Lockdown Protocol

Settings Recommendations

The measured FPS rows for Lockdown Protocol reveal a clear hierarchy across the four presets tested. At 1920x1080, the Low preset delivers 235.6 FPS average, which is the highest raw throughput recorded in the dataset. However, the jump from Low to Medium costs only 50.4 FPS (dropping to 185.2 FPS), while the visual quality improvement is substantial. The High preset further drops to 160.6 FPS, and Ultra sits at 123.4 FPS. For competitive play at 1080p, the Medium preset appears to be the sweet spot: it retains 185.2 FPS average, which is 49.6% higher than Ultra's 123.4 FPS, while avoiding the potentially stripped-down visuals of Low.

At 2560x1440, the pattern shifts. Medium produces 137.3 FPS average, High produces 119 FPS, and Ultra drops to 86.5 FPS. The gap between Medium and High here is only 18.3 FPS (13.3%), which is narrower than at 1080p where the same preset transition costs 24.6 FPS. This suggests that at higher resolution, the GPU becomes more of a limiting factor, making the preset choice less impactful on the CPU side. For 1440p, High at 119 FPS average seems the most balanced option—it stays above the 100 FPS threshold and the 18.3 FPS loss from Medium is a reasonable trade for the visual uplift.

At 3840x2160, the data tells a different story. Ultra drops to 56.5 FPS average, which is below the 60 FPS baseline that many players consider playable for a fast-paced FPS. High at 73.9 FPS and Medium at 85.4 FPS both clear that bar, with Medium offering a 15.5% advantage over High. Given that Ultra at 4K fails to maintain 60 FPS, the recommendation is to use High at 4K for the best balance of fidelity and frame rate, or Medium if the player prioritizes smoother motion.

GPU Role

The NVIDIA GeForce RTX 4070 brings 12 GB of GDDR6X memory on a 192-bit bus, yielding 504.2 GB/s of bandwidth. The GPU's boost clock is 2475 MHz, with a base clock of 1920 MHz. In Lockdown Protocol, the VRAM capacity appears sufficient across all tested resolutions and settings, as the measured FPS values do not show any catastrophic drops that would indicate memory swapping. The 4K Ultra result of 56.5 FPS average, while low, is still in a range that suggests the GPU is being pushed hard rather than hitting a memory wall.

The RTX 4070's 29.15 TFLOPS of FP32 compute and 46 RT cores are relevant for a modern FPS title. The data shows that at 1080p Low, the GPU delivers 235.6 FPS, which is likely close to the game's engine ceiling given the CPU's capabilities. Moving to 4K Ultra, the same GPU drops to 56.5 FPS—a 76% reduction from the 1080p Low figure. This scaling indicates that the RTX 4070 is the primary driver of performance at higher resolutions, with its 504.2 GB/s bandwidth and 64 ROPs becoming the constraining factors. The pixel rate of 158.4 GPixel/s and texture rate of 455.4 GTexel/s are the specifications that likely dictate how the card handles the increasing pixel count from 1080p to 4K.

How This Combo Ranks

In the database of tested combos for Lockdown Protocol, the AMD Ryzen 7 5700X3D paired with the NVIDIA GeForce RTX 4070 ranks 465th out of 1637 combinations. This places the combo in the top 28.4% of all tested configurations. The rank reflects the overall performance across all measured resolutions and settings, not just a single point.

The CPU's benchmark data shows an average score of 24673, which places it in the 82nd percentile of all CPUs tested. Its nearest rival, the Intel Core i7-1360P, scores 24627, which is 0.2% lower. The AMD Ryzen 5 7600X3D is 0.3% behind at 24605, and the Intel Core i5-11600 trails by 0.5% with 24559. On the GPU side, the RTX 4070's average benchmark score is 37283, putting it in the 81st percentile of all GPUs. The nearest rival, the AMD Radeon RX Vega 56, scores 37507, which is 0.6% higher. The NVIDIA GeForce RTX 4080 Mobile is 2.2% ahead at 38135, while the AMD Radeon RX 5300M is 2.5% behind at 36371.

