Lockdown Protocol

# Lockdown Protocol with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5050

The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 5050 delivers a decidedly mixed experience in Lockdown Protocol, landing at rank 1739 out of 2828 tested combos. The data reveals a system that excels at lower resolutions and settings, but struggles to maintain playable framerates at 4K with higher quality presets. The combination of a 6-core Zen 4 processor and an 8 GB Blackwell GPU produces results that are heavily dependent on resolution and settings, with the GPU clearly becoming the limiting factor as pixel count rises.

Resolution Scaling

The measured FPS data shows a clear and predictable pattern: performance drops substantially as resolution increases from 1080p to 4K. At High settings, the average framerate falls from 104 FPS at 1920x1080 to 76 FPS at 2560x1440, then down to 49 FPS at 3840x2160. This represents a 27% reduction moving from 1080p to 1440p, and a further 36% reduction moving from 1440p to 4K. The total drop from 1080p High to 4K High is 55 FPS, or roughly 53% of the starting performance.

Low settings show a similar scaling pattern but with higher absolute numbers. At 1920x1080 Low, the combo achieves 168 FPS, dropping to 123 FPS at 2560x1440 and 79 FPS at 3840x2160. The percentage drops are consistent: 27% from 1080p to 1440p, and 36% from 1440p to 4K. This consistency across settings suggests that resolution scaling is driven primarily by the GPU's pixel throughput capabilities rather than by settings-specific effects.

Medium settings tell the same story with slightly lower numbers: 119 FPS at 1080p, 87 FPS at 1440p, and 56 FPS at 4K. The gap between 1080p and 1440p Medium is 32 FPS (27% drop), while 1440p to 4K Medium shows a 31 FPS drop (36% reduction). Ultra settings produce the lowest framerates across the board: 78 FPS at 1080p, 57 FPS at 1440p, and 37 FPS at 4K, with percentage drops of 27% and 35% respectively.

The scaling behavior indicates that Lockdown Protocol is heavily GPU-bound at higher resolutions. The RTX 5050's 128-bit memory bus and 320.0 GB/s bandwidth appear to be the constraining factor at 4K, where the pixel workload increases dramatically. At 1080p, the GPU has enough headroom to push framerates well above 100 FPS on most settings, but the 4K results suggest the card is operating near its limits even at Low settings.

Settings Recommendations

The measured data provides clear guidance for optimizing the experience in Lockdown Protocol. Medium settings offer the best balance of visual quality and performance across all three resolutions. At 1920x1080 Medium, the combo delivers 119 FPS average with a minimum of 101 FPS and maximum of 137 FPS, providing smooth gameplay with room for occasional frame drops without dipping below 100 FPS. The 1440p Medium result of 87 FPS (min 74, max 100) remains playable for most users, though those with high-refresh-rate monitors may notice the lower average.

High settings are viable at 1080p and 1440p, with 104 FPS and 76 FPS respectively. The 1080p High result is particularly strong, offering improved visual fidelity while maintaining triple-digit averages. At 1440p High, the 76 FPS average is acceptable for slower-paced gameplay but may feel less responsive in competitive scenarios. The 4K High result of 49 FPS falls below the generally accepted threshold for smooth gameplay in a first-person shooter.

Ultra settings are only recommended for 1080p, where the combo achieves 78 FPS average. This provides a playable experience with maximum visual quality, though the margin for error is thinner than at Medium. At 1440p Ultra, the 57 FPS average begins to feel sluggish for an FPS title, and 4K Ultra at 37 FPS is effectively unplayable for competitive play. The data suggests that Ultra settings at 1440p or above should be avoided unless the user prioritizes visual fidelity over responsiveness.

For users targeting 4K, Low settings at 79 FPS is the only option that approaches playability. The gap between Low and Medium at 4K is 23 FPS, highlighting how much headroom the lower preset provides. However, even at Low settings, the 4K experience lacks the smoothness of 1080p Medium, making 1440p Medium the recommended sweet spot for most users.

GPU Role

The NVIDIA GeForce RTX 5050 is the primary determinant of performance in Lockdown Protocol, particularly at higher resolutions. The GPU features 8 GB of GDDR6 memory on a 128-bit bus, delivering 320.0 GB/s of bandwidth. The card's base clock of 2317 MHz and boost clock of 2572 MHz, combined with 2560 shading units and 80 texture mapping units, drive its compute capabilities. The 32 ROPs and 20 RT cores contribute to the card's overall throughput, though the standard rasterization performance is what matters most in this title.

The GPU's benchmark scores place it at the 66th percentile among all GPUs, with an average benchmark score of 21035. Its nearest rivals include the AMD Radeon RX Vega M GL (average score 21153, deltaPct -0.6), AMD Radeon HD 8970M (average score 21237, deltaPct -1), AMD Radeon RX 5600 XT (average score 20713, deltaPct 1.6), and NVIDIA RTX A4000 Mobile (average score 21379, deltaPct -1.6). These comparisons show the RTX 5050 performing within a narrow band of its peers, with no rival exceeding it by more than 1.6% or falling behind by more than 1%.

The 8 GB VRAM capacity is sufficient for the resolutions tested, but the 128-bit memory bus creates a bandwidth constraint that becomes apparent at 4K. The 320.0 GB/s bandwidth is the same figure regardless of resolution, yet the pixel data required at 3840x2160 is four times that of 1080p. This explains the consistent 35-36% performance drops between 1440p and 4K across all settings, as the memory subsystem struggles to feed the GPU's shading units with enough data at higher pixel counts.

