium (31.7 FPS) and High (29.9 FPS), a gap of only 1.8 FPS. This suggests that the GPU is so constrained that High settings offer little visual benefit over Medium at higher resolutions.

Resolution Scaling

The scaling from 1080p to 4K reveals the GPU's fundamental limitations. At Low settings, the FPS drops from 64 at 1080p to 45 at 1440p, then to 30.3 at 4K. That is a 52.7% reduction from 1080p to 4K. At Ultra settings, the drop is from 30.7 at 1080p to 19.4 at 1440p, then to 14.3 at 4K, a 53.4% reduction. These percentages are remarkably consistent, indicating that the GPU is handling the increased pixel count in a predictable, linear fashion.

This scaling behavior points to a GPU-bound scenario. The Ryzen 7 5800X, with its 8 cores and 16 threads boosting up to 4.70 GHz, has ample headroom to feed the GTX 1050 Ti. The fact that FPS scales so directly with resolution suggests that the graphics card's rendering throughput is the limiting factor, not the CPU's ability to prepare frames. The CPU's single-thread score of 943 in 3DMark and 3327 in Cinebench R23 are far above what this GPU can utilize in most gaming scenarios.

The data implies that lowering resolution does not proportionally improve FPS because the GPU is already working near its maximum capacity. Even at 1080p Low, the card only reaches 64 FPS, which is below the refresh rate of most modern gaming monitors. This reinforces the conclusion that the GPU is the definitive bottleneck in this combination.

CPU Role

The AMD Ryzen 7 5800X is a Zen 3 architecture processor built on TSMC's 7 nm process. It features 8 cores and 16 threads, with a base clock of 3.80 GHz and a boost clock of 4.70 GHz. The CPU has 32 MB of L3 cache and a 40 MB combined L2/L3 configuration. Its memory bandwidth is rated at 51.2 GB/s with dual-channel DDR4 support. The processor's benchmark scores are substantial: a Cinebench R23 multicore score of 23571 and a single-core score of 3327. Its PassMark multithread score is 27732, and the average benchmark score is 27606.

In the context of Lockdown Protocol, this CPU is vastly overqualified for the GTX 1050 Ti. The nearest CPU rivals are the AMD Ryzen 7 5800 (0.3% delta) and the Intel Core i5-12600KF (-0.8% delta), both of which are similarly powerful. The CPU's 84th percentile ranking among all processors means it can handle any game's CPU demands easily. Yet in this combo, the GPU's 30th percentile ranking holds the system back.

The data suggests that the CPU is not the limiting factor in any measured scenario. The FPS figures are consistent with GPU-bound behavior across all resolutions. If the CPU were the bottleneck, we would expect to see similar FPS numbers at 1080p and 1440p, since the CPU would be the fixed constraint. Instead, FPS drops systematically with resolution, confirming the GPU's role as the primary limiter. The Ryzen 7 5800X is effectively idle in this configuration, waiting for the GTX 1050 Ti to catch up.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo is at 1920x1080 with Low settings, delivering 64 FPS. This is the only configuration that exceeds 60 FPS, which is generally considered the minimum for smooth gameplay in a fast-paced FPS. At 1080p Medium, the FPS drops to 42.2, which is playable but noticeably less fluid. The jump from Low to Medium costs 21.8 FPS, a significant penalty for what is likely a modest visual improvement on this GPU.

For users who prioritize visual quality over frame rate, 1080p High at 39.6 FPS is a viable option, though it remains below 40 FPS. At 1080p Ultra, the FPS falls to 30.7, which is borderline playable for slower-paced games but risky for a competitive FPS. Moving to 1440p or 4K is not recommended, as even Low settings at 1440p only produce 45 FPS, and 4K Low drops to 30.3 FPS.

The data supports a clear recommendation: stick to 1080p Low or Medium for the best balance of performance and visuals. The 1440p and 4K results are too low for competitive play, with most settings falling below 32 FPS. This combo is best suited for 1080p gaming with reduced settings, and the GPU's limitations make higher resolutions impractical. The Ryzen 7 5800X's power is wasted at these settings, but users looking to upgrade later will find that the CPU has substantial headroom for a future GPU upgrade.