Lockdown Protocol

The AMD Ryzen 7 5700X3D paired with the NVIDIA GeForce RTX 3080 Ti delivers a robust 1080p experience in Lockdown Protocol, with the data showing a clear transition from CPU-bound to GPU-bound behavior as resolution increases. This combination ranks 463rd out of 1,637 tested combos, placing it in the upper tier of systems for this title. The measured frame rates across four presets and three resolutions reveal a system that excels at high-refresh 1440p gaming while remaining capable at 4K.

Resolution Scaling

The FPS drop from 1080p to 4K is significant across all settings, but the pattern reveals where the bottleneck shifts. At Low settings, the average frame rate falls from 231.3 FPS at 1920x1080 to 194 FPS at 2560x1440, then drops sharply to 121.8 FPS at 3840x2160. This represents a 47.4% reduction from 1080p to 4K, indicating that even at Low settings, the GPU becomes the limiting factor at higher resolutions. The RTX 3080 Ti’s 12 GB of GDDR6X memory and 912.4 GB/s bandwidth are clearly being taxed as pixel count grows.

At Medium settings, the scaling is similar: 186.4 FPS at 1080p, 138.2 FPS at 1440p, and 86.3 FPS at 4K. The drop from 1440p to 4K here is 37.5%, which is less severe than the Low setting drop, suggesting that the CPU’s 8 cores and 16 threads are still contributing meaningfully at Medium. The Ryzen 7 5700X3D’s 96 MB of shared L3 cache helps maintain frame pacing, but the GPU’s workload increases disproportionately at 4K.

High settings show a more moderate scaling curve: 162.1 FPS at 1080p, 117.4 FPS at 1440p, and 77 FPS at 4K. This 52.5% reduction from 1080p to 4K is the largest relative drop among the presets, indicating that the combination of higher resolution and more demanding visuals pushes the GPU to its limits. The Ultra preset, however, tells a different story: 122.7 FPS at 1080p, 87.8 FPS at 1440p, and 56.7 FPS at 4K. The 4K result falls below 60 FPS, making it unsuitable for smooth competitive play.

The limiting component shifts clearly across resolutions. At 1080p Low, the CPU is the primary constraint, as the frame rate of 231.3 FPS approaches what the Ryzen 7 5700X3D can feed. By 1440p, the balance tilts toward the GPU, and at 4K, the RTX 3080 Ti is decisively the bottleneck. The data supports this: at 4K Ultra, the system produces only 56.7 FPS, which is a 53.8% drop from the 1080p Ultra result, demonstrating that the GPU’s 34.10 TFLOPS of FP32 compute is insufficient for maxed-out 4K in this title.

FAQ

*Q: What is the maximum average FPS this combo can achieve in Lockdown Protocol?*

A: The highest measured average is 231.3 FPS at 1920x1080 with Low settings.

Q: Can this system maintain 144 FPS at 1440p?

A: Yes, at Low and Medium settings, the combo achieves 194 FPS and 138.2 FPS respectively at 2560x1440. At High settings, it drops to 117.4 FPS, which is below 144 FPS.

Q: Is 4K gaming viable with this hardware?

A: At 4K, only Low settings (121.8 FPS) and Medium settings (86.3 FPS) exceed 60 FPS. High settings produce 77 FPS, while Ultra dips to 56.7 FPS, which is below the 60 FPS threshold.

Q: How does the RTX 3080 Ti compare to its nearest rivals in synthetic benchmarks?

A: The RTX 3080 Ti’s average benchmark score of 41,224 is 0.5% below the RTX 3090 (41,441), 0.9% below the AMD Radeon Pro 5300 (41,610), and 1.1% below the RTX 5070 (41,687).

Q: What is the CPU’s percentile ranking among all tested processors?

A: The Ryzen 7 5700X3D ranks in the 82nd percentile, with an average benchmark score of 24,673 across all tests.

Q: Which resolution and preset combination offers the best balance of performance and visual quality?

A: The data suggests 2560x1440 at High settings (117.4 FPS) provides a strong balance, as it maintains a high frame rate while offering more visual fidelity than Low or Medium presets.

GPU Role

The RTX 3080 Ti’s memory subsystem is a defining feature for this game. With 12 GB of GDDR6X memory on a 384-bit bus, the card delivers 912.4 GB/s of bandwidth, which is critical for Lockdown Protocol’s texture-heavy environments. The memory clock runs at 1188 MHz, translating to 19 Gbps effective, and this high bandwidth helps maintain consistent frame rates as resolution increases. The GPU’s 80 RT cores and 320 tensor cores are present but not directly utilized in the measured FPS data; however, they contribute to the card’s overall 83rd percentile ranking among all GPUs.

