Lockdown Protocol

The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 3060 Ti combination occupies the 1402nd position out of 2828 tested combos for Lockdown Protocol. This places the pairing in the middle of the database, indicating a balanced setup that neither tops charts nor falls to the bottom. The rank suggests that while this combo is not a high-end enthusiast configuration, it delivers a consistent and playable experience across most settings, with the data showing a clear performance ceiling that is more dependent on resolution than on the CPU or GPU individually.

How This Combo Ranks

The combo’s rank of 1402 out of 2828 places it at approximately the 50th percentile of all tested configurations. This is a strong result for a mid-range pairing, as it outperforms a significant portion of the tested hardware combinations. The data indicates that the system is well-balanced for its class, with neither the AMD Ryzen 5 5500X3D nor the RTX 3060 Ti acting as a severe bottleneck in most scenarios. In practical terms, this rank means users can expect frame rates that are competitive with the majority of systems, though it will lag behind high-end rigs by a noticeable margin. The benchmark results show a system that is capable of handling the game’s demands without requiring extreme settings adjustments, but it does not have the headroom for maximum fidelity at high resolutions. The percentile positioning suggests that the combo is a reliable choice for 1080p and 1440p gaming, with the performance scaling predictably as resolution increases.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is the primary driver of graphical performance in this combo, featuring 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s. The GPU’s base clock is 1410 MHz with a boost clock of 1665 MHz, and it houses 4864 shading units, 152 texture mapping units, and 80 raster output units. The memory clock runs at 1750 MHz with an effective data rate of 14 Gbps. In Lockdown Protocol, these specifications translate to a GPU that is well-suited for 1080p and 1440p gaming, as evidenced by the measured frame rates. At 1080p with High settings, the average FPS is 121, which is a solid result that leverages the GPU’s shading and texture capabilities. The 8 GB VRAM capacity is sufficient for the game’s textures at these resolutions, though the data shows that at 4K Ultra settings, the average FPS drops to 43, indicating that the GPU’s memory bandwidth and compute power become limiting factors. The RTX 3060 Ti’s 16.20 TFLOPS of FP32 performance and 253.1 GTexel/s texture rate are the key metrics that drive the frame rates seen in the benchmark, with the GPU’s 133.2 GPixel/s pixel rate also playing a role in overall output. The data suggests that the GPU is capable of handling the game’s rendering demands up to 1440p without issue, but at 4K, the performance degrades significantly, as shown by the 57 FPS average at High settings and the 43 FPS average at Ultra.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance scaling across resolutions. At 1080p, the combo delivers high frame rates across all settings, with Low settings achieving 196 FPS, Medium at 139 FPS, High at 121 FPS, and Ultra at 91 FPS. Moving to 1440p, the frame rates drop noticeably: Low settings produce 144 FPS, Medium 102 FPS, High 89 FPS, and Ultra 67 FPS. This represents a percentage decrease of approximately 27% from 1080p to 1440p at Low settings, and a similar proportional drop at other settings. At 4K, the scaling becomes more severe, with Low settings yielding 93 FPS, Medium 66 FPS, High 57 FPS, and Ultra 43 FPS. The drop from 1440p to 4K is substantial, with Low settings falling by about 35% and Ultra settings by about 36%. This scaling pattern indicates that the limiting component shifts as resolution increases. At 1080p, the CPU’s performance is more relevant, as the GPU has enough headroom to render frames quickly, but at 4K, the GPU becomes the primary bottleneck. The data shows that the RTX 3060 Ti’s 8 GB VRAM and 448.0 GB/s bandwidth are not sufficient to maintain high frame rates at 4K, particularly at higher settings where the average FPS drops below 60. The 1440p results are the sweet spot for this combo, offering a balance between visual fidelity and performance, with High settings achieving 89 FPS, which is above the 60 FPS threshold for smooth gameplay.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend on the target resolution. At 1080p, the data shows that High settings provide an average of 121 FPS, which is well above the threshold for competitive play, while Ultra settings still deliver a playable 91 FPS. For players prioritizing frame rate, Low settings at 196 FPS would be the choice, but the visual compromise is significant. The Medium preset at 139 FPS offers a good balance, but High settings are recommended for the best experience, as they provide a high frame rate with minimal visual sacrifices. At 1440p, the data indicates that High settings at 89 FPS are the best option, as they deliver a smooth experience without overburdening the GPU. Medium settings at 102 FPS are also viable, but the increase in frame rate is modest compared to the visual quality loss. Ultra settings at 67 FPS are playable but approach the lower limit of comfort for fast-paced FPS games. At 4K, the data suggests that only Low settings at 93 FPS are recommended for a playable experience, as Medium at 66 FPS and High at 57 FPS are borderline, and Ultra at 43 FPS is not suitable for competitive play. The benchmark results show that the combo is best utilized at 1080p or 1440p with High settings, where it delivers a balanced performance that maximizes both visual quality and frame rate.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The measured data shows an average frame rate of 121 FPS at 1920x1080 resolution with High settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 resolution with Ultra settings, the average frame rate drops to 43 FPS, which is below the threshold for smooth gameplay.