The combo rank of 465 out of 1637 suggests that this pairing is solidly mid-to-upper tier for Lockdown Protocol. The CPU's strong multi-threaded performance (Cinebench R23 multicore score of 22366) and the GPU's high compute throughput (29.15 TFLOPS) combine to handle the game's demands well, but there are 464 other combos that achieve higher aggregate FPS. Given that the CPU and GPU both sit near the 82nd and 81st percentiles respectively, a rank in the 28th percentile of combos indicates that the pairing is balanced—neither component is severely bottlenecking the other.

Measured FPS Breakdown

At 1920x1080, the measured FPS values are: Low 235.6, Medium 185.2, High 160.6, and Ultra 123.4. The step from Low to Medium costs 50.4 FPS (21.4% reduction), Medium to High costs 24.6 FPS (13.3% reduction), and High to Ultra costs 37.2 FPS (23.2% reduction). The Ultra preset at 1080p still delivers 123.4 FPS, which is above the 120 FPS threshold that many competitive players target.

At 2560x1440, the values are: Low 192, Medium 137.3, High 119, and Ultra 86.5. The Low to Medium drop is 54.7 FPS (28.5%), Medium to High is 18.3 FPS (13.3%), and High to Ultra is 32.5 FPS (27.3%). The Ultra preset at 1440p falls below 90 FPS, making it less desirable for high-refresh-rate monitors.

At 3840x2160, the values are: Low 126, Medium 85.4, High 73.9, and Ultra 56.5. The Low to Medium drop is 40.6 FPS (32.2%), Medium to High is 11.5 FPS (13.5%), and High to Ultra is 17.4 FPS (23.5%). At 4K, even the Low preset only achieves 126 FPS, while Ultra dips below 60 FPS.

The pattern across all resolutions shows that the Medium to High transition consistently costs about 13% of performance, while the High to Ultra transition costs between 23-27%. This suggests the Ultra preset introduces a heavier rendering load that is disproportionately expensive relative to the Medium to High step.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic across all settings. At Low settings, the drop from 235.6 FPS (1080p) to 126 FPS (4K) represents a 46.5% reduction. At Medium, the drop is from 185.2 FPS to 85.4 FPS, a 53.9% reduction. At High, the drop is from 160.6 FPS to 73.9 FPS, a 54.0% reduction. At Ultra, the drop is from 123.4 FPS to 56.5 FPS, a 54.2% reduction.

The consistency of the percentage drop (roughly 54% for Medium, High, and Ultra) indicates that the RTX 4070 is scaling predictably with resolution. The 4K resolution has 4 times the pixels of 1080p, but the FPS does not drop to 25% of the 1080p value—it drops to roughly 46-54% of the original. This sub-linear scaling suggests that the game is not purely pixel-bound; there are other bottlenecks in the rendering pipeline.

The Low preset shows a smaller percentage drop (46.5%) compared to the higher presets. This is curious—it implies that at Low settings, the CPU is able to keep the GPU more fully utilized even at 4K. The 1080p Low result of 235.6 FPS is likely near the CPU's limit for frame generation, meaning the GPU has headroom. As resolution increases, the GPU becomes more loaded, but the CPU is still feeding frames fast enough at Low settings. At Ultra settings, the GPU is the clear limiting factor, as evidenced by the steep drop to 56.5 FPS at 4K.

The data indicates that the Ryzen 7 5700X3D with its 8 cores and 16 threads is capable of driving high frame rates at 1080p, but the RTX 4070 becomes the bottleneck as resolution scales up. The 3D V-Cache (96 MB shared L3) likely helps maintain consistent frame pacing in CPU-bound scenarios, which is reflected in the relatively modest FPS drop from 1080p to 1440p at Low settings (235.6 to 192, an 18.5% reduction).

FAQ

Q: What is the best resolution to play Lockdown Protocol with this combo?

A: Based on the measured FPS, 1920x1080 with Medium settings provides 185.2 FPS average, which is high enough for competitive play while maintaining visual quality. At 2560x1440, High settings at 119 FPS is a strong choice. At 3840x2160, only Low settings (126 FPS) or Medium settings (85.4 FPS) maintain playable frame rates above 60 FPS.

