Inside

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 3050 4 GB produces a playable but heavily GPU-limited experience in Inside, with the data showing that the 4 GB VRAM capacity becomes the primary constraint at higher settings. The combo ranks 1514th out of 1671 tested combinations, placing it in the bottom tenth of the database, a position driven almost entirely by the graphics card's modest specifications rather than the processor.

Resolution Scaling

The frame rate drop from 1080p to 4K reveals a textbook GPU-bound scenario. At Low settings, the average FPS falls from 200.2 at 1920x1080 to 143.9 at 2560x1440, then to 87.8 at 3840x2160. That is a 28.1% reduction from 1080p to 1440p, followed by a further 39.0% drop from 1440p to 4K. The total scaling from 1080p to 4K is a 56.1% loss in average FPS, which is consistent with a card whose 192.0 GB/s memory bandwidth and 4 GB frame buffer are being saturated as pixel count quadruples.

At Ultra settings, the pattern intensifies. The average FPS is 93.9 at 1080p, 67.9 at 1440p, and 40.5 at 4K. The 1080p-to-1440p drop is 27.7%, and the 1440p-to-4K drop is 40.4%. The 4K Ultra result of 40.5 FPS is barely above the 1080p Low result of 200.2 FPS divided by five, indicating that the GPU is struggling more with shading and memory pressure than with raw resolution alone. The limiting component is unambiguously the RTX 3050 4 GB, as the CPU's 8-core, 16-thread configuration with a 5.00 GHz boost clock would not be challenged by this puzzle platformer's physics and logic workloads.

How This Combo Ranks

The combo ranks 1514th out of 1671 tested combos, which places it in the 9.4th percentile of all systems in the database for Inside. This is a low position, and the data suggests it is not due to the processor. The Ryzen 7 7800X3D sits in the 87th percentile against all CPUs, with an average benchmark score of 31580. Its nearest rival, the Intel Core i7-12700F, scores 31543, a delta of only 0.1%. The AMD Ryzen 7 8700G and AMD Ryzen 7 7745HX both score 31407 and 31402 respectively, with deltas of 0.6%. The 7800X3D is therefore statistically tied with these chips in synthetic workloads.

The GPU, however, sits in the 50th percentile against all GPUs, with no benchmark scores or nearest rivals listed. In Inside, the measured FPS numbers confirm that the RTX 3050 4 GB is the bottleneck. At 1080p Low, the combo achieves 200.2 FPS, which is high, but at 4K Ultra it drops to 40.5 FPS. The combination's poor rank is a direct result of the GPU's 4 GB memory and 128-bit bus, which cannot sustain high detail levels at high resolutions. The CPU would be capable of far higher frame rates if paired with a stronger GPU, but as configured, the system is held back by the graphics card.

FAQ

*Q: What is the best resolution to play Inside with this combo?*

A: The data shows that 1920x1080 is the only resolution where all settings presets remain playable. At 1080p, even Ultra averages 93.9 FPS, while at 1440p, Ultra drops to 67.9 FPS and at 4K, Ultra falls to 40.5 FPS.

*Q: Does the CPU limit performance in Inside?*

A: No. The Ryzen 7 7800X3D has 8 cores, 16 threads, and a 5.00 GHz boost clock, with an average benchmark score of 31580 placing it in the 87th CPU percentile. The measured FPS differences across resolutions and settings are consistent with GPU limitations, not CPU processing power.

Q: How much faster is Low settings compared to Ultra at 4K?

A: At 3840x2160, Low averages 87.8 FPS while Ultra averages 40.5 FPS. Low is 2.17 times faster, or 116.8% higher FPS. The difference is less pronounced at 1080p, where Low hits 200.2 FPS versus Ultra's 93.9 FPS, a 2.13 times improvement.

Q: Is 1440p a viable resolution for this combo?

A: At 2560x1440, Medium settings average 116.8 FPS, which is smooth. High settings average 68.9 FPS, which is still playable. However, Ultra at 1440p drops to 67.9 FPS, which is close to the High result and suggests diminishing returns from the extra settings overhead.

*Q: Why does the 4 GB VRAM matter for Inside?*

A: The GPU has 4 GB of GDDR6 memory on a 128-bit bus with 192.0 GB/s bandwidth. The frame rate scaling from Low to Ultra at each resolution shows that the memory subsystem is saturated. At 4K, the difference between Low (87.8 FPS) and High (44 FPS) is 43.8 FPS, indicating that texture and geometry data exceeds the 4 GB capacity at higher presets.

Q: What is the combo's rank among all tested systems?

A: The combo ranks 1514th out of 1671 tested combinations for Inside. This places it in the bottom 9.4% of all systems, a position that is primarily attributable to the RTX 3050 4 GB's performance level rather than the CPU.

Measured FPS Breakdown

At 1920x1080, the RTX 3050 4 GB delivers its strongest results. Low settings average 200.2 FPS, Medium averages 158.2 FPS, High averages 99.5 FPS, and Ultra averages 93.9 FPS. The gap between High and Ultra is only 5.6 FPS, suggesting that the Ultra preset adds little visual benefit for the performance cost at this resolution.

