Lockdown Protocol

The AMD Ryzen 5 5600G paired with the AMD Radeon RX 9060 XT 8 GB delivers a highly playable experience in Lockdown Protocol at most resolutions and settings. The data shows this combination ranks 891st out of 1637 tested combos, placing it in the upper-middle tier of systems. The measured performance is consistent with a balanced pairing where neither component consistently bottlenecks the other across the full range of graphical presets.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor built on the Zen 3 architecture. It operates with a base clock of 3.90 GHz and a boost clock of 4.40 GHz, which is sufficient for the demands of a competitive FPS like Lockdown Protocol. The CPU’s 16 MB of L3 cache and dual-channel DDR4 memory support provide adequate bandwidth for feeding the GPU with draw calls and game logic.

In synthetic benchmarks, the 5600G achieves strong results that contextualize its in-game performance. It scores 872 points in 3DMark single-thread and 5455 points in 3DMark max-threads. More relevant to gaming, the Cinebench R23 multi-core score of 16758 indicates robust multi-threaded capability, while the single-core score of 2365 suggests responsive single-thread performance. The PassMark single-thread score of 3177 and multi-thread score of 19717 further confirm that this CPU is well-equipped for modern game engines.

The CPU holds a 78th percentile ranking among all processors, placing it above the median. Its nearest rivals include the Intel Core i7-11600H, which scores within 0.2% of the 5600G, and the Intel Core i7-11800H, which is 0.2% faster on average. This tight clustering means the 5600G is squarely in the mainstream performance tier, offering no significant advantage or deficit compared to its direct competitors.

For Lockdown Protocol, the CPU’s role is most apparent at lower resolutions and settings. At 1080p Low, the system reaches 194.8 FPS, a figure that approaches the practical ceiling for many displays and indicates that the CPU is capable of feeding the GPU with enough frames to maintain high refresh rates. The 7 nm process node and 65 W TDP keep thermals manageable, allowing sustained performance without significant throttling during extended sessions.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: How does the Ryzen 5 5600G compare to its closest rivals in raw CPU performance?

A: The 5600G scores an average of 19983 in the benchmark database, placing it 0.2% above the Intel Core i7-11600H (19949) and 0.2% below the Intel Core i7-11800H (20024). It also sits 0.3% above the AMD Ryzen Threadripper PRO 5995WX (19928), making its performance essentially identical to these three chips.

*Q: What is the maximum average FPS achievable with this combo in Lockdown Protocol?*

A: The highest measured average FPS is 194.8, achieved at 1920x1080 resolution with Low settings. This is more than double the minimum measured average of 43.8 FPS, which occurs at 3840x2160 with Ultra settings.

Q: How does the GPU’s memory bandwidth influence performance at high resolutions?

A: The RX 9060 XT has a memory bandwidth of 322.3 GB/s via its 8 GB GDDR6 memory on a 128-bit bus. At 4K Ultra, the system drops to 43.8 FPS, which suggests that the 8 GB frame buffer and bandwidth are limiting factors when texture and geometry demands are highest.

Q: Is there a significant performance difference between High and Ultra settings at 1440p?

A: Yes, the data shows a drop from 87.2 FPS at High to 67.3 FPS at Ultra, a reduction of roughly 23%. This indicates that the Ultra preset imposes a substantial graphical load that the GPU struggles to maintain at higher resolutions.

Q: What is the launch MSRP of the CPU in this configuration?

A: The AMD Ryzen 5 5600G has a launch MSRP of $259. The GPU’s launch price is listed as 299 USD, but the performance data does not factor in cost-effectiveness.

Q: Does the combo exceed 60 FPS at 4K resolution?

