Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 5 7500F + NVIDIA GeForce RTX 3080 Ti

The AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 3080 Ti delivers a compelling 1080p and 1440p experience in Lockdown Protocol, but 4K Ultra pushes the combo to its limits. This 6-core, 12-thread Zen 4 processor with a 5.00 GHz boost clock combines with the Ampere-based GA102 GPU to produce frame rates that range from a blistering 259 FPS at 1080p Low to a playable but demanding 57 FPS at 4K Ultra. The data reveals a system that is clearly GPU-limited at higher resolutions, while the CPU's strong single-thread performance keeps minimums respectable across most settings.

Resolution Scaling

The FPS scaling from 1080p to 4K tells a clear story about where the bottleneck shifts in this combo. At 1080p Low, the system produces 259 FPS, but dropping to 1440p Low reduces that to 190 FPS — a 27% decrease. Moving further to 4K Low yields 122 FPS, which is 53% below the 1080p Low figure. This steep decline indicates that the RTX 3080 Ti's rendering workload is scaling heavily with pixel count, while the Ryzen 5 7500F is not the limiting factor at these lower settings.

The pattern holds across all quality presets. At High settings, the system delivers 161 FPS at 1080p, 118 FPS at 1440p (27% lower), and 76 FPS at 4K (53% lower than 1080p). The consistency of these percentage drops across presets suggests that resolution is the dominant variable, regardless of graphical complexity. For Ultra settings, the numbers are 120 FPS at 1080p, 88 FPS at 1440p, and 57 FPS at 4K — again showing a similar proportional decline.

The 4K Ultra result of 57 FPS is particularly telling. It represents a 78% drop from the 1080p Low maximum of 259 FPS. This wide spread indicates that the GPU is the primary constraint at 4K, especially with Ultra settings. The RTX 3080 Ti, with its 12 GB of GDDR6X memory and 912.4 GB/s bandwidth, is being pushed hard at this resolution. Meanwhile, the CPU's 6 cores and 12 threads, boosted by a 5.00 GHz clock, appear sufficient to feed the GPU even at lower resolutions where frame rates exceed 200 FPS.

The 1440p Medium setting provides a useful midpoint: 135 FPS average with a minimum of 115 FPS and a maximum of 155 FPS. This 40 FPS spread between min and max suggests some scene-dependent variability, but the minimum remains well above the 60 FPS threshold. At 1080p Medium, the spread is even wider — 156 FPS minimum to 211 FPS maximum — indicating that the CPU is capable of driving very high frame rates but that GPU load fluctuates with scene complexity.

How This Combo Ranks

This specific combination of AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3080 Ti ranks 936th out of 3,714 tested combos in Lockdown Protocol. That places it in the 74.8th percentile of all tested configurations, meaning roughly three-quarters of all combos tested perform worse. The ranking reflects a strong mid-to-high-tier setup that is capable of excellent frame rates but not at the very top of the leaderboard.

The CPU itself sits in the 77th percentile among all processors, with an average benchmark score of 24,964. Its nearest rivals in the synthetic benchmarks show how tightly packed this segment is: the Intel Core i7-11850H scores 24,935 (0.1% higher), the AMD Ryzen 5 8400F scores 25,005 (0.2% higher), the Intel Core i7-13620H scores 24,911 (0.2% lower), and the Intel Core 5 210H scores 24,872 (0.4% lower). These deltas are minuscule, indicating that the Ryzen 5 7500F's gaming performance is highly competitive with these alternatives, though none of those CPUs are paired with the RTX 3080 Ti in this data.

The GPU, meanwhile, ranks in the 83rd percentile among all graphics cards with an average benchmark score of 41,187. Its nearest rivals include the AMD Radeon Pro 5300 at 40,870 (0.8% higher), the NVIDIA Tesla M40 24 GB at 41,707 (1.2% lower), the NVIDIA Tesla M40 at 41,897 (1.7% lower), and the NVIDIA GeForce RTX 5070 at 40,377 (2% higher). The RTX 3080 Ti's position among these rivals shows it remains a potent GPU despite being from the previous generation, with the RTX 5070 being the only modern consumer card in the comparison group.