The clock speeds are modest for a high-end card: a base of 1365 MHz and a boost of 1665 MHz. These relatively low clocks, combined with the 350 W TDP, suggest the card relies on its 10,240 shading units and 112 ROPs to deliver performance. The pixel rate of 186.5 GPixel/s and texture rate of 532.8 GTexel/s are directly relevant to Lockdown Protocol’s rendering workload, and the data shows that at 1080p, the GPU is not the primary constraint except at Ultra settings. At 1440p and 4K, the GPU’s raw compute becomes the deciding factor, as evidenced by the FPS drops across presets.

The GPU’s nearest rival in synthetic benchmarks is the RTX 3090, which scores 41,441 versus the 3080 Ti’s 41,224, a 0.5% difference. This close margin explains why the 3080 Ti’s performance in Lockdown Protocol is consistent with expectations for a high-end Ampere card. The 8 nm process node and 28,300 million transistors on a 628 mm² die indicate a large, power-hungry chip, but the measured FPS at 1440p High (117.4 FPS) shows it handles mainstream resolutions well. The GPU’s 12 GB VRAM is adequate for this game at all tested settings, as no resolution or preset combination appears to exceed that capacity based on the FPS data.

How This Combo Ranks

The combo’s rank of 463 out of 1,637 tested combinations places it in the 72nd percentile of all systems tested for Lockdown Protocol. This is a strong showing, considering the CPU is not a top-tier part: the Ryzen 7 5700X3D has an 82nd percentile ranking among all CPUs, while the GPU sits at the 83rd percentile. The combination of an upper-midrange CPU with a high-end GPU produces results that are better than the sum of their parts, particularly at 1080p and 1440p.

The CPU’s nearest rivals in synthetic benchmarks provide context for its gaming performance. The Intel Core i7-1360P scores 24,627, a 0.2% difference from the Ryzen’s 24,673. The AMD Ryzen 5 7600X3D scores 24,605 (0.3% lower), and the Intel Core i5-11600 scores 24,559 (0.5% lower). These tiny margins mean that any of these CPUs would likely produce similar FPS in Lockdown Protocol when paired with the same GPU, confirming that the RTX 3080 Ti is the primary differentiator in this combo’s rank.

At 1080p, the combo’s performance is exceptional, with all presets exceeding 120 FPS. This suggests that the system is overkill for 1080p gaming, as even the Ultra preset at 122.7 FPS leaves headroom for a higher refresh rate display. At 1440p, the combo remains competitive, with High settings at 117.4 FPS and Ultra at 87.8 FPS, both suitable for high-refresh monitors. The 4K results are less impressive, with only Low and Medium presets exceeding 60 FPS, which is why the combo’s rank is not higher. Systems with more powerful GPUs, such as the RTX 3090 or newer RTX 5070, would likely rank higher at 4K, but at mainstream resolutions, this combo is well-positioned.

Settings Recommendations

The measured data supports a clear recommendation hierarchy based on resolution and desired frame rate. For 1920x1080, the Ultra preset is the best choice, as it delivers 122.7 FPS, which is well above the 60 FPS threshold and provides the highest visual quality among the four presets. The High preset at 162.1 FPS is also viable for competitive play, but the visual gains from Ultra are worth the 39.4 FPS cost. The Low preset at 231.3 FPS is unnecessary unless targeting a 240 Hz display, and the Medium preset at 186.4 FPS offers a middle ground.

At 2560x1440, the High preset is the recommended balance, achieving 117.4 FPS. This provides a smooth experience for most players while maintaining good visual fidelity. The Medium preset at 138.2 FPS is an alternative for those prioritizing frame rate over visuals, but the difference of 20.8 FPS is modest. The Ultra preset at 87.8 FPS is playable but leaves less headroom for demanding scenes, and the Low preset at 194 FPS sacrifices too much visual quality for the FPS gain.

For 3840x2160, the Medium preset is the only sensible choice for a playable experience, as it produces 86.3 FPS. The High preset at 77 FPS is acceptable but marginal, while the Low preset at 121.8 FPS is playable but visually compromised. The Ultra preset at 56.7 FPS falls below the 60 FPS threshold and should be avoided. The data indicates that this combo is best suited for 1440p High or 1080p Ultra, with 4K requiring a compromise on settings to maintain smooth frame rates.