A: It only exceeds 60 FPS at 4K with Low settings, where it achieves 89.6 FPS. At Medium it drops to 68 FPS, and at High it falls to exactly 60 FPS. Ultra settings dip below 60 FPS to 43.8 FPS.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The scaling behavior across resolutions reveals a system that becomes progressively GPU-bound as resolution increases. At 1080p Low, the system produces 194.8 FPS. Moving to 1440p Low reduces this to 144.6 FPS, a 25.8% decrease. At 4K Low, the frame rate falls further to 89.6 FPS, which is a 38.0% drop from 1440p. This steep decline with each resolution step indicates that the GPU is the primary limiting factor at lower settings.

The pattern holds for High settings. At 1080p High, the average is 120.9 FPS. At 1440p High, it drops to 87.2 FPS, a 27.9% reduction. At 4K High, it falls to 60 FPS, another 31.2% decrease. The consistent percentage drops across settings suggest that the RX 9060 XT’s compute throughput and memory bandwidth are the dominant constraints as pixel count rises.

Ultra settings exacerbate the GPU bottleneck. The system manages 92.3 FPS at 1080p Ultra, 67.3 FPS at 1440p Ultra, and only 43.8 FPS at 4K Ultra. The 52.5% reduction from 1080p to 4K Ultra is the largest relative drop in the dataset, confirming that the CPU is not the limiting component at high graphical loads. The CPU’s single-thread performance, as evidenced by its 3DMark single-thread score of 872, is adequate to keep up with the GPU’s rendering demands even at 4K.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the system delivers its best performance. Low settings yield an average of 194.8 FPS. Medium settings reduce this to 139.1 FPS, while High settings produce 120.9 FPS. Ultra settings bring the average down to 92.3 FPS. The range from Low to Ultra spans 102.5 FPS, indicating that the graphical preset has a substantial impact on frame rates at this resolution.

At 2560x1440, the averages are 144.6 FPS for Low, 99.6 FPS for Medium, 87.2 FPS for High, and 67.3 FPS for Ultra. The drop from Low to Ultra is 77.3 FPS, which is a smaller absolute difference than at 1080p but still represents a 53.5% reduction. The system comfortably exceeds 60 FPS at all settings except Ultra, where it remains above 60 FPS but with less headroom.

At 3840x2160, the lowest measured resolution begins with 89.6 FPS at Low settings. Medium settings yield 68 FPS, High settings produce exactly 60 FPS, and Ultra settings drop to 43.8 FPS. The difference between Low and Ultra at 4K is 45.8 FPS. Only the Low preset provides a frame rate that would be considered ideal for competitive play; Medium and High are playable but with noticeable compromises, and Ultra falls below the 60 FPS threshold.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 9060 XT 8 GB is a RDNA 4.0 architecture GPU built on the 4 nm process. It features 2048 shading units, 128 texture mapping units, and 64 raster operation units. The GPU operates at a base clock of 1700 MHz, a game clock of 2530 MHz, and a boost clock of 3130 MHz. Memory runs at 2518 MHz with an effective speed of 20.1 Gbps, providing 322.3 GB/s of bandwidth across the 128-bit bus.

The GPU’s 8 GB of GDDR6 memory is a critical factor in Lockdown Protocol at higher resolutions. At 4K Ultra, the system falls to 43.8 FPS, which is the lowest score in the dataset. This suggests that the 8 GB frame buffer is insufficient for the Ultra preset’s texture and geometry demands at 4K, causing the GPU to rely on slower memory spillover or reduced caching efficiency.

At lower resolutions, the GPU’s compute capabilities shine. The 25.64 TFLOPS FP32 performance and 400.6 GTexel/s texture rate allow the card to push high frame rates at 1080p. The 200.3 GPixel/s pixel rate supports the high fill rates needed for fast-paced FPS action. The GPU’s 32 ray tracing cores, while not directly benchmarked in this data, are present but do not appear to impact the measured rasterization performance.

The GPU’s 150 W TDP and PCIe 5.0 x16 interface are modern specifications, but the memory bus width of 128 bits is relatively narrow for a card in this class. This limitation becomes apparent at 4K, where the bandwidth-constrained memory subsystem struggles to keep up with the render workload. The result is a system that excels at 1080p and 1440p but requires lowered settings for smooth 4K play.