At 2560x1440, the averages are 143.9 FPS for Low, 116.8 FPS for Medium, 68.9 FPS for High, and 67.9 FPS for Ultra. The Medium-to-High drop is 47.9 FPS, which is a substantial 41.0% reduction. The High-to-Ultra difference is negligible at 1.0 FPS, meaning that the Ultra preset at 1440p is essentially the same performance as High.

At 3840x2160, Low averages 87.8 FPS, Medium averages 72.1 FPS, High averages 44 FPS, and Ultra averages 40.5 FPS. The Medium-to-High drop is 28.1 FPS, a 39.0% reduction. The Low-to-Medium gap is 15.7 FPS, and the High-to-Ultra gap is 3.5 FPS. The 4K results show that the GPU can handle lower presets but fails to maintain playable frame rates above Medium, with High and Ultra both falling below 45 FPS.

Across all resolutions, the pattern is consistent: the RTX 3050 4 GB is capable of high frame rates at Low and Medium settings, but the transition to High and Ultra incurs steep penalties. At 1080p, the penalty from Medium to High is 58.7 FPS (37.1%). At 1440p, it is 47.9 FPS (41.0%). At 4K, it is 28.1 FPS (39.0%). The relative penalty is stable, indicating that the GPU's shading units and memory bandwidth are the limiting factors, not the CPU.

CPU Role

The AMD Ryzen 7 7800X3D is a 7000-series processor built on the Zen 4 architecture with the Raphael codename. It has 8 cores and 16 threads, with a base clock of 4.20 GHz and a boost clock of 5.00 GHz. The 96 MB of shared L3 cache is a defining feature, and the CPU supports DDR5 memory with dual-channel bandwidth of 83.2 GB/s. In synthetic benchmarks, it scores 29149 in Cinebench R23 multi-core and 4115 in single-core, with a Geekbench multi-core score of 15101 and a single-core score of 2725.

For Inside, a puzzle platformer, the CPU's role is minimal. The game's logic and physics are not heavily threaded, and the 7800X3D's 16 threads are far more than required. The 3DMark scores reinforce this: 7980 for 16 threads, 6539 for 8 threads, and 959 for single-thread. The single-thread score is the most relevant for this game, and it is sufficient to feed the GPU at all tested settings. The measured FPS differences across resolutions are identical in pattern, with no sign of CPU-induced frame rate drops. The 7800X3D's percentile of 87 against all CPUs confirms that it is a top-tier processor, but in this combo, it is effectively idle while the GPU works at full load.

Settings Recommendations

The data shows that Medium settings provide the best balance of performance and visual quality for this combo. At 1080p, Medium averages 158.2 FPS, which is 58.7 FPS higher than High and only 42 FPS lower than Low. At 1440p, Medium averages 116.8 FPS, which is 47.9 FPS higher than High and 27.1 FPS lower than Low. At 4K, Medium averages 72.1 FPS, which is 28.1 FPS higher than High and 15.7 FPS lower than Low.

High settings offer no meaningful advantage over Medium in terms of frame rate stability. At 1440p, High (68.9 FPS) and Ultra (67.9 FPS) are nearly identical, and both are below the 72.1 FPS of Medium. At 4K, High (44 FPS) and Ultra (40.5 FPS) are both below 45 FPS, which is borderline playable, but Medium at 72.1 FPS is clearly superior. The only reason to choose High or Ultra would be for visual fidelity, but the 4 GB VRAM causes the GPU to struggle with these presets, making Medium the pragmatic choice.

Low settings are only recommended if the user prioritizes maximum frame rate above all else. At 1080p, Low hits 200.2 FPS, and at 1440p it reaches 143.9 FPS. However, the visual downgrade from Medium to Low is likely noticeable, and the frame rate gain is not necessary for a puzzle platformer. Medium is the sweet spot, delivering smooth gameplay at all resolutions without the steep penalties of High and Ultra.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is an Ampere architecture GPU with 2048 shading units, 64 TMUs, and 32 ROPs. It has 16 RT cores and 64 tensor cores, with a base clock of 1545 MHz and a boost clock of 1740 MHz. The 4 GB of GDDR6 memory runs at 1500 MHz with a 12 Gbps effective rate, delivering 192.0 GB/s bandwidth over a 128-bit bus. The GPU's FP32 performance is 7.127 TFLOPS, and it is built on Samsung's 8 nm process with 8,700 million transistors on a 200 mm² die.

In Inside, the GPU is the dominant factor in performance. The 4 GB memory capacity is the primary limitation, as evidenced by the steep FPS drops when moving from Medium to High at all resolutions. At 1080p, the High preset (99.5 FPS) is 58.7 FPS lower than Medium (158.2 FPS), and at 1440p, the gap is 47.9 FPS. The 128-bit memory bus and 192.0 GB/s bandwidth cannot sustain the higher texture and geometry loads of High and Ultra presets, leading to the observed frame rate penalties.

The 50th percentile ranking against all GPUs places the RTX 3050 4 GB in the middle of the pack, but its end-of-life production status and the lack of benchmark scores in the database suggest it is a lower-tier card. The measured FPS in Inside confirms this: the card can handle 1080p and 1440p at Medium settings with ease, but 4K is only playable at Low and Medium. The GPU's 90 W TDP and 250 W suggested PSU are modest, but the performance ceiling is clear. For Inside, the RTX 3050 4 GB is best used at 1080p or 1440p with Medium settings, where it delivers frame rates well above 100 FPS.