Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 5 9600X + NVIDIA GeForce RTX 5070

The AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 5070 delivers a strong 1080p and 1440p experience in Lockdown Protocol, but the Ultra preset at 4K pushes the combo below the 60 FPS threshold. The measured data shows a system that scales predictably with resolution and settings, with the CPU's 6-core/12-thread configuration proving sufficient at lower resolutions while the GPU's 12 GB VRAM and 192-bit bus become the limiting factor at 4K Ultra. This combo ranks 298th out of 1637 tested configurations, placing it in the top 18% of all tested systems for this FPS title.

Resolution Scaling

The FPS drop from 1080p to 4K is steep but consistent across all settings presets. At High settings, the average frame rate falls from 176.6 FPS at 1080p to 128.0 FPS at 1440p, then to 84.4 FPS at 4K — a cumulative reduction of roughly 52% from 1080p to 4K. The Low preset shows the most dramatic scaling: 282.0 FPS at 1080p drops to 205.2 FPS at 1440p and further to 132.9 FPS at 4K. This represents a 53% total decline, indicating that even at the lowest graphical settings, the resolution increase places substantial load on the rendering pipeline.

The Medium preset follows a similar trajectory: 199.3 FPS at 1080p, 148.9 FPS at 1440p, and 96.5 FPS at 4K — a 52% drop. Ultra settings show the largest absolute reduction: from 128.6 FPS at 1080p to 97.5 FPS at 1440p, then down to 61.5 FPS at 4K. The 4K Ultra figure is 52% lower than the 1080p Ultra result, matching the pattern seen in other presets. This uniform scaling percentage across all settings strongly suggests that resolution, rather than specific graphical features, dominates the performance curve.

The data indicates the GPU is the primary bottleneck at 4K. At 1080p, the CPU's single-thread performance of 1253 in 3DMark and 3603 in Cinebench R23 single-core allows the GPU to stretch its legs, producing 282 FPS on Low. But at 4K, the RTX 5070's 30.87 TFLOPS FP32 throughput and 672.0 GB/s memory bandwidth are taxed heavily, pulling averages down to 132.9 FPS even on Low. The consistent 52% scaling pattern implies that pixel throughput, not scene complexity, is the constraining factor at higher resolutions.

CPU Role

The Ryzen 5 9600X brings 6 cores and 12 threads based on the Zen 5 architecture, codenamed Granite Ridge, manufactured on TSMC's 4 nm process. Its base clock of 3.90 GHz and boost clock of 5.40 GHz provide the single-thread headroom that Lockdown Protocol, as an FPS title, likely leverages for game logic and physics. The CPU's 3DMark single-thread score of 1253 and multi-thread score of 7590 indicate strong per-core performance, which aligns with the game's scaling behavior at 1080p where the GPU is less stressed.

At 1080p Low, the combo achieves 282.0 FPS, a figure that suggests the CPU can feed the GPU adequately at high frame rates. The 32 MB shared L3 cache and DDR5 dual-channel memory support with 89.6 GB/s bandwidth help maintain consistent frame delivery. The CPU's percentile ranking of 85 versus all CPUs places it above the vast majority of processors, and its average benchmark score of 28246 is within 0.3% of the Intel Core i5-13490F and AMD Ryzen 5 230, and 0.4% behind the AMD Ryzen 7 8845HS.

The 9600X's 65 W TDP and 4 nm process node contribute to efficiency, though the measured FPS data does not show thermal throttling patterns — the frame rates remain consistent across the resolution spectrum. In 3DMark 16-thread testing, the CPU scores 7585, nearly matching its max-thread score of 7590, indicating the 6-core/12-thread configuration scales well with available threads. For Lockdown Protocol, the CPU appears to be a capable partner, never becoming the primary limiter until frame rates exceed 280 FPS at 1080p Low.