The gap between the combo's 74.8th percentile ranking and the individual component percentiles (77th for CPU, 83rd for GPU) suggests that Lockdown Protocol may not fully utilize the hardware's potential. The game's 2024 release date means it likely benefits from newer architectural features, but the measured results indicate the combo still performs strongly relative to the broader field.

FAQ

Q: What is the best resolution for this combo in Lockdown Protocol?

A: The measured data shows that 1440p High delivers 118 FPS average, which is well above the 60 FPS threshold for smooth gameplay. At 4K High, the average drops to 76 FPS, which is still playable but leaves less headroom.

Q: How does the CPU compare to its direct rivals?

A: The AMD Ryzen 5 7500F has an average benchmark score of 24,964, which is within 0.4% of its nearest rivals. The Intel Core i7-11850H is 0.1% higher, the AMD Ryzen 5 8400F is 0.2% higher, the Intel Core i7-13620H is 0.2% lower, and the Intel Core 5 210H is 0.4% lower.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1080p, Low settings produce 259 FPS average, while Ultra produces 120 FPS average. That is a 139 FPS difference, or roughly 54% lower performance at Ultra compared to Low.

Q: Does the RTX 3080 Ti outperform the RTX 5070 in this game?

A: Based on the benchmark data, the RTX 3080 Ti has an average score of 41,187, while the RTX 5070 has an average score of 40,377. The RTX 3080 Ti is 2% higher, though this is a synthetic benchmark comparison, not a direct in-game measurement.

Q: Is the combo more CPU-limited or GPU-limited at 4K?

A: The data suggests GPU limitation at 4K. The FPS drops from 122 at 4K Low to 57 at 4K Ultra, a 53% reduction, while the CPU's role remains constant. The wide spread across settings at the same resolution indicates the GPU is the bottleneck.

Q: What is the minimum FPS recorded for this combo?

A: The lowest minimum FPS recorded is 74 FPS at 4K Medium settings. The minimum FPS data is only available for Medium settings across all resolutions: 74 FPS at 4K, 115 FPS at 1440p, and 156 FPS at 1080p.

Measured FPS Breakdown

At 1920x1080, the system produces its highest frame rates across all settings. Low settings yield an average of 259 FPS, which is the single highest measured value for this combo. Medium settings deliver 184 FPS average with a minimum of 156 FPS and a maximum of 211 FPS. High settings produce 161 FPS average, while Ultra settings drop to 120 FPS average. The 139 FPS spread between Low and Ultra at this resolution demonstrates the significant impact of graphical quality on performance.

The 2560x1440 results show a clear step down from 1080p. Low settings average 190 FPS, Medium averages 135 FPS with a minimum of 115 FPS and maximum of 155 FPS, High averages 118 FPS, and Ultra averages 88 FPS. The Medium setting's 40 FPS spread between minimum and maximum is notable, suggesting that certain scenes or actions in Lockdown Protocol create heavier GPU loads. Even at Ultra, the 88 FPS average is comfortably above 60 FPS, making 1440p a strong choice for this combo.

At 3840x2160, performance becomes more constrained. Low settings average 122 FPS, which is still excellent for 4K gaming. Medium settings average 87 FPS with a minimum of 74 FPS and maximum of 100 FPS. High settings drop to 76 FPS average, and Ultra falls to 57 FPS average. The Ultra result is the only measured setting that falls below the 60 FPS threshold, indicating that 4K Ultra is the most demanding configuration for this hardware. The Medium setting's minimum of 74 FPS shows that even at 4K, the combo can maintain playable frame rates with some settings headroom.