Q: What is the performance difference between 1440p Low and 1440p High settings?

A: At 2560x1440 resolution, Low settings achieve 144 FPS, while High settings achieve 89 FPS, representing a significant drop of 55 FPS when increasing visual quality.

Q: Is the RTX 3060 Ti’s 8 GB VRAM sufficient for Lockdown Protocol at 1440p?

A: The data indicates that at 1440p, the combo delivers playable frame rates across all settings, with Medium at 102 FPS and High at 89 FPS, suggesting the 8 GB VRAM is adequate for this resolution.

Q: Which settings provide the highest frame rate at 4K?

A: The highest average frame rate at 4K is achieved with Low settings, which produce 93 FPS, according to the measured data.

Q: How does the combo’s rank compare to other tested configurations?

A: The combo is ranked 1402 out of 2828 tested combos, placing it in the middle of the pack, indicating a balanced mid-range performance.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture, with a base clock of 3.00 GHz and a boost clock of 4.00 GHz. It features a substantial 96 MB of shared L3 cache, which is a key factor in its performance. The CPU’s benchmarks show a Passmark multithread score of 20363 and a single-thread score of 2941, with an average benchmark score of 37018, placing it in the 85th percentile of all CPUs. In Lockdown Protocol, the CPU’s role is to feed the GPU with draw calls and game logic calculations. At 1080p, the data shows that the CPU is not the primary bottleneck, as frame rates are high across all settings, with Low settings reaching 196 FPS. This indicates that the CPU can handle the game’s demands at this resolution. The large L3 cache helps with game data access, which is beneficial for FPS games that rely on frequent data reads. The CPU’s nearest rivals, such as the AMD Ryzen 5 5600F with an average score of 36945 (0.2% delta) and the Intel Core Ultra 5 225 with a score of 36938 (0.2% delta), show that the 5500X3D is competitive within its class. At 1440p, the CPU still performs adequately, as the frame rates are more dependent on GPU load, but at 4K, the CPU’s influence diminishes further, with the GPU being the clear limiting factor. The data suggests that the CPU is well-matched with the RTX 3060 Ti, providing enough processing power to avoid holding back the GPU at lower resolutions, while the GPU takes over as the bottleneck at higher resolutions. The 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth contribute to the overall system balance, though the memory bandwidth is modest compared to newer platforms.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the combo’s performance across three resolutions and four settings levels. At 3840x2160 resolution, the average FPS values are as follows: Low settings achieve 93 FPS, Medium settings achieve 66 FPS with a minimum of 56 FPS and a maximum of 76 FPS, High settings achieve 57 FPS, and Ultra settings achieve 43 FPS. The Medium setting is the only one with min/max data, showing a range that indicates some frame time variance. At 2560x1440 resolution, the performance improves significantly: Low settings deliver 144 FPS, Medium settings deliver 102 FPS with a range of 87 to 117 FPS, High settings deliver 89 FPS, and Ultra settings deliver 67 FPS. The 1440p Medium results show a tighter frame time distribution compared to 4K, suggesting more consistent performance. At 1920x1080 resolution, the combo achieves its highest frame rates: Low settings produce 196 FPS, Medium settings produce 139 FPS with a range of 118 to 160 FPS, High settings produce 121 FPS, and Ultra settings produce 91 FPS. The 1080p Medium setting shows the widest range of frame times among the data points with min/max values, indicating that the game can experience occasional dips in frame rate at this setting. Overall, the data shows a clear progression where performance decreases as resolution increases, with the most significant drop occurring between 1440p and 4K. The Ultra settings at 4K are the most demanding, with an average of 43 FPS, which is barely playable. The Low settings at 1080p offer the highest performance at 196 FPS, which is ideal for competitive play. The data also reveals that the gap between Low and Ultra settings widens as resolution increases, with a difference of 105 FPS at 1080p, 77 FPS at 1440p, and 50 FPS at 4K. This pattern indicates that the GPU’s limitations become more apparent at higher resolutions, where the difference between Low and Ultra settings has less impact on frame rate. The combo’s performance is consistent with its mid-range rank, offering playable frame rates at 1080p and 1440p, but struggling to maintain high frame rates at 4K, particularly at higher settings. The data suggests that for the best experience, users should target 1440p with High settings, where the average FPS of 89 provides a smooth gameplay experience without the need to compromise on visual quality.