GPU Role

The RTX 5070 is built on the Blackwell 2.0 architecture with the GB205 chip, featuring 6144 shading units, 48 RT cores, and 192 tensor cores. Its 12 GB of GDDR7 memory on a 192-bit bus delivers 672.0 GB/s bandwidth, which becomes critical at 4K resolutions where texture data demands increase. The GPU's base clock of 2325 MHz and boost clock of 2512 MHz, combined with 30.87 TFLOPS FP32 performance, drive the measured frame rates across all presets.

The GPU's average benchmark score of 41687 places it in the 83rd percentile of all GPUs. Its nearest rival, the AMD Radeon Pro 5300, scores 41610 (0.2% lower), while the NVIDIA GeForce RTX 3090 scores 41441 (0.6% lower). This positioning suggests the RTX 5070 provides performance slightly above the RTX 3090 in synthetic tests, though real-world game performance depends on driver optimization and specific game engines.

At 4K Ultra, the combo manages only 61.5 FPS, which indicates the GPU is heavily loaded. The 12 GB VRAM capacity, while sufficient for most current titles, may approach its limits at 4K with Ultra textures in Lockdown Protocol. The 192-bit memory bus, narrower than some high-end competitors, contributes to the 672.0 GB/s bandwidth figure. The GPU's passmark G3D score of 29137 and DirectX 12 score of 108 show strong API support, with DirectX 12 Ultimate (12_2) compatibility ensuring modern rendering features are available.

The scaling from Medium to High at 4K (96.5 to 84.4 FPS, a 12.5% drop) and from High to Ultra (84.4 to 61.5 FPS, a 27% drop) reveals that the Ultra preset imposes significantly heavier shading and memory loads. The GPU's 80 ROPs and 192 TMUs handle pixel processing at a pixel rate of 201.0 GPixel/s and texture rate of 482.3 GTexel/s, but the 4K Ultra workload still pushes the system to its limits.

Settings Recommendations

The measured FPS data provides clear guidance for optimal settings. At 1080p, all presets deliver playable frame rates, with High at 176.6 FPS and Ultra at 128.6 FPS — both well above the 60 FPS threshold for smooth gameplay. The Medium preset at 199.3 FPS offers a good balance, but High provides the best combination of visual fidelity and performance for most players at this resolution.

At 1440p, the High preset at 128.0 FPS is the recommended choice. It maintains high frame rates while offering better visual quality than Medium (148.9 FPS) or Low (205.2 FPS). The Ultra preset at 97.5 FPS remains playable and may appeal to players prioritizing visual quality, but the 24% performance drop from High to Ultra may not justify the visual gains for competitive play.

At 4K, the recommendation shifts decisively. The Ultra preset at 61.5 FPS barely exceeds the 60 FPS threshold, leaving little headroom for demanding scenes. The High preset at 84.4 FPS provides a more comfortable margin and is the best choice for 4K gaming. Medium at 96.5 FPS offers even more headroom for players who prefer higher frame rates over visual fidelity. Low at 132.9 FPS is viable for competitive play, though the visual compromise is significant. The data shows that High at 4K delivers 37% more performance than Ultra while incurring a moderate visual penalty, making it the sweet spot for this combo.

FAQ

Q: Can this combo achieve 60 FPS at 4K Ultra in Lockdown Protocol?

A: Yes, the measured average FPS at 3840x2160 with Ultra settings is 61.5 FPS, which is just above the 60 FPS threshold. However, the margin is slim, and demanding scenes may cause dips below 60 FPS.

Q: What is the best preset for 1440p gaming with this combo?

A: The High preset at 2560x1440 delivers 128.0 FPS, offering the best balance between visual quality and performance. Ultra runs at 97.5 FPS, which is also playable but represents a 24% performance reduction.

Q: How does the RTX 5070 compare to the RTX 3090 in synthetic benchmarks?

A: The RTX 5070's average benchmark score of 41687 is 0.6% higher than the RTX 3090's score of 41441, indicating slightly better synthetic performance. The RTX 5070 also outperforms the AMD Radeon Pro 5300 by 0.2% and the AMD Radeon Pro 580X by 0.7%.

Q: Is the Ryzen 5 9600X a bottleneck at 1080p Low settings?

A: At 1080p Low, the combo achieves 282.0 FPS, which is the highest measured result across all configurations. The CPU's single-thread score of 1253 in 3DMark and 3603 in Cinebench R23 suggests it can keep pace with the GPU at these high frame rates.

Q: What frame rate can I expect at 4K Medium settings?

A: The measured average FPS at 3840x2160 with Medium settings is 96.5 FPS. This is 57% higher than the Ultra preset's 61.5 FPS, making Medium a strong choice for 4K gaming with this combo.

Q: How does this combo rank among all tested configurations for Lockdown Protocol?

A: This combo ranks 298th out of 1637 tested combinations, placing it in the top 18.2% of all systems tested for this game. The CPU ranks in the 85th percentile of all CPUs, and the GPU ranks in the 83rd percentile of all GPUs.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce 282.0 FPS, Medium yields 199.3 FPS, High achieves 176.6 FPS, and Ultra reaches 128.6 FPS. The gap between Low and Ultra is 153.4 FPS, representing a 54% reduction. The step from Medium to High is relatively small at 22.7 FPS, while the jump from High to Ultra costs 48.0 FPS.

At 2560x1440, performance remains strong across all presets. Low settings average 205.2 FPS, Medium runs at 148.9 FPS, High delivers 128.0 FPS, and Ultra produces 97.5 FPS. The transition from Low to Ultra costs 107.7 FPS (52% reduction). Medium to High shows a 20.9 FPS drop, while High to Ultra costs 30.5 FPS.

At 3840x2160, the GPU becomes the limiting factor. Low settings still manage 132.9 FPS, Medium achieves 96.5 FPS, High runs at 84.4 FPS, and Ultra drops to 61.5 FPS. The cumulative reduction from Low to Ultra is 71.4 FPS (54% lower). The Medium to High step costs 12.1 FPS, while High to Ultra costs 22.9 FPS, showing that the Ultra preset imposes the heaviest load.

Across all resolutions, the Low preset consistently delivers roughly 2.1 to 2.3 times the frame rate of the Ultra preset. The scaling from 1080p to 4K at any given preset reduces performance by approximately 52-54%, indicating that resolution scaling is uniform regardless of settings level.

How This Combo Ranks

The AMD Ryzen 5 9600X + NVIDIA GeForce RTX 5070 combination ranks 298th out of 1637 tested configurations in Lockdown Protocol, placing it in the top 18.2% of all systems tested. This is a strong showing, though not elite — the top 17% of combos achieve higher frame rates, likely featuring higher-end GPUs or CPUs with more cores.

The CPU component itself ranks in the 85th percentile of all CPUs, with an average benchmark score of 28246. Its nearest rivals in synthetic testing are the Intel Core i5-13490F (28173, 0.3% lower), AMD Ryzen 5 230 (28164, 0.3% lower), AMD Ryzen 7 8845HS (28369, 0.4% higher), and Intel Core i5-14500T (28377, 0.5% higher). This tight clustering indicates the 9600X performs near the top of its class in general benchmarks.

The GPU ranks in the 83rd percentile of all GPUs with an average benchmark score of 41687. Its nearest rivals include the AMD Radeon Pro 5300 (41610, 0.2% lower), NVIDIA GeForce RTX 3090 (41441, 0.6% lower), NVIDIA Tesla M40 (41897, 0.5% higher), and AMD Radeon Pro 580X (41991, 0.7% higher). The RTX 5070 sits at the edge of the 40-series performance envelope, slightly trailing the Tesla M40 and Radeon Pro 580X in synthetic tests while leading the RTX 3090.

The combination's ranking of 298 out of 1637 means it outperforms roughly 82% of tested systems. This places it in the upper quintile, suitable for high-refresh-rate 1080p and 1440p gaming, with 4K Ultra playable at 61.5 FPS. The data confirms this combo is well-matched for Lockdown Protocol, with neither component dramatically outpacing the other across the tested resolutions and settings.