The complete dataset shows a consistent pattern: each increase in resolution reduces FPS by roughly 27-30% per step, and each increase in settings quality reduces FPS by about 20-35% per step. The combination of both factors — moving from 1080p Low to 4K Ultra — results in a 78% total reduction from 259 FPS to 57 FPS.

Settings Recommendations

The optimal settings for this combo depend on the target resolution. At 1080p, the data shows that High settings at 161 FPS provide an excellent balance, as the jump from High to Ultra costs 41 FPS (25% reduction) for what is typically a marginal visual improvement. However, for competitive play, Low settings at 259 FPS offer the maximum frame rate advantage, potentially reducing input latency.

At 1440p, High settings at 118 FPS represent the best experience per the measured rows. The Medium setting at 135 FPS offers a 14% improvement but with a wider minimum-to-maximum spread (115 to 155 FPS), while Ultra at 88 FPS drops below the 100 FPS threshold that many high-refresh-rate monitors target. The 118 FPS average at High provides a strong balance between visual fidelity and performance.

For 4K, Medium settings at 87 FPS with a 74 FPS minimum is the recommended choice. The High setting at 76 FPS is still playable, but the Medium setting's 11 FPS advantage (14% higher) provides more headroom for demanding scenes. Ultra at 57 FPS is the only measured configuration that falls below 60 FPS, making it unsuitable for smooth gameplay despite the visual benefits.

Across all resolutions, the Medium preset shows the most consistent performance with recorded minimums and maximums. At 1080p Medium, the 156 FPS minimum ensures the frame rate never drops below the refresh rate of most standard monitors. At 1440p Medium, the 115 FPS minimum keeps the experience smooth on 120 Hz displays. At 4K Medium, the 74 FPS minimum is close to the 60 FPS threshold but remains above it.

CPU Role

The AMD Ryzen 5 7500F is a 6-core, 12-thread processor based on the Zen 4 architecture, manufactured on TSMC's 5 nm process. It features a base clock of 3.70 GHz and a boost clock of 5.00 GHz, with 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. This configuration provides strong single-thread performance, as evidenced by its 3DMark single-thread score of 974 and Cinebench R23 single-core score of 3,218.

In Lockdown Protocol, the CPU's role is primarily to feed the GPU with draw calls and game logic. The data shows that at 1080p Low, the system reaches 259 FPS, which suggests the CPU is capable of very high frame rates. The 3DMark 2-thread score of 1,902 and 4-thread score of 3,621 indicate that the processor handles lightly-threaded workloads well, which is typical for FPS games that often rely on 2-4 primary threads.

The CPU's multi-threaded performance is also solid, with Cinebench R23 multicore score of 22,799 and Geekbench multicore score of 12,362. However, the 3DMark 16-thread score of 6,376 is nearly identical to the max-thread score of 6,379, indicating that the processor's 12 threads are fully utilized without additional scaling. This suggests that Lockdown Protocol likely does not require more than 12 threads, and the Ryzen 5 7500F's 6 cores are sufficient for this game.

The CPU's position in the 77th percentile among all processors, with a 0.1% delta to the Intel Core i7-11850H and 0.2% delta to the AMD Ryzen 5 8400F, shows that it is a competitive mid-range option. The 65 W TDP and 5 nm process node contribute to efficient operation, though the measured FPS data does not include power consumption figures. The boost clock of 5.00 GHz is particularly relevant for gaming, as higher clock speeds directly translate to faster single-threaded performance in FPS titles.

The combination of 6 cores and 12 threads at 5.00 GHz boost appears well-matched for Lockdown Protocol at 1080p and 1440p, where the GPU becomes the limiting factor. At 4K, the CPU's performance is less relevant, as the RTX 3080 Ti is clearly the bottleneck. The measured FPS data does not show any signs of CPU-induced stuttering or frame pacing issues, as the minimum FPS values at Medium settings are close to the averages across all resolutions.