The PassMark G3D score of 17326 and DirectX 12 score of 66 provide context for the card's gaming capabilities, while the 3DMark Steel Nomad DX12 score of 2502 indicates moderate performance in modern DirectX 12 workloads. The GPU's FP32 throughput of 13.17 TFLOPS and pixel rate of 82.30 GPixel/s are modest figures that align with its mid-range positioning in the GeForce 50-series lineup.

Measured FPS Breakdown

At 1920x1080, the combo demonstrates strong performance across all settings. Low settings yield 168 FPS average, the highest result of any configuration tested. Medium settings produce 119 FPS with a minimum of 101 FPS and maximum of 137 FPS, showing consistent frame pacing. High settings achieve 104 FPS, while Ultra settings drop to 78 FPS. The spread from Low to Ultra at 1080p is 90 FPS, indicating significant headroom for users who prefer maximum visual quality.

The 2560x1440 results show a noticeable step down. Low settings maintain 123 FPS, still comfortably above 120 FPS. Medium settings deliver 87 FPS with a minimum of 74 FPS and maximum of 100 FPS, providing a playable experience with some variance. High settings reach 76 FPS, while Ultra settings fall to 57 FPS. The 1440p results suggest that Medium is the practical ceiling for maintaining 60+ FPS averages, with High settings barely clearing that threshold.

At 3840x2160, the performance drops significantly. Low settings achieve 79 FPS, which is the only 4K result above 60 FPS. Medium settings produce 56 FPS with a minimum of 48 FPS and maximum of 65 FPS, showing notable frame dips that could cause stuttering. High settings manage only 49 FPS, while Ultra settings fall to 37 FPS. The 4K results indicate that this combo is not well-suited for high-resolution gaming unless the user is willing to accept Low settings or significant compromises in visual quality.

The minimum FPS data available for Medium settings shows the consistency of the experience. At 1080p Medium, the minimum of 101 FPS is only 18 FPS below the average, indicating stable performance. At 1440p Medium, the minimum of 74 FPS is 13 FPS below the average, still retaining playability. At 4K Medium, the minimum of 48 FPS is 8 FPS below the average, approaching the threshold where frame drops become noticeable.

How This Combo Ranks

The AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5050 combination ranks 1739 out of 2828 tested combos in Lockdown Protocol, placing it in the lower-middle portion of the database. This ranking reflects the GPU's mid-range positioning and the game's demanding nature at higher resolutions. The combo's percentile placement is consistent with the GPU's 66th percentile overall ranking, suggesting that the processor is not significantly bottlenecking or boosting performance relative to other configurations.

The CPU's benchmark scores provide context for its contribution to this ranking. The AMD Ryzen 5 7400F achieves a Cinebench R23 multicore score of 21765 and singlecore score of 3072, with a PassMark multithread score of 25645. Its average benchmark score of 32750 places it at the 83rd percentile among all CPUs, with nearest rivals including the Intel Core i5-14600T (average score 32707, deltaPct 0.1), Intel Core Ultra 7 155H (average score 32697, deltaPct 0.2), AMD Ryzen 7 PRO 6850H (average score 32812, deltaPct -0.2), and AMD Ryzen AI 7 PRO 360 (average score 32662, deltaPct 0.3). These comparisons show the 7400F performing within 0.3% of its nearest competitors, indicating balanced CPU performance for this class.

The combination's rank of 1739 out of 2828 suggests that many other configurations deliver better performance in Lockdown Protocol, likely due to more powerful GPUs. However, the rank also indicates that the combo outperforms a substantial portion of the database, with approximately 38% of tested combos falling below this configuration.

CPU Role

The AMD Ryzen 5 7400F provides the processing foundation for this combo, featuring 6 cores and 12 threads based on the Zen 4 architecture. The processor operates at a base clock of 3.70 GHz and boost clock of 4.70 GHz, with a TDP of 65 watts. The 32 MB of shared L3 cache and 1 MB L2 cache per core provide adequate data locality for gaming workloads, while the dual-channel DDR5 memory support with 83.2 GB/s bandwidth ensures the GPU receives data without significant bottlenecks.

The CPU's benchmark performance is strong for its class, with a Cinebench R23 multicore score of 21765 placing it well above the median. The PassMark single-thread score of 3689 indicates robust single-core performance, which is critical for games like Lockdown Protocol that rely on a primary game thread. The processor's 83rd percentile ranking among all CPUs suggests it is more than capable of feeding the RTX 5050 at lower resolutions, where the GPU has spare capacity.

At 1080p, the CPU's role becomes more significant as the GPU's load decreases. The 168 FPS result at Low settings suggests the CPU can sustain high frame rates without being a limiting factor, while the 78 FPS at Ultra shows the GPU taking over as the bottleneck. The data indicates that the 7400F is not the constraining component in this configuration; rather, the RTX 5050's performance ceiling at higher settings and resolutions determines overall results.

The processor's 6 cores and 12 threads are adequate for modern game engines, and the 5 nm process node from TSMC with 6,570 million transistors on a 71 mm² die size contributes to efficient operation. The CPU's nearest rivals, including the Intel Core Ultra 7 155H and AMD Ryzen AI 7 PRO 360, show nearly identical average scores, confirming that the 7400F delivers performance consistent with its market position without notable advantages or deficiencies.