Q: Is the Ultra preset worth using with this hardware?

A: At 1080p, Ultra delivers 123.4 FPS, which is still smooth. At 1440p, Ultra drops to 86.5 FPS, and at 4K it falls to 56.5 FPS. The data shows Ultra costs 23-27% more performance than High across resolutions, so it is only advisable at 1080p or if the player prioritizes visuals over frame rate at 1440p.

Q: How does this combo rank compared to other tested systems?

A: The combo ranks 465th out of 1637 tested combinations for Lockdown Protocol, placing it in the top 28.4%. The CPU is in the 82nd percentile of all CPUs, and the GPU is in the 81st percentile of all GPUs, indicating a balanced pairing.

Q: What is the CPU's multi-threaded performance profile?

A: The Ryzen 7 5700X3D has 8 cores and 16 threads, with a Cinebench R23 multicore score of 22366 and a single-core score of 3157. Its 96 MB of shared L3 cache is notable for gaming workloads, and its PassMark multithread score is 26318.

Q: How does the GPU's memory configuration affect 4K performance?

A: The RTX 4070 has 12 GB of GDDR6X memory with a 192-bit bus and 504.2 GB/s bandwidth. At 4K Ultra, the combo achieves 56.5 FPS, which is below the 60 FPS threshold. The bandwidth appears sufficient for the game's needs at 4K Medium, which delivers 85.4 FPS.

Q: What is the difference between the 1080p and 4K performance at the same settings?

A: At Low settings, the drop from 1080p to 4K is 109.6 FPS (from 235.6 to 126). At Medium, the drop is 99.8 FPS (from 185.2 to 85.4). At High, the drop is 86.7 FPS (from 160.6 to 73.9). At Ultra, the drop is 66.9 FPS (from 123.4 to 56.5).

CPU Role

The AMD Ryzen 7 5700X3D is an 8-core, 16-thread processor based on Zen 3 architecture, built on TSMC's 7 nm process. It has a base clock of 3.00 GHz and a boost clock of 4.10 GHz, with 96 MB of shared L3 cache. This large cache is the defining feature of the X3D line and is designed to reduce memory latency in gaming workloads. The CPU supports DDR4 memory with dual-channel configuration and 51.2 GB/s of bandwidth.

In Lockdown Protocol, the CPU's role is most evident at 1080p Low, where the combo achieves 235.6 FPS. This high frame rate suggests the CPU is capable of feeding the GPU with enough draw calls and game logic updates to sustain that level. The CPU's PassMark single-thread score of 2970 and Cinebench R23 single-core score of 3157 indicate strong per-core performance, which is critical for FPS games that often have a primary game thread.

The 3D V-Cache's impact can be inferred from the scaling behavior. At 1080p Low, the FPS is 235.6, and at 1440p Low, it drops to 192—an 18.5% reduction. This relatively modest drop (compared to the 46.5% drop from 1080p to 4K at Low) suggests that the CPU is handling the increased pixel count well, likely because the large L3 cache reduces the performance penalty of accessing main memory for frequently used game data.

The CPU's benchmark scores show it competes closely with several rivals. In the 3DMark 16-thread test, it scores 6764, and its Cinebench R20 multicore score is 9393. The PassMark multithread score of 26318 places it in the 82nd percentile of all CPUs. The nearest rival, the Intel Core i7-1360P, is only 0.2% behind in average benchmark score, indicating that the 5700X3D is well-matched against modern mobile processors despite being a desktop part from the 5000 series.

The CPU's 105 W TDP and AMD Socket AM4 compatibility make it a straightforward upgrade for existing AM4 platforms. Its PCIe Gen 4 support with 20 lanes ensures the RTX 4070 can run at full bandwidth. The combination of 8 cores, 16 threads, and 96 MB of L3 cache appears well-suited to Lockdown Protocol's demands, as evidenced by the combo's ability to maintain high frame rates at 1080p and 1440